public inbox for [email protected]help / color / mirror / Atom feed
[PATCH 05/12] (re)add wal_compression_method: lz4 130+ messages / 4 participants [nested] [flat]
* [PATCH 05/12] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- doc/src/sgml/config.sgml | 3 ++- src/backend/access/transam/xlog.c | 3 +++ src/backend/access/transam/xloginsert.c | 17 ++++++++++++++++- src/backend/access/transam/xlogreader.c | 12 ++++++++++++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + 6 files changed, 35 insertions(+), 3 deletions(-) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index bed89d055d..1f21e96922 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 3ece007922..23f5bdc335 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index 530007f55a..2a2bccbe5c 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); -- 2.17.0 --45Z9DzgjV8m4Oswq Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-add-wal_compression_method-zstd.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/12] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- doc/src/sgml/config.sgml | 3 ++- src/backend/access/transam/xlog.c | 3 +++ src/backend/access/transam/xloginsert.c | 17 ++++++++++++++++- src/backend/access/transam/xlogreader.c | 12 ++++++++++++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + 6 files changed, 35 insertions(+), 3 deletions(-) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index bed89d055d..1f21e96922 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 3ece007922..23f5bdc335 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index 530007f55a..2a2bccbe5c 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); -- 2.17.0 --45Z9DzgjV8m4Oswq Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-add-wal_compression_method-zstd.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH v7 5/9] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- doc/src/sgml/config.sgml | 3 ++- doc/src/sgml/install-windows.sgml | 2 +- doc/src/sgml/installation.sgml | 5 +++-- src/backend/access/transam/xlog.c | 3 +++ src/backend/access/transam/xloginsert.c | 17 ++++++++++++++++- src/backend/access/transam/xlogreader.c | 12 ++++++++++++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + 8 files changed, 39 insertions(+), 6 deletions(-) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 70effa6345..f2209f5df0 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3147,7 +3147,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/doc/src/sgml/install-windows.sgml b/doc/src/sgml/install-windows.sgml index db53ee85a8..a023584722 100644 --- a/doc/src/sgml/install-windows.sgml +++ b/doc/src/sgml/install-windows.sgml @@ -299,7 +299,7 @@ $ENV{MSBFLAGS}="/m"; <term><productname>LZ4</productname></term> <listitem><para> Required for supporting <productname>LZ4</productname> compression - method for compressing the table data. Binaries and source can be + method for compressing table or WAL data. Binaries and source can be downloaded from <ulink url="https://github.com/lz4/lz4/releases"></ulink;. </para></listitem> diff --git a/doc/src/sgml/installation.sgml b/doc/src/sgml/installation.sgml index 3c0aa118c7..7c8cdac25a 100644 --- a/doc/src/sgml/installation.sgml +++ b/doc/src/sgml/installation.sgml @@ -270,7 +270,8 @@ su - postgres <para> You need <productname>LZ4</productname>, if you want to support compression of data with this method; see - <xref linkend="guc-default-toast-compression"/>. + <xref linkend="guc-default-toast-compression"/> and + <xref linkend="guc-wal-compression-method"/>. </para> </listitem> @@ -980,7 +981,7 @@ build-postgresql: <para> Build with <productname>LZ4</productname> compression support. This allows the use of <productname>LZ4</productname> for - compression of table data. + compression of table and WAL data. </para> </listitem> </varlistentry> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index a43e04fc0b..999896487e 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 5ab07621d6..30804e8cd5 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index baed4d9228..6421ddbde8 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -219,7 +219,7 @@ #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_init_zero = on # zero-fill new WAL files #wal_recycle = on # recycle WAL files #wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index ceca0f7189..fc57ea728e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); -- 2.17.0 --JYK4vJDZwFMowpUq Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v7-0006-add-wal_compression_method-zstd.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 17 +- src/backend/access/transam/xlogreader.c | 12 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 241 insertions(+), 3 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index a93b33464f..3c15286bd8 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -891,6 +898,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 0d8830fc50..97165f1bb1 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1544,6 +1548,7 @@ XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len) struct walcompression walmethods[] = { {"pglz", WAL_COMPRESSION_PGLZ}, {"zlib", WAL_COMPRESSION_ZLIB}, + {"lz4", WAL_COMPRESSION_LZ4}, }; /* @@ -1609,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b000a21557..b908fa48de 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -336,6 +336,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --jozmn01XJZjDjM3N Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 5/8] (re)add wal_compression_method=lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 12 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 8 files changed, 234 insertions(+) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index ee73bc3afd..38ac5f9e94 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 143df55fcb..920c47e4d7 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1607,6 +1613,12 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, bkpb->bimg_len, BLCKSZ); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index b80759ed45..0993de784e 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ = 0, WAL_COMPRESSION_ZLIB = 1, + WAL_COMPRESSION_LZ4 = 2, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --f0KYrhQ4vYSV2aJu Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..f33355e44a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0005-re-add-wal_compression_method-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: LZ4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++++++++ configure.ac | 26 ++++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 5 +- src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 9 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index fad817bb38..9b590eb432 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13378,6 +13518,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 0ed53571dd..2b3b5676eb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1407,6 +1422,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 8bae73b4ec..609d954a3a 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -99,7 +99,7 @@ bool EnableHotStandby = false; bool fullPageWrites = true; bool wal_log_hints = false; bool wal_compression = false; -int wal_compression_method = WAL_COMPRESSION_ZLIB; +int wal_compression_method = WAL_COMPRESSION_LZ4; char *wal_consistency_checking_string = NULL; bool *wal_consistency_checking = NULL; bool wal_init_zero = true; @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --0qVF/w3MHQqLSynd Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH 05/10] (re)add wal_compression_method: lz4 @ 2021-03-12 20:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-03-12 20:32 UTC (permalink / raw) --- configure | 176 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 3 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 12 ++ src/backend/access/transam/xlogreader.c | 13 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 238 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 3fd4cecbeb..fed440adcf 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +LZ4_LIBS +LZ4_CFLAGS +with_lz4 with_zlib with_system_tzdata with_libxslt @@ -864,6 +867,7 @@ with_libxml with_libxslt with_system_tzdata with_zlib +with_lz4 with_gnu_ld with_ssl with_openssl @@ -891,6 +895,8 @@ ICU_LIBS XML2_CONFIG XML2_CFLAGS XML2_LIBS +LZ4_CFLAGS +LZ4_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1569,6 +1575,7 @@ Optional Packages: --with-system-tzdata=DIR use system time zone data in DIR --without-zlib do not use Zlib + --with-lz4 build with LZ4 support --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1596,6 +1603,8 @@ Some influential environment variables: XML2_CONFIG path to xml2-config utility XML2_CFLAGS C compiler flags for XML2, overriding pkg-config XML2_LIBS linker flags for XML2, overriding pkg-config + LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config + LZ4_LIBS linker flags for LZ4, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8563,6 +8572,137 @@ fi +# +# LZ4 +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with LZ4 support" >&5 +$as_echo_n "checking whether to build with LZ4 support... " >&6; } + + + +# Check whether --with-lz4 was given. +if test "${with_lz4+set}" = set; then : + withval=$with_lz4; + case $withval in + yes) + +$as_echo "#define USE_LZ4 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-lz4 option" "$LINENO" 5 + ;; + esac + +else + with_lz4=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_lz4" >&5 +$as_echo "$with_lz4" >&6; } + + +if test "$with_lz4" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liblz4" >&5 +$as_echo_n "checking for liblz4... " >&6; } + +if test -n "$LZ4_CFLAGS"; then + pkg_cv_LZ4_CFLAGS="$LZ4_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_CFLAGS=`$PKG_CONFIG --cflags "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$LZ4_LIBS"; then + pkg_cv_LZ4_LIBS="$LZ4_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"liblz4\""; } >&5 + ($PKG_CONFIG --exists --print-errors "liblz4") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_LZ4_LIBS=`$PKG_CONFIG --libs "liblz4" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + LZ4_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblz4" 2>&1` + else + LZ4_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblz4" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$LZ4_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (liblz4) were not met: + +$LZ4_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables LZ4_CFLAGS +and LZ4_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + LZ4_CFLAGS=$pkg_cv_LZ4_CFLAGS + LZ4_LIBS=$pkg_cv_LZ4_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13381,6 +13521,42 @@ fi fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + for ac_header in lz4/lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4/lz4.h" "ac_cv_header_lz4_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_LZ4_H 1 +_ACEOF + +else + for ac_header in lz4.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "lz4.h" "ac_cv_header_lz4_h" "$ac_includes_default" +if test "x$ac_cv_header_lz4_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LZ4_H 1 +_ACEOF + +else + as_fn_error $? "lz4.h header file is required for LZ4" "$LINENO" 5 +fi + +done + +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index 2f1585adc0..8c454128bb 100644 --- a/configure.ac +++ b/configure.ac @@ -986,6 +986,21 @@ PGAC_ARG_BOOL(with, zlib, yes, [do not use Zlib]) AC_SUBST(with_zlib) +# +# LZ4 +# +AC_MSG_CHECKING([whether to build with LZ4 support]) +PGAC_ARG_BOOL(with, lz4, no, [build with LZ4 support], + [AC_DEFINE([USE_LZ4], 1, [Define to 1 to build with LZ4 support. (--with-lz4)])]) +AC_MSG_RESULT([$with_lz4]) +AC_SUBST(with_lz4) + +if test "$with_lz4" = yes; then + PKG_CHECK_MODULES(LZ4, liblz4) + LIBS="$LZ4_LIBS $LIBS" + CFLAGS="$LZ4_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1410,6 +1425,17 @@ failure. It is possible the compiler isn't looking in the proper directory. Use --without-zlib to disable zlib support.])]) fi +if test "$with_lz4" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$LZ4_CFLAGS $CPPFLAGS" + + # Verify we have LZ4's header files + AC_CHECK_HEADERS(lz4/lz4.h, [], + [AC_CHECK_HEADERS(lz4.h, [], [AC_MSG_ERROR([lz4.h header file is required for LZ4])])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 7fb2a84626..257775c83b 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3082,7 +3082,8 @@ include_dir 'conf.d' <para> This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index f5d4450654..984ce39cc7 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -186,6 +186,9 @@ const struct config_enum_entry wal_compression_options[] = { {"pglz", WAL_COMPRESSION_PGLZ, false}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 34e1227381..9fe5c30236 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -884,6 +888,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, PGLZ_MAX_BLCKSZ, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index afca22a26c..fa1e38a810 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -37,6 +37,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1558,6 +1562,8 @@ wal_compression_name(WalCompression compression) return "pglz"; case WAL_COMPRESSION_ZLIB: return "zlib"; + case WAL_COMPRESSION_LZ4: + return "lz4"; default: return "???"; } @@ -1608,6 +1614,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index ef69a94492..76f494cb9b 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib +#wal_compression_method = pglz # pglz, zlib, lz4 #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index d653839b97..e70886b81c 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -328,6 +328,7 @@ typedef enum WalCompression { WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 7a7cc21d8d..0a6422da4f 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -899,6 +899,9 @@ /* Define to 1 to build with LLVM based JIT support. (--with-llvm) */ #undef USE_LLVM +/* Define to 1 to build with LZ4 support (--with-lz4) */ +#undef USE_LZ4 + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index a4f5cc4bdb..14605371bb 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -485,6 +485,7 @@ sub GenerateFiles USE_ICU => $self->{options}->{icu} ? 1 : undef, USE_LIBXML => undef, USE_LIBXSLT => undef, + USE_LZ4 => undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH v9 5/9] (re)add wal_compression_method: lz4 @ 2021-05-25 04:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-05-25 04:32 UTC (permalink / raw) --- doc/src/sgml/config.sgml | 3 ++- doc/src/sgml/install-windows.sgml | 2 +- doc/src/sgml/installation.sgml | 5 +++-- src/backend/access/transam/xloginsert.c | 17 ++++++++++++++++- src/backend/access/transam/xlogreader.c | 15 +++++++++++++++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/access/xlogrecord.h | 2 +- 8 files changed, 40 insertions(+), 7 deletions(-) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 1df56d8034..df5ff70d91 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3140,7 +3140,8 @@ include_dir 'conf.d' server compresses full page images written to WAL when <xref linkend="guc-full-page-writes"/> is on or during a base backup. A compressed page image will be decompressed during WAL replay. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>off</literal>. Only superusers can change this setting. </para> diff --git a/doc/src/sgml/install-windows.sgml b/doc/src/sgml/install-windows.sgml index 312edc6f7a..ba794b8c93 100644 --- a/doc/src/sgml/install-windows.sgml +++ b/doc/src/sgml/install-windows.sgml @@ -299,7 +299,7 @@ $ENV{MSBFLAGS}="/m"; <term><productname>LZ4</productname></term> <listitem><para> Required for supporting <productname>LZ4</productname> compression - method for compressing the table data. Binaries and source can be + method for compressing table or WAL data. Binaries and source can be downloaded from <ulink url="https://github.com/lz4/lz4/releases"></ulink;. </para></listitem> diff --git a/doc/src/sgml/installation.sgml b/doc/src/sgml/installation.sgml index 073d5089f7..c7673a4dc8 100644 --- a/doc/src/sgml/installation.sgml +++ b/doc/src/sgml/installation.sgml @@ -270,7 +270,8 @@ su - postgres <para> You need <productname>LZ4</productname>, if you want to support compression of data with this method; see - <xref linkend="guc-default-toast-compression"/>. + <xref linkend="guc-default-toast-compression"/> and + <xref linkend="guc-wal-compression"/>. </para> </listitem> @@ -980,7 +981,7 @@ build-postgresql: <para> Build with <productname>LZ4</productname> compression support. This allows the use of <productname>LZ4</productname> for - compression of table data. + compression of table and WAL data. </para> </listitem> </varlistentry> diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 4f81f19c49..a8794a941a 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -889,6 +896,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 3a922caaeb..e44817fece 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -38,6 +38,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -75,6 +79,10 @@ const struct config_enum_entry wal_compression_options[] = { {"zlib", WAL_COMPRESSION_ZLIB, false}, #endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, +#endif + {NULL, 0, false} }; @@ -1624,6 +1632,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index 61786c6e07..728acef953 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -218,7 +218,7 @@ #full_page_writes = on # recover from partial page writes #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) -#wal_compression = off # enable compression of full-page writes: off, pglz, zlib +#wal_compression = off # enable compression of full-page writes: off, pglz, zlib, lz4 #wal_init_zero = on # zero-fill new WAL files #wal_recycle = on # recycle WAL files #wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index 8b740af66d..0287592cd4 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -330,6 +330,7 @@ typedef enum WalCompression WAL_COMPRESSION_NONE, WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/access/xlogrecord.h b/src/include/access/xlogrecord.h index 2a60c0fb92..abb42b364d 100644 --- a/src/include/access/xlogrecord.h +++ b/src/include/access/xlogrecord.h @@ -147,7 +147,7 @@ typedef struct XLogRecordBlockImageHeader #define BKPIMAGE_APPLY 0x02 /* page image should be restored during * replay */ #define BKPIMAGE_COMPRESS_METHOD1 0x04 /* bits to encode compression method */ -#define BKPIMAGE_COMPRESS_METHOD2 0x08 /* 0=none, 1=pglz, 2=zlib */ +#define BKPIMAGE_COMPRESS_METHOD2 0x08 /* 0=none, 1=pglz, 2=zlib, 3=lz4 */ /* How many bits to shift to extract compression */ #define BKPIMAGE_COMPRESS_OFFSET_BITS 2 -- 2.17.0 --neYutvxvOLaeuPCA Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v9-0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* [PATCH v8 5/9] (re)add wal_compression_method: lz4 @ 2021-05-25 04:32 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: Justin Pryzby @ 2021-05-25 04:32 UTC (permalink / raw) --- doc/src/sgml/config.sgml | 3 ++- doc/src/sgml/install-windows.sgml | 2 +- doc/src/sgml/installation.sgml | 5 +++-- src/backend/access/transam/xloginsert.c | 17 ++++++++++++++++- src/backend/access/transam/xlogreader.c | 14 ++++++++++++++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/access/xlogrecord.h | 2 +- 8 files changed, 39 insertions(+), 7 deletions(-) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 218a98cfc6..352b31fa81 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3126,7 +3126,8 @@ include_dir 'conf.d' server compresses full page images written to WAL when <xref linkend="guc-full-page-writes"/> is on or during a base backup. A compressed page image will be decompressed during WAL replay. - The supported methods are pglz and zlib. + The supported methods are pglz, zlib, and (if configured when + <productname>PostgreSQL</productname> was built) lz4. The default value is <literal>off</literal>. Only superusers can change this setting. </para> diff --git a/doc/src/sgml/install-windows.sgml b/doc/src/sgml/install-windows.sgml index db53ee85a8..a023584722 100644 --- a/doc/src/sgml/install-windows.sgml +++ b/doc/src/sgml/install-windows.sgml @@ -299,7 +299,7 @@ $ENV{MSBFLAGS}="/m"; <term><productname>LZ4</productname></term> <listitem><para> Required for supporting <productname>LZ4</productname> compression - method for compressing the table data. Binaries and source can be + method for compressing table or WAL data. Binaries and source can be downloaded from <ulink url="https://github.com/lz4/lz4/releases"></ulink;. </para></listitem> diff --git a/doc/src/sgml/installation.sgml b/doc/src/sgml/installation.sgml index 073d5089f7..c7673a4dc8 100644 --- a/doc/src/sgml/installation.sgml +++ b/doc/src/sgml/installation.sgml @@ -270,7 +270,8 @@ su - postgres <para> You need <productname>LZ4</productname>, if you want to support compression of data with this method; see - <xref linkend="guc-default-toast-compression"/>. + <xref linkend="guc-default-toast-compression"/> and + <xref linkend="guc-wal-compression"/>. </para> </listitem> @@ -980,7 +981,7 @@ build-postgresql: <para> Build with <productname>LZ4</productname> compression support. This allows the use of <productname>LZ4</productname> for - compression of table data. + compression of table and WAL data. </para> </listitem> </varlistentry> diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 4f81f19c49..a8794a941a 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,10 +41,17 @@ #define ZLIB_MAX_BLCKSZ 0 #endif +#ifdef USE_LZ4 +#include "lz4.h" +#define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ) +#else +#define LZ4_MAX_BLCKSZ 0 +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) -#define COMPRESS_BUFSIZE Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ) +#define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, ZLIB_MAX_BLCKSZ), LZ4_MAX_BLCKSZ) /* * For each block reference registered with XLogRegisterBuffer, we fill in @@ -889,6 +896,14 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + len = LZ4_compress_fast(source, dest, orig_len, COMPRESS_BUFSIZE, 1); + if (len == 0) + len = -1; + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index 822b2612cd..753b38e58a 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -38,6 +38,10 @@ #include <zlib.h> #endif +#ifdef USE_LZ4 +#include "lz4.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -72,6 +76,9 @@ const struct config_enum_entry wal_compression_options[] = { {"1", WAL_COMPRESSION_PGLZ, true}, #ifdef HAVE_LIBZ {"zlib", WAL_COMPRESSION_ZLIB, false}, +#endif +#ifdef USE_LZ4 + {"lz4", WAL_COMPRESSION_LZ4, false}, #endif {NULL, 0, false} }; @@ -1622,6 +1629,13 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) } #endif +#ifdef USE_LZ4 + case WAL_COMPRESSION_LZ4: + decomp_result = LZ4_decompress_safe(ptr, tmp.data, + bkpb->bimg_len, BLCKSZ-bkpb->hole_length); + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index 3991d35afd..dbf3155502 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -218,7 +218,7 @@ #full_page_writes = on # recover from partial page writes #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) -#wal_compression = off # enable compression of full-page writes: off, pglz, zlib +#wal_compression = off # enable compression of full-page writes: off, pglz, zlib, lz4 #wal_init_zero = on # zero-fill new WAL files #wal_recycle = on # recycle WAL files #wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index 8b740af66d..0287592cd4 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -330,6 +330,7 @@ typedef enum WalCompression WAL_COMPRESSION_NONE, WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, + WAL_COMPRESSION_LZ4, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/access/xlogrecord.h b/src/include/access/xlogrecord.h index 2a60c0fb92..abb42b364d 100644 --- a/src/include/access/xlogrecord.h +++ b/src/include/access/xlogrecord.h @@ -147,7 +147,7 @@ typedef struct XLogRecordBlockImageHeader #define BKPIMAGE_APPLY 0x02 /* page image should be restored during * replay */ #define BKPIMAGE_COMPRESS_METHOD1 0x04 /* bits to encode compression method */ -#define BKPIMAGE_COMPRESS_METHOD2 0x08 /* 0=none, 1=pglz, 2=zlib */ +#define BKPIMAGE_COMPRESS_METHOD2 0x08 /* 0=none, 1=pglz, 2=zlib, 3=lz4 */ /* How many bits to shift to extract compression */ #define BKPIMAGE_COMPRESS_OFFSET_BITS 2 -- 2.17.0 --P+33d92oIH25kiaB Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v8-0006-Default-to-LZ4.patch" ^ permalink raw reply [nested|flat] 130+ messages in thread
* Simplify some codes in pgoutput @ 2023-03-15 08:29 [email protected] <[email protected]> 0 siblings, 2 replies; 130+ messages in thread From: [email protected] @ 2023-03-15 08:29 UTC (permalink / raw) To: PostgreSQL Hackers <[email protected]> Hi, I noticed that there are some duplicated codes in pgoutput_change() function which can be simplified, and here is an attempt to do that. Best Regards, Hou Zhijie Attachments: [application/octet-stream] 0001-simplify-the-code-in-pgoutput_change.patch (7.7K, ../../OS0PR01MB5716194A47FFA8D91133687D94BF9@OS0PR01MB5716.jpnprd01.prod.outlook.com/2-0001-simplify-the-code-in-pgoutput_change.patch) download | inline diff: From 76ab9f02a71c3c2dcae7d87681a29c011ad67a98 Mon Sep 17 00:00:00 2001 From: Hou Zhijie <[email protected]> Date: Wed, 15 Mar 2023 15:57:13 +0800 Subject: [PATCH] simplify the code in pgoutput_change --- src/backend/replication/pgoutput/pgoutput.c | 204 +++++--------------- 1 file changed, 51 insertions(+), 153 deletions(-) diff --git a/src/backend/replication/pgoutput/pgoutput.c b/src/backend/replication/pgoutput/pgoutput.c index 00a2d73dab..fdaaaa1922 100644 --- a/src/backend/replication/pgoutput/pgoutput.c +++ b/src/backend/replication/pgoutput/pgoutput.c @@ -1448,173 +1448,68 @@ pgoutput_change(LogicalDecodingContext *ctx, ReorderBufferTXN *txn, /* Avoid leaking memory by using and resetting our own context */ old = MemoryContextSwitchTo(data->context); - /* Send the data */ - switch (action) + /* Switch relation if publishing via root. */ + if (relentry->publish_as_relid != RelationGetRelid(relation)) { - case REORDER_BUFFER_CHANGE_INSERT: - new_slot = relentry->new_slot; - ExecStoreHeapTuple(&change->data.tp.newtuple->tuple, - new_slot, false); + Assert(relation->rd_rel->relispartition); + ancestor = RelationIdGetRelation(relentry->publish_as_relid); + targetrel = ancestor; + } - /* Switch relation if publishing via root. */ - if (relentry->publish_as_relid != RelationGetRelid(relation)) - { - Assert(relation->rd_rel->relispartition); - ancestor = RelationIdGetRelation(relentry->publish_as_relid); - targetrel = ancestor; - /* Convert tuple if needed. */ - if (relentry->attrmap) - { - TupleDesc tupdesc = RelationGetDescr(targetrel); + if (change->data.tp.newtuple) + { + new_slot = relentry->new_slot; + ExecStoreHeapTuple(&change->data.tp.newtuple->tuple, new_slot, false); - new_slot = execute_attr_map_slot(relentry->attrmap, - new_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); - } - } + if (relentry->attrmap) + new_slot = execute_attr_map_slot(relentry->attrmap, new_slot, + MakeTupleTableSlot(RelationGetDescr(targetrel), + &TTSOpsVirtual)); + } - /* Check row filter */ - if (!pgoutput_row_filter(targetrel, NULL, &new_slot, relentry, - &action)) - break; + if (change->data.tp.oldtuple) + { + old_slot = relentry->old_slot; + ExecStoreHeapTuple(&change->data.tp.oldtuple->tuple, old_slot, false); - /* - * Send BEGIN if we haven't yet. - * - * We send the BEGIN message after ensuring that we will actually - * send the change. This avoids sending a pair of BEGIN/COMMIT - * messages for empty transactions. - */ - if (txndata && !txndata->sent_begin_txn) - pgoutput_send_begin(ctx, txn); + if (relentry->attrmap) + old_slot = execute_attr_map_slot(relentry->attrmap, old_slot, + MakeTupleTableSlot(RelationGetDescr(targetrel), + &TTSOpsVirtual)); + } - /* - * Schema should be sent using the original relation because it - * also sends the ancestor's relation. - */ - maybe_send_schema(ctx, change, relation, relentry); + /* + * Check row filter. + * + * Updates could be transformed to inserts or deletes based on the results + * of the row filter for old and new tuple. + */ + if (!pgoutput_row_filter(targetrel, old_slot, &new_slot, relentry, &action)) + goto cleanup; - OutputPluginPrepareWrite(ctx, true); + /* Send BEGIN if we haven't yet */ + if (txndata && !txndata->sent_begin_txn) + pgoutput_send_begin(ctx, txn); + + maybe_send_schema(ctx, change, relation, relentry); + + OutputPluginPrepareWrite(ctx, true); + + /* Send the data */ + switch (action) + { + case REORDER_BUFFER_CHANGE_INSERT: logicalrep_write_insert(ctx->out, xid, targetrel, new_slot, data->binary, relentry->columns); - OutputPluginWrite(ctx, true); break; case REORDER_BUFFER_CHANGE_UPDATE: - if (change->data.tp.oldtuple) - { - old_slot = relentry->old_slot; - ExecStoreHeapTuple(&change->data.tp.oldtuple->tuple, - old_slot, false); - } - - new_slot = relentry->new_slot; - ExecStoreHeapTuple(&change->data.tp.newtuple->tuple, - new_slot, false); - - /* Switch relation if publishing via root. */ - if (relentry->publish_as_relid != RelationGetRelid(relation)) - { - Assert(relation->rd_rel->relispartition); - ancestor = RelationIdGetRelation(relentry->publish_as_relid); - targetrel = ancestor; - /* Convert tuples if needed. */ - if (relentry->attrmap) - { - TupleDesc tupdesc = RelationGetDescr(targetrel); - - if (old_slot) - old_slot = execute_attr_map_slot(relentry->attrmap, - old_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); - - new_slot = execute_attr_map_slot(relentry->attrmap, - new_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); - } - } - - /* Check row filter */ - if (!pgoutput_row_filter(targetrel, old_slot, &new_slot, - relentry, &action)) - break; - - /* Send BEGIN if we haven't yet */ - if (txndata && !txndata->sent_begin_txn) - pgoutput_send_begin(ctx, txn); - - maybe_send_schema(ctx, change, relation, relentry); - - OutputPluginPrepareWrite(ctx, true); - - /* - * Updates could be transformed to inserts or deletes based on the - * results of the row filter for old and new tuple. - */ - switch (action) - { - case REORDER_BUFFER_CHANGE_INSERT: - logicalrep_write_insert(ctx->out, xid, targetrel, - new_slot, data->binary, - relentry->columns); - break; - case REORDER_BUFFER_CHANGE_UPDATE: - logicalrep_write_update(ctx->out, xid, targetrel, - old_slot, new_slot, data->binary, - relentry->columns); - break; - case REORDER_BUFFER_CHANGE_DELETE: - logicalrep_write_delete(ctx->out, xid, targetrel, - old_slot, data->binary, - relentry->columns); - break; - default: - Assert(false); - } - - OutputPluginWrite(ctx, true); + logicalrep_write_update(ctx->out, xid, targetrel, old_slot, + new_slot, data->binary, relentry->columns); break; case REORDER_BUFFER_CHANGE_DELETE: if (change->data.tp.oldtuple) - { - old_slot = relentry->old_slot; - - ExecStoreHeapTuple(&change->data.tp.oldtuple->tuple, - old_slot, false); - - /* Switch relation if publishing via root. */ - if (relentry->publish_as_relid != RelationGetRelid(relation)) - { - Assert(relation->rd_rel->relispartition); - ancestor = RelationIdGetRelation(relentry->publish_as_relid); - targetrel = ancestor; - /* Convert tuple if needed. */ - if (relentry->attrmap) - { - TupleDesc tupdesc = RelationGetDescr(targetrel); - - old_slot = execute_attr_map_slot(relentry->attrmap, - old_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); - } - } - - /* Check row filter */ - if (!pgoutput_row_filter(targetrel, old_slot, &new_slot, - relentry, &action)) - break; - - /* Send BEGIN if we haven't yet */ - if (txndata && !txndata->sent_begin_txn) - pgoutput_send_begin(ctx, txn); - - maybe_send_schema(ctx, change, relation, relentry); - - OutputPluginPrepareWrite(ctx, true); - logicalrep_write_delete(ctx->out, xid, targetrel, - old_slot, data->binary, - relentry->columns); - OutputPluginWrite(ctx, true); - } + logicalrep_write_delete(ctx->out, xid, targetrel, old_slot, + data->binary, relentry->columns); else elog(DEBUG1, "didn't send DELETE change because of missing oldtuple"); break; @@ -1622,6 +1517,9 @@ pgoutput_change(LogicalDecodingContext *ctx, ReorderBufferTXN *txn, Assert(false); } + OutputPluginWrite(ctx, true); + +cleanup: if (RelationIsValid(ancestor)) { RelationClose(ancestor); -- 2.30.0.windows.2 ^ permalink raw reply [nested|flat] 130+ messages in thread
* Re: Simplify some codes in pgoutput @ 2023-03-16 04:30 Amit Kapila <[email protected]> parent: [email protected] <[email protected]> 1 sibling, 1 reply; 130+ messages in thread From: Amit Kapila @ 2023-03-16 04:30 UTC (permalink / raw) To: [email protected] <[email protected]>; +Cc: PostgreSQL Hackers <[email protected]> On Wed, Mar 15, 2023 at 2:00 PM [email protected] <[email protected]> wrote: > > I noticed that there are some duplicated codes in pgoutput_change() function > which can be simplified, and here is an attempt to do that. > For REORDER_BUFFER_CHANGE_DELETE, when the old tuple is missing, after this patch, we will still send BEGIN and do OutputPluginWrite, etc. Also, it will try to perform row_filter when none of old_slot or new_slot is set. I don't know for which particular case we have s handling missing old tuples for deletes but that might require changes in your proposed patch. -- With Regards, Amit Kapila. ^ permalink raw reply [nested|flat] 130+ messages in thread
* Re: Simplify some codes in pgoutput @ 2023-03-17 03:49 Peter Smith <[email protected]> parent: [email protected] <[email protected]> 1 sibling, 1 reply; 130+ messages in thread From: Peter Smith @ 2023-03-17 03:49 UTC (permalink / raw) To: [email protected] <[email protected]>; +Cc: PostgreSQL Hackers <[email protected]> On Wed, Mar 15, 2023 at 7:30 PM [email protected] <[email protected]> wrote: > > Hi, > > I noticed that there are some duplicated codes in pgoutput_change() function > which can be simplified, and here is an attempt to do that. > > Best Regards, > Hou Zhijie Hi Hou-san. I had a quick look at the 0001 patch. Here are some first comments. ====== 1. + if (relentry->attrmap) + old_slot = execute_attr_map_slot(relentry->attrmap, old_slot, + MakeTupleTableSlot(RelationGetDescr(targetrel), + &TTSOpsVirtual)); 1a. IMO maybe it was more readable before when there was a separate 'tupdesc' variable, instead of trying to squeeze too much into one statement. 1b. Should you retain the old comments that said "/* Convert tuple if needed. */" ~~~ 2. - if (old_slot) - old_slot = execute_attr_map_slot(relentry->attrmap, - old_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); The original code for REORDER_BUFFER_CHANGE_UPDATE was checking "if (old_slot)" but that check seems no longer present. Is it OK? ~~~ 3. - /* - * Send BEGIN if we haven't yet. - * - * We send the BEGIN message after ensuring that we will actually - * send the change. This avoids sending a pair of BEGIN/COMMIT - * messages for empty transactions. - */ That original longer comment has been replaced with just "/* Send BEGIN if we haven't yet */". Won't it be better to retain the more informative longer comment? ~~~ 4. + +cleanup: if (RelationIsValid(ancestor)) { RelationClose(ancestor); ~ Since you've introduced a new label 'cleanup:' then IMO you can remove that old comment "/* Cleanup */". ------ Kind Regards, Peter Smith. Fujitsu Australia ^ permalink raw reply [nested|flat] 130+ messages in thread
* RE: Simplify some codes in pgoutput @ 2023-03-20 09:19 [email protected] <[email protected]> parent: Amit Kapila <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: [email protected] @ 2023-03-20 09:19 UTC (permalink / raw) To: Amit Kapila <[email protected]>; +Cc: PostgreSQL Hackers <[email protected]> On Thursday, March 16, 2023 12:30 PM Amit Kapila <[email protected]> wrote: > > On Wed, Mar 15, 2023 at 2:00 PM [email protected] > <[email protected]> wrote: > > > > I noticed that there are some duplicated codes in pgoutput_change() > function > > which can be simplified, and here is an attempt to do that. > > > > For REORDER_BUFFER_CHANGE_DELETE, when the old tuple is missing, after > this patch, we will still send BEGIN and do OutputPluginWrite, etc. > Also, it will try to perform row_filter when none of old_slot or > new_slot is set. I don't know for which particular case we have s > handling missing old tuples for deletes but that might require changes > in your proposed patch. I researched this a bit. I think the old tuple will be null only if the modified table doesn't have PK or RI when the DELETE happens (referred to the heap_delete()), but in that case the DELETE won't be allowed to be replicated(e.g. the DELETE will either error out or be filtered by table level filter in pgoutput_change). I also checked this for system table and in that case it is null but reorderbuffer doesn't forward it. For user_catalog_table, similarily, the DELETE should be filtered by table filter in pgoutput_change as well. So, I think we can remove this check and log. And here is the new version patch which removes that for now. Best Regards, Hou zj Attachments: [application/octet-stream] v2-0001-simplify-the-code-in-pgoutput_change.patch (8.3K, ../../OS0PR01MB571646FF054E3A2E6AFFFB1894809@OS0PR01MB5716.jpnprd01.prod.outlook.com/2-v2-0001-simplify-the-code-in-pgoutput_change.patch) download | inline diff: From 3810ff2dbd58eb812b95eb6c801fa23a010e82bc Mon Sep 17 00:00:00 2001 From: Hou Zhijie <[email protected]> Date: Wed, 15 Mar 2023 15:57:13 +0800 Subject: [PATCH v2] simplify the code in pgoutput_change --- src/backend/replication/pgoutput/pgoutput.c | 224 ++++++-------------- 1 file changed, 68 insertions(+), 156 deletions(-) diff --git a/src/backend/replication/pgoutput/pgoutput.c b/src/backend/replication/pgoutput/pgoutput.c index 3a2d2e357e..baccca30e8 100644 --- a/src/backend/replication/pgoutput/pgoutput.c +++ b/src/backend/replication/pgoutput/pgoutput.c @@ -1448,187 +1448,99 @@ pgoutput_change(LogicalDecodingContext *ctx, ReorderBufferTXN *txn, /* Avoid leaking memory by using and resetting our own context */ old = MemoryContextSwitchTo(data->context); - /* Send the data */ - switch (action) + /* Switch relation if publishing via root. */ + if (relentry->publish_as_relid != RelationGetRelid(relation)) { - case REORDER_BUFFER_CHANGE_INSERT: - new_slot = relentry->new_slot; - ExecStoreHeapTuple(&change->data.tp.newtuple->tuple, - new_slot, false); - - /* Switch relation if publishing via root. */ - if (relentry->publish_as_relid != RelationGetRelid(relation)) - { - Assert(relation->rd_rel->relispartition); - ancestor = RelationIdGetRelation(relentry->publish_as_relid); - targetrel = ancestor; - /* Convert tuple if needed. */ - if (relentry->attrmap) - { - TupleDesc tupdesc = RelationGetDescr(targetrel); - - new_slot = execute_attr_map_slot(relentry->attrmap, - new_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); - } - } - - /* Check row filter */ - if (!pgoutput_row_filter(targetrel, NULL, &new_slot, relentry, - &action)) - break; - - /* - * Send BEGIN if we haven't yet. - * - * We send the BEGIN message after ensuring that we will actually - * send the change. This avoids sending a pair of BEGIN/COMMIT - * messages for empty transactions. - */ - if (txndata && !txndata->sent_begin_txn) - pgoutput_send_begin(ctx, txn); - - /* - * Schema should be sent using the original relation because it - * also sends the ancestor's relation. - */ - maybe_send_schema(ctx, change, relation, relentry); + Assert(relation->rd_rel->relispartition); + ancestor = RelationIdGetRelation(relentry->publish_as_relid); + targetrel = ancestor; + } - OutputPluginPrepareWrite(ctx, true); - logicalrep_write_insert(ctx->out, xid, targetrel, new_slot, - data->binary, relentry->columns); - OutputPluginWrite(ctx, true); - break; - case REORDER_BUFFER_CHANGE_UPDATE: - if (change->data.tp.oldtuple) - { - old_slot = relentry->old_slot; - ExecStoreHeapTuple(&change->data.tp.oldtuple->tuple, - old_slot, false); - } + if (change->data.tp.newtuple) + { + new_slot = relentry->new_slot; + ExecStoreHeapTuple(&change->data.tp.newtuple->tuple, new_slot, false); - new_slot = relentry->new_slot; - ExecStoreHeapTuple(&change->data.tp.newtuple->tuple, - new_slot, false); + /* Convert tuple if needed. */ + if (relentry->attrmap) + { + TupleTableSlot *slot = MakeTupleTableSlot(RelationGetDescr(targetrel), + &TTSOpsVirtual); - /* Switch relation if publishing via root. */ - if (relentry->publish_as_relid != RelationGetRelid(relation)) - { - Assert(relation->rd_rel->relispartition); - ancestor = RelationIdGetRelation(relentry->publish_as_relid); - targetrel = ancestor; - /* Convert tuples if needed. */ - if (relentry->attrmap) - { - TupleDesc tupdesc = RelationGetDescr(targetrel); + new_slot = execute_attr_map_slot(relentry->attrmap, new_slot, slot); + } + } - if (old_slot) - old_slot = execute_attr_map_slot(relentry->attrmap, - old_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); + if (change->data.tp.oldtuple) + { + old_slot = relentry->old_slot; + ExecStoreHeapTuple(&change->data.tp.oldtuple->tuple, old_slot, false); - new_slot = execute_attr_map_slot(relentry->attrmap, - new_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); - } - } + /* Convert tuple if needed. */ + if (relentry->attrmap) + { + TupleTableSlot *slot = MakeTupleTableSlot(RelationGetDescr(targetrel), + &TTSOpsVirtual); - /* Check row filter */ - if (!pgoutput_row_filter(targetrel, old_slot, &new_slot, - relentry, &action)) - break; + old_slot = execute_attr_map_slot(relentry->attrmap, old_slot, slot); + } + } - /* Send BEGIN if we haven't yet */ - if (txndata && !txndata->sent_begin_txn) - pgoutput_send_begin(ctx, txn); + /* + * Check row filter. + * + * Updates could be transformed to inserts or deletes based on the results + * of the row filter for old and new tuple. + */ + if (!pgoutput_row_filter(targetrel, old_slot, &new_slot, relentry, &action)) + goto cleanup; - maybe_send_schema(ctx, change, relation, relentry); + /* + * Send BEGIN if we haven't yet. + * + * We send the BEGIN message after ensuring that we will actually send the + * change. This avoids sending a pair of BEGIN/COMMIT messages for empty + * transactions. + */ + if (txndata && !txndata->sent_begin_txn) + pgoutput_send_begin(ctx, txn); - OutputPluginPrepareWrite(ctx, true); + /* + * Schema should be sent using the original relation because it also sends + * the ancestor's relation. + */ + maybe_send_schema(ctx, change, relation, relentry); - /* - * Updates could be transformed to inserts or deletes based on the - * results of the row filter for old and new tuple. - */ - switch (action) - { - case REORDER_BUFFER_CHANGE_INSERT: - logicalrep_write_insert(ctx->out, xid, targetrel, - new_slot, data->binary, - relentry->columns); - break; - case REORDER_BUFFER_CHANGE_UPDATE: - logicalrep_write_update(ctx->out, xid, targetrel, - old_slot, new_slot, data->binary, - relentry->columns); - break; - case REORDER_BUFFER_CHANGE_DELETE: - logicalrep_write_delete(ctx->out, xid, targetrel, - old_slot, data->binary, - relentry->columns); - break; - default: - Assert(false); - } + OutputPluginPrepareWrite(ctx, true); - OutputPluginWrite(ctx, true); + /* Send the data */ + switch (action) + { + case REORDER_BUFFER_CHANGE_INSERT: + logicalrep_write_insert(ctx->out, xid, targetrel, new_slot, + data->binary, relentry->columns); + break; + case REORDER_BUFFER_CHANGE_UPDATE: + logicalrep_write_update(ctx->out, xid, targetrel, old_slot, + new_slot, data->binary, relentry->columns); break; case REORDER_BUFFER_CHANGE_DELETE: - if (change->data.tp.oldtuple) - { - old_slot = relentry->old_slot; - - ExecStoreHeapTuple(&change->data.tp.oldtuple->tuple, - old_slot, false); - - /* Switch relation if publishing via root. */ - if (relentry->publish_as_relid != RelationGetRelid(relation)) - { - Assert(relation->rd_rel->relispartition); - ancestor = RelationIdGetRelation(relentry->publish_as_relid); - targetrel = ancestor; - /* Convert tuple if needed. */ - if (relentry->attrmap) - { - TupleDesc tupdesc = RelationGetDescr(targetrel); - - old_slot = execute_attr_map_slot(relentry->attrmap, - old_slot, - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); - } - } - - /* Check row filter */ - if (!pgoutput_row_filter(targetrel, old_slot, &new_slot, - relentry, &action)) - break; - - /* Send BEGIN if we haven't yet */ - if (txndata && !txndata->sent_begin_txn) - pgoutput_send_begin(ctx, txn); - - maybe_send_schema(ctx, change, relation, relentry); - - OutputPluginPrepareWrite(ctx, true); - logicalrep_write_delete(ctx->out, xid, targetrel, - old_slot, data->binary, - relentry->columns); - OutputPluginWrite(ctx, true); - } - else - elog(DEBUG1, "didn't send DELETE change because of missing oldtuple"); + logicalrep_write_delete(ctx->out, xid, targetrel, old_slot, + data->binary, relentry->columns); break; default: Assert(false); } + OutputPluginWrite(ctx, true); + +cleanup: if (RelationIsValid(ancestor)) { RelationClose(ancestor); ancestor = NULL; } - /* Cleanup */ MemoryContextSwitchTo(old); MemoryContextReset(data->context); } -- 2.30.0.windows.2 ^ permalink raw reply [nested|flat] 130+ messages in thread
* RE: Simplify some codes in pgoutput @ 2023-03-20 09:20 [email protected] <[email protected]> parent: Peter Smith <[email protected]> 0 siblings, 0 replies; 130+ messages in thread From: [email protected] @ 2023-03-20 09:20 UTC (permalink / raw) To: Peter Smith <[email protected]>; +Cc: PostgreSQL Hackers <[email protected]> On Friday, March 17, 2023 11:49 AM Peter Smith <[email protected]> wrote: > > On Wed, Mar 15, 2023 at 7:30 PM [email protected] > <[email protected]> wrote: > > > > Hi, > > > > I noticed that there are some duplicated codes in pgoutput_change() > > function which can be simplified, and here is an attempt to do that. > > Hi Hou-san. > > I had a quick look at the 0001 patch. > > Here are some first comments. Thanks for the comments. > > ====== > > 1. > + if (relentry->attrmap) > + old_slot = execute_attr_map_slot(relentry->attrmap, old_slot, > + MakeTupleTableSlot(RelationGetDescr(targetrel), > + &TTSOpsVirtual)); > > 1a. > IMO maybe it was more readable before when there was a separate 'tupdesc' > variable, instead of trying to squeeze too much into one statement. > > 1b. > Should you retain the old comments that said "/* Convert tuple if needed. */" Added. > ~~~ > > 2. > - if (old_slot) > - old_slot = execute_attr_map_slot(relentry->attrmap, > - old_slot, > - MakeTupleTableSlot(tupdesc, &TTSOpsVirtual)); > > The original code for REORDER_BUFFER_CHANGE_UPDATE was checking "if > (old_slot)" but that check seems no longer present. Is it OK? I think the logic is the same. > > ~~~ > > 3. > - /* > - * Send BEGIN if we haven't yet. > - * > - * We send the BEGIN message after ensuring that we will actually > - * send the change. This avoids sending a pair of BEGIN/COMMIT > - * messages for empty transactions. > - */ > > That original longer comment has been replaced with just "/* Send BEGIN if we > haven't yet */". Won't it be better to retain the more informative longer > comment? Added. > ~~~ > > 4. > + > +cleanup: > if (RelationIsValid(ancestor)) > { > RelationClose(ancestor); > > ~ > > Since you've introduced a new label 'cleanup:' then IMO you can remove that > old comment "/* Cleanup */". > Removed. Best Regards, Hou zj ^ permalink raw reply [nested|flat] 130+ messages in thread
end of thread, other threads:[~2023-03-20 09:20 UTC | newest] Thread overview: 130+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/12] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/12] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH v7 5/9] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: LZ4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 05/10] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-03-12 20:32 [PATCH 5/8] (re)add wal_compression_method=lz4 Justin Pryzby <[email protected]> 2021-05-25 04:32 [PATCH v8 5/9] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2021-05-25 04:32 [PATCH v9 5/9] (re)add wal_compression_method: lz4 Justin Pryzby <[email protected]> 2023-03-15 08:29 Simplify some codes in pgoutput [email protected] <[email protected]> 2023-03-16 04:30 ` Re: Simplify some codes in pgoutput Amit Kapila <[email protected]> 2023-03-20 09:19 ` RE: Simplify some codes in pgoutput [email protected] <[email protected]> 2023-03-17 03:49 ` Re: Simplify some codes in pgoutput Peter Smith <[email protected]> 2023-03-20 09:20 ` RE: Simplify some codes in pgoutput [email protected] <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox