agora inbox for [email protected]help / color / mirror / Atom feed
pg_serial early wraparound 277+ messages / 5 participants [nested] [flat]
* pg_serial early wraparound @ 2016-11-08 22:07 Thomas Munro <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Thomas Munro @ 2016-11-08 22:07 UTC (permalink / raw) To: pgsql-hackers Hi hackers, The SLRU managed by predicate.c can wrap around and overwrite data if you have more than 1 billion active XIDs. That's because when SSI was implemented, slru.c was limited to four digit segment names, which implied a page limit that wasn't enough for pg_serial to have space for every possible XID. We should probably rip that code out, because SLRUs now support five digit segment names. Something like the attached. I'll post a test script to demonstrate correct wraparound behaviour around in time for one of the later CFs. -- Thomas Munro http://www.enterprisedb.com -- Sent via pgsql-hackers mailing list ([email protected]) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers Attachments: [application/octet-stream] ssi-slru-wraparound-v1.patch (3.6K, ../../CAEepm=3XfsTSxgEbEOmxu0QDiXy0o18NUg2nC89JZcCGE+XFPA@mail.gmail.com/2-ssi-slru-wraparound-v1.patch) download | inline diff: diff --git a/src/backend/storage/lmgr/predicate.c b/src/backend/storage/lmgr/predicate.c index 24ed21b..6c3df2d 100644 --- a/src/backend/storage/lmgr/predicate.c +++ b/src/backend/storage/lmgr/predicate.c @@ -316,11 +316,9 @@ static SlruCtlData OldSerXidSlruCtlData; #define OLDSERXID_ENTRIESPERPAGE (OLDSERXID_PAGESIZE / OLDSERXID_ENTRYSIZE) /* - * Set maximum pages based on the lesser of the number needed to track all - * transactions and the maximum that SLRU supports. + * Set maximum pages based on the number needed to track all transactions. */ -#define OLDSERXID_MAX_PAGE Min(SLRU_PAGES_PER_SEGMENT * 0x10000 - 1, \ - (MaxTransactionId) / OLDSERXID_ENTRIESPERPAGE) +#define OLDSERXID_MAX_PAGE ((MaxTransactionId) / OLDSERXID_ENTRIESPERPAGE) #define OldSerXidNextPage(page) (((page) >= OLDSERXID_MAX_PAGE) ? 0 : (page) + 1) @@ -328,7 +326,7 @@ static SlruCtlData OldSerXidSlruCtlData; (OldSerXidSlruCtl->shared->page_buffer[slotno] + \ ((((uint32) (xid)) % OLDSERXID_ENTRIESPERPAGE) * OLDSERXID_ENTRYSIZE)))) -#define OldSerXidPage(xid) ((((uint32) (xid)) / OLDSERXID_ENTRIESPERPAGE) % (OLDSERXID_MAX_PAGE + 1)) +#define OldSerXidPage(xid) (((uint32) (xid)) / OLDSERXID_ENTRIESPERPAGE) #define OldSerXidSegment(page) ((page) / SLRU_PAGES_PER_SEGMENT) typedef struct OldSerXidControlData @@ -336,7 +334,6 @@ typedef struct OldSerXidControlData int headPage; /* newest initialized page */ TransactionId headXid; /* newest valid Xid in the SLRU */ TransactionId tailXid; /* oldest xmin we might be interested in */ - bool warningIssued; /* have we issued SLRU wrap-around warning? */ } OldSerXidControlData; typedef struct OldSerXidControlData *OldSerXidControl; @@ -815,7 +812,6 @@ OldSerXidInit(void) oldSerXidControl->headPage = -1; oldSerXidControl->headXid = InvalidTransactionId; oldSerXidControl->tailXid = InvalidTransactionId; - oldSerXidControl->warningIssued = false; } } @@ -871,47 +867,6 @@ OldSerXidAdd(TransactionId xid, SerCommitSeqNo minConflictCommitSeqNo) if (isNewPage) oldSerXidControl->headPage = targetPage; - /* - * Give a warning if we're about to run out of SLRU pages. - * - * slru.c has a maximum of 64k segments, with 32 (SLRU_PAGES_PER_SEGMENT) - * pages each. We need to store a 64-bit integer for each Xid, and with - * default 8k block size, 65536*32 pages is only enough to cover 2^30 - * XIDs. If we're about to hit that limit and wrap around, warn the user. - * - * To avoid spamming the user, we only give one warning when we've used 1 - * billion XIDs, and stay silent until the situation is fixed and the - * number of XIDs used falls below 800 million again. - * - * XXX: We have no safeguard to actually *prevent* the wrap-around, - * though. All you get is a warning. - */ - if (oldSerXidControl->warningIssued) - { - TransactionId lowWatermark; - - lowWatermark = tailXid + 800000000; - if (lowWatermark < FirstNormalTransactionId) - lowWatermark = FirstNormalTransactionId; - if (TransactionIdPrecedes(xid, lowWatermark)) - oldSerXidControl->warningIssued = false; - } - else - { - TransactionId highWatermark; - - highWatermark = tailXid + 1000000000; - if (highWatermark < FirstNormalTransactionId) - highWatermark = FirstNormalTransactionId; - if (TransactionIdFollows(xid, highWatermark)) - { - oldSerXidControl->warningIssued = true; - ereport(WARNING, - (errmsg("memory for serializable conflict tracking is nearly exhausted"), - errhint("There might be an idle transaction or a forgotten prepared transaction causing this."))); - } - } - if (isNewPage) { /* Initialize intervening pages. */ ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 4dd29c7b10..470431010d 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------45196B023835614BDFCBD16D Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20201220.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20201220.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 4dd29c7b10..470431010d 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------90362739C57C6315B5637FAD Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20201107.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20201107.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 4dd29c7b10..470431010d 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------291E0481B4400C0ECC8E497A Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20201108.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20201108.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210122.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210122.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0002-Move-IS-NOT-NULL-handling-from-BRIN-support-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/9] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..c7f7175a2a 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210215.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210215.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/8] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210112.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 14da9ed17f..3735c41788 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -398,11 +401,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -438,9 +480,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -451,17 +493,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114-2.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114-2.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2020-09-13 10:12 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2020-09-13 10:12 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 62 +++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 55851376d8..8d23f2864b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -372,6 +372,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -397,11 +400,50 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * Make room for per-attribute lists of scan keys that we'll pass to the * consistent support procedure. We keep null and regular keys separate, * so that we can easily pass regular keys to the consistent function. + * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly + * the same lifetime, so that's OK. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + /* regular keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + /* NULL keys */ + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -437,9 +479,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -450,17 +492,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210114.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210114.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210308b.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210308b.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ce0f525c21..758c47f0f4 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210311.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210311.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/6] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0004-BRIN-bloom-indexes-20210303.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0004-BRIN-bloom-indexes-20210303.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 5/8] Optimize allocations in bringetbitmap @ 2021-03-02 18:57 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-02 18:57 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 9f2656b8d9..1f82e965f9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -402,15 +405,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -444,9 +484,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -457,17 +497,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0006-BRIN-bloom-indexes-20210305.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0006-BRIN-bloom-indexes-20210305.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-21 23:24 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-21 23:24 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index efda84aba3..0bf25fd05b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -403,15 +406,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest index can have 32 attributes, so the amount of wasted * memory is negligible. We could invent a more compact approach (with * just space for used attributes) but that would make the matching more * complex so it's not a good trade-off. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* Preprocess the scan keys - split them into per-attribute arrays. */ for (keyno = 0; keyno < scan->numberOfKeys; keyno++) @@ -443,9 +483,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -456,17 +496,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.30.2 --------------76348C5C2C314FA585652FE5 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210322.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210322.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 4/8] Optimize allocations in bringetbitmap @ 2021-03-21 23:24 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Tomas Vondra @ 2021-03-21 23:24 UTC (permalink / raw) The bringetbitmap function allocates memory for various purposes, which may be quite expensive, depending on the number of scan keys. Instead of allocating them separately, allocate one bit chunk of memory an carve it into smaller pieces as needed - all the pieces have the same lifespan, and it saves quite a bit of CPU and memory overhead. Author: Tomas Vondra <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index efda84aba3..0bf25fd05b 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -373,6 +373,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) int *nkeys, *nnullkeys; int keyno; + char *ptr; + Size len; + char *tmp PG_USED_FOR_ASSERTS_ONLY; opaque = (BrinOpaque *) scan->opaque; bdesc = opaque->bo_bdesc; @@ -403,15 +406,52 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * We keep null and regular keys separate, so that we can pass just the * regular keys to the consistent function easily. * + * To reduce the allocation overhead, we allocate one big chunk and then + * carve it into smaller arrays ourselves. All the pieces have exactly the + * same lifetime, so that's OK. + * * XXX The widest index can have 32 attributes, so the amount of wasted * memory is negligible. We could invent a more compact approach (with * just space for used attributes) but that would make the matching more * complex so it's not a good trade-off. */ - keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); - nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); - nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + len = + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* regular keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts) + + MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts) + /* NULL keys */ + MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys) * bdesc->bd_tupdesc->natts + + MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + ptr = palloc(len); + tmp = ptr; + + keys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nullkeys = (ScanKey **) ptr; + ptr += MAXALIGN(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + + nkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + nnullkeys = (int *) ptr; + ptr += MAXALIGN(sizeof(int) * bdesc->bd_tupdesc->natts); + + for (int i = 0; i < bdesc->bd_tupdesc->natts; i++) + { + keys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[i] = (ScanKey *) ptr; + ptr += MAXALIGN(sizeof(ScanKey) * scan->numberOfKeys); + } + + Assert(tmp + len == ptr); + + /* zero the number of keys */ + memset(nkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); + memset(nnullkeys, 0, sizeof(int) * bdesc->bd_tupdesc->natts); /* Preprocess the scan keys - split them into per-attribute arrays. */ for (keyno = 0; keyno < scan->numberOfKeys; keyno++) @@ -443,9 +483,9 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) { FmgrInfo *tmp; - /* No key/null arrays for this attribute. */ - Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); - Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); + /* First time we see this attribute, so no key/null keys. */ + Assert(nkeys[keyattno - 1] == 0); + Assert(nnullkeys[keyattno - 1] == 0); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -456,17 +496,11 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* Add key to the proper per-attribute array. */ if (key->sk_flags & SK_ISNULL) { - if (!nullkeys[keyattno - 1]) - nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; nnullkeys[keyattno - 1]++; } else { - if (!keys[keyattno - 1]) - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - keys[keyattno - 1][nkeys[keyattno - 1]] = key; nkeys[keyattno - 1]++; } -- 2.30.2 --------------76348C5C2C314FA585652FE5 Content-Type: text/x-patch; charset=UTF-8; name="0005-BRIN-bloom-indexes-20210322.patch" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="0005-BRIN-bloom-indexes-20210322.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* Re: Can we delete the vacuumdb.sgml notes about which version each option was added in? @ 2023-04-16 13:01 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Nathan Bossart @ 2023-04-16 13:01 UTC (permalink / raw) To: David Rowley <[email protected]>; +Cc: PostgreSQL Developers <[email protected]> On Sun, Apr 16, 2023 at 10:14:35PM +1200, David Rowley wrote: > There are 3 notes there that read "This option is only available for > servers running PostgreSQL 9.6 and later.". Since 9.6 is a few years > out of support, can we get rid of these 3? +1 > Or better yet, can we just delete them all? Is it really worth doing > this in case someone is using a new vacuumdb on an older server? > > I just tried compiling the HTML with all the notes removed, I see from > looking at a print preview that it's now ~1 full A4 page shorter than > it was previously. 5 pages down to 4. > > Does anyone think we should keep these? I'm +0.5 for removing all of them. While they are still relevant and could potentially help users, these notes are taking up a rather big portion of the vacuumdb page, and it should print a nice error message if you try to use an option on and older server, anyway. -- Nathan Bossart Amazon Web Services: https://aws.amazon.com ^ permalink raw reply [nested|flat] 277+ messages in thread
end of thread, other threads:[~2023-04-16 13:01 UTC | newest] Thread overview: 277+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2016-11-08 22:07 pg_serial early wraparound Thomas Munro <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/9] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2020-09-13 10:12 [PATCH 3/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 5/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-02 18:57 [PATCH 3/6] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-21 23:24 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2021-03-21 23:24 [PATCH 4/8] Optimize allocations in bringetbitmap Tomas Vondra <[email protected]> 2023-04-16 13:01 Re: Can we delete the vacuumdb.sgml notes about which version each option was added in? Nathan Bossart <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox