public inbox for [email protected]help / color / mirror / Atom feed
[PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions 281+ messages / 4 participants [nested] [flat]
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-12 13:07 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-12 13:07 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit, and it simplifies the support procedures quite a bit, as they don't need to care about NULL values and flags at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 294 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 240 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..f438e59c75 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -359,6 +337,7 @@ brinbeginscan(Relation r, int nkeys, int norderbys) return scan; } + /* * Execute the index scan. * @@ -389,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 853727190c..f5eaef416f 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -574,37 +506,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index a3bb3558ec..a625ef7aac 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.25.4 --7kiiugxvbzvpnhzt Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="0003-optimize-allocations-20200913.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/5] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-12 13:07 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-12 13:07 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit, and it simplifies the support procedures quite a bit, as they don't need to care about NULL values and flags at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 287 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +-------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 235 insertions(+), 264 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..83c71d0f8e 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -359,6 +337,7 @@ brinbeginscan(Relation r, int nkeys, int norderbys) return scan; } + /* * Execute the index scan. * @@ -389,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -552,6 +551,45 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +732,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +760,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1540,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1626,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 853727190c..f5eaef416f 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -574,37 +506,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index a3bb3558ec..a625ef7aac 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.25.4 --c7tltgiw2u7hovas Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="0003-BRIN-bloom-indexes-20200912.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit, and it simplifies the support procedures quite a bit, as they don't need to care about NULL values and flags at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 294 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 240 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..f438e59c75 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -359,6 +337,7 @@ brinbeginscan(Relation r, int nkeys, int norderbys) return scan; } + /* * Execute the index scan. * @@ -389,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 853727190c..f5eaef416f 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -574,37 +506,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index b233558310..8886ad984e 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.25.4 --oygwhy5yjes6547y Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="0003-optimize-allocations-20200917.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..4dd29c7b10 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 853727190c..f5eaef416f 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -574,37 +506,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index b233558310..8886ad984e 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------90362739C57C6315B5637FAD Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20201107.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20201107.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit, and it simplifies the support procedures quite a bit, as they don't need to care about NULL values and flags at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 294 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 240 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..f438e59c75 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -359,6 +337,7 @@ brinbeginscan(Relation r, int nkeys, int norderbys) return scan; } + /* * Execute the index scan. * @@ -389,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 853727190c..f5eaef416f 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -574,37 +506,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index b233558310..8886ad984e 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.25.4 --5fmiyix6rzr5abmj Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="0003-optimize-allocations-20200917b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/7] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit, and it simplifies the support procedures quite a bit, as they don't need to care about NULL values and flags at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 294 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 240 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..f438e59c75 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -359,6 +337,7 @@ brinbeginscan(Relation r, int nkeys, int norderbys) return scan; } + /* * Execute the index scan. * @@ -389,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 853727190c..f5eaef416f 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -574,37 +506,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index b233558310..8886ad984e 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --zzslo7zt7tqdcawh Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="0003-optimize-allocations-20201103.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..4dd29c7b10 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 853727190c..f5eaef416f 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -574,37 +506,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index b233558310..8886ad984e 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------291E0481B4400C0ECC8E497A Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20201108.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20201108.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------4B194FF8F3EA3786FF9EAE1F Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210203.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D21F32E0F9E7408E9BE1AF2E Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------310A2AE1CC4C2E2E77559E3D Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210114-2.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------22A4B241170149838D4D1F8F Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210215.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index ccf609e799..4dd29c7b10 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index b1b3ce700d..cb4eb438d3 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index b233558310..8886ad984e 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 9ffc9100c0..7c4f3da0a0 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------45196B023835614BDFCBD16D Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20201220.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20201220.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------0E72B707603BED22B4040825 Content-Type: text/x-patch; charset=UTF-8; name="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0001-Pass-all-scan-keys-to-BRIN-consistent-funct-20210211.pa"; filename*1="tch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index dc187153aa..14da9ed17f 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -416,10 +396,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -440,23 +423,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -464,9 +448,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -544,15 +542,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -695,7 +735,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -724,25 +763,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1521,6 +1543,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1574,3 +1629,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------FA974B75A0C3E9CA18CE7207 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210122.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions @ 2020-09-17 15:26 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2020-09-17 15:26 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 106 +------- src/backend/access/brin/brin_minmax.c | 103 +------- src/include/access/brin_internal.h | 3 + 4 files changed, 239 insertions(+), 266 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 8a1a9da78f..55851376d8 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -178,7 +181,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -242,31 +244,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -389,8 +367,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -415,10 +395,13 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) /* * Make room for per-attribute lists of scan keys that we'll pass to the - * consistent support procedure. + * consistent support procedure. We keep null and regular keys separate, + * so that we can easily pass regular keys to the consistent function. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -439,23 +422,24 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno-1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan + * keys are there for a given attribute, so we simply allocate + * the largest number possible (as if all scan keys belonged to + * the same attribute). This may waste a bit of memory, but we + * only expect small number of scan keys in general, so this + * should be negligible, and it's probably cheaper than having + * to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many - * scan keys are there for this attribute, so we simply - * allocate the largest number possible. This may waste - * a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, - * and it's cheaper than having to repalloc repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -463,9 +447,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -543,15 +541,57 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular + * and IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine mismatch + * within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all passed. + * If there are no regular scan keys, we're done - the page + * range matches. If there are regular keys, but the page + * range is marked as 'all nulls' it can't possibly pass + * (we're assuming the operators are strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -694,7 +734,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -723,25 +762,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1520,6 +1542,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1573,3 +1628,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; + * our deformed tuple will get updated if the new tuple doesn't fit + * the original range (note this means we can't break out of the loop + * early). Make a note of whether this happens, so that we know to + * insert the modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's + * the first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to + * have only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index 215bc794d3..f4730be3b9 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -264,63 +254,6 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* It has to be checked, if it contains elements that are not mergeable. */ if (DatumGetBool(column->bv_values[INCLUSION_UNMERGEABLE])) @@ -331,9 +264,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -572,37 +504,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index 12878ff3a0..6c8852d404 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -152,72 +142,14 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool regular_keys = false; - - /* - * First check if there are any IS NULL scan keys, and if we're - * violating them. In that case we can terminate early, without - * inspecting the ranges. - */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* handle IS NULL/IS NOT NULL tests */ - if (key->sk_flags & SK_ISNULL) - { - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - else - /* note we have regular (non-NULL) scan keys */ - regular_keys = true; - } - - /* - * If the page range is all nulls, it cannot possibly be consistent if - * there are some regular scan keys. - */ - if (column->bv_allnulls && regular_keys) - PG_RETURN_BOOL(false); - - /* If there are no regular keys, the page range is considered consistent. */ - if (!regular_keys) - PG_RETURN_BOOL(true); /* Check that the range is consistent with all scan keys. */ for (keyno = 0; keyno < nkeys; keyno++) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the @@ -308,34 +240,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 85c612e490..7b79a52536 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------CF71AF65F7C337C37C24B045 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210112.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 743f2a925a..ce0f525c21 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -550,15 +549,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -665,7 +707,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -694,25 +735,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1491,6 +1515,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1544,3 +1601,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------D524CD37E77B36A2883A7617 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210311.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------AC3FFB734F56C5F52D422EFC Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210305.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 963b7079cf..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any san keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------6A37408A2C42B5B56C3B3D49 Content-Type: text/x-patch; charset=UTF-8; name="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0003-Optimize-allocations-in-bringetbitmap-20210303.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------82D677E9F94AC7574E460205 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-02 18:27 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-02 18:27 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Alvaro Herrera <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index f9a0476024..9f2656b8d9 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -419,13 +399,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * consistent support procedure. We allocate space for all attributes, so * that we don't have to bother determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest table can have ~1600 attributes, so this may allocate a * couple kilobytes of memory). We could invent a more compact approach * (with just space for used attributes) but that would make the matching * more complicated, so it may not be a win. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* * Preprocess the scan keys - split them into per-attribute arrays. @@ -445,23 +430,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this index attribute, so init as needed. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for a given attribute, so we simply allocate the largest + * number possible (as if all scan keys belonged to the same + * attribute). This may waste a bit of memory, but we only expect + * small number of scan keys in general, so this should be negligible, + * and it's probably cheaper than having to repalloc repeatedly. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible. This may waste a bit of memory, but we only - * expect small number of scan keys in general, so this should be - * negligible, and it's cheaper than having to repalloc - * repeatedly. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -469,9 +454,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinValues *bval; Datum add; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -703,7 +745,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -732,25 +773,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1529,6 +1553,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1582,3 +1639,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index a260074c91..b17077703c 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.26.2 --------------556A1DC61262AF15641DB204 Content-Type: text/x-patch; charset=UTF-8; name="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0005-Optimize-allocations-in-bringetbitmap-20210308b.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-21 23:24 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-21 23:24 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Nikita Glukhov <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 33f4e2c15c..efda84aba3 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -420,13 +400,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * keys, so we allocate space for all attributes. That may use more memory * but it's probably cheaper than determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest index can have 32 attributes, so the amount of wasted * memory is negligible. We could invent a more compact approach (with * just space for used attributes) but that would make the matching more * complex so it's not a good trade-off. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* Preprocess the scan keys - split them into per-attribute arrays. */ for (keyno = 0; keyno < scan->numberOfKeys; keyno++) @@ -444,23 +429,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this attribute, so init the array of keys. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for this attribute, so we simply allocate the largest number + * possible (as if all keys were for this attribute). This may waste a + * bit of memory, but we only expect small number of scan keys in + * general, so this should be negligible, and repeated repalloc calls + * are not free either. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible (as if all keys were for this attribute). This - * may waste a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, and - * repeated repalloc calls are not free either. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -468,9 +453,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -663,7 +705,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -692,25 +733,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1489,6 +1513,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1542,3 +1599,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index cf2d029048..d8cfc9d909 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.30.2 --------------76348C5C2C314FA585652FE5 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210322.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210322.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions @ 2021-03-21 23:24 Tomas Vondra <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Tomas Vondra @ 2021-03-21 23:24 UTC (permalink / raw) The handling of IS [NOT] NULL clauses is independent of an opclass, and most of the code was exactly the same in both minmax and inclusion. So instead move the code from support procedures to the AM methods etc. This simplifies the code quite a bit - especially the support procedures quite a bit, as they don't need to care about NULL values and flags at all. It also means the IS [NOT] NULL clauses can be evaluated without invoking the support procedure at all. Author: Tomas Vondra <[email protected]> Author: Nikita Glukhov <[email protected]> Reviewed-by: Nikita Glukhov <[email protected]> Reviewed-by: Mark Dilger <[email protected]> Reviewed-by: Alexander Korotkov <[email protected]> Reviewed-by: Masahiko Sawada <[email protected]> Reviewed-by: John Naylor <[email protected]> Discussion: https://postgr.es/m/[email protected] --- src/backend/access/brin/brin.c | 293 +++++++++++++++++------ src/backend/access/brin/brin_inclusion.c | 96 +------- src/backend/access/brin/brin_minmax.c | 93 +------ src/include/access/brin_internal.h | 3 + 4 files changed, 244 insertions(+), 241 deletions(-) diff --git a/src/backend/access/brin/brin.c b/src/backend/access/brin/brin.c index 33f4e2c15c..efda84aba3 100644 --- a/src/backend/access/brin/brin.c +++ b/src/backend/access/brin/brin.c @@ -35,6 +35,7 @@ #include "storage/freespace.h" #include "utils/acl.h" #include "utils/builtins.h" +#include "utils/datum.h" #include "utils/index_selfuncs.h" #include "utils/memutils.h" #include "utils/rel.h" @@ -77,7 +78,9 @@ static void form_and_insert_tuple(BrinBuildState *state); static void union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b); static void brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy); - +static bool add_values_to_range(Relation idxRel, BrinDesc *bdesc, + BrinMemTuple *dtup, Datum *values, bool *nulls); +static bool check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys); /* * BRIN handler function: return IndexAmRoutine with access method parameters @@ -179,7 +182,6 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, OffsetNumber off; BrinTuple *brtup; BrinMemTuple *dtup; - int keyno; CHECK_FOR_INTERRUPTS(); @@ -243,31 +245,7 @@ brininsert(Relation idxRel, Datum *values, bool *nulls, dtup = brin_deform_tuple(bdesc, brtup, NULL); - /* - * Compare the key values of the new tuple to the stored index values; - * our deformed tuple will get updated if the new tuple doesn't fit - * the original range (note this means we can't break out of the loop - * early). Make a note of whether this happens, so that we know to - * insert the modified tuple later. - */ - for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) - { - Datum result; - BrinValues *bval; - FmgrInfo *addValue; - - bval = &dtup->bt_columns[keyno]; - addValue = index_getprocinfo(idxRel, keyno + 1, - BRIN_PROCNUM_ADDVALUE); - result = FunctionCall4Coll(addValue, - idxRel->rd_indcollation[keyno], - PointerGetDatum(bdesc), - PointerGetDatum(bval), - values[keyno], - nulls[keyno]); - /* if that returned true, we need to insert the updated tuple */ - need_insert |= DatumGetBool(result); - } + need_insert = add_values_to_range(idxRel, bdesc, dtup, values, nulls); if (!need_insert) { @@ -390,8 +368,10 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) BrinMemTuple *dtup; BrinTuple *btup = NULL; Size btupsz = 0; - ScanKey **keys; - int *nkeys; + ScanKey **keys, + **nullkeys; + int *nkeys, + *nnullkeys; int keyno; opaque = (BrinOpaque *) scan->opaque; @@ -420,13 +400,18 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) * keys, so we allocate space for all attributes. That may use more memory * but it's probably cheaper than determining which attributes are used. * + * We keep null and regular keys separate, so that we can pass just the + * regular keys to the consistent function easily. + * * XXX The widest index can have 32 attributes, so the amount of wasted * memory is negligible. We could invent a more compact approach (with * just space for used attributes) but that would make the matching more * complex so it's not a good trade-off. */ keys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); + nullkeys = palloc0(sizeof(ScanKey *) * bdesc->bd_tupdesc->natts); nkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); + nnullkeys = palloc0(sizeof(int) * bdesc->bd_tupdesc->natts); /* Preprocess the scan keys - split them into per-attribute arrays. */ for (keyno = 0; keyno < scan->numberOfKeys; keyno++) @@ -444,23 +429,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) TupleDescAttr(bdesc->bd_tupdesc, keyattno - 1)->attcollation)); - /* First time we see this attribute, so init the array of keys. */ - if (!keys[keyattno - 1]) + /* + * First time we see this index attribute, so init as needed. + * + * This is a bit of an overkill - we don't know how many scan keys are + * there for this attribute, so we simply allocate the largest number + * possible (as if all keys were for this attribute). This may waste a + * bit of memory, but we only expect small number of scan keys in + * general, so this should be negligible, and repeated repalloc calls + * are not free either. + */ + if (consistentFn[keyattno - 1].fn_oid == InvalidOid) { FmgrInfo *tmp; - /* - * This is a bit of an overkill - we don't know how many scan keys - * are there for this attribute, so we simply allocate the largest - * number possible (as if all keys were for this attribute). This - * may waste a bit of memory, but we only expect small number of - * scan keys in general, so this should be negligible, and - * repeated repalloc calls are not free either. - */ - keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); - - /* First time this column, so look up consistent function */ - Assert(consistentFn[keyattno - 1].fn_oid == InvalidOid); + /* No key/null arrays for this attribute. */ + Assert((keys[keyattno - 1] == NULL) && (nkeys[keyattno - 1] == 0)); + Assert((nullkeys[keyattno - 1] == NULL) && (nnullkeys[keyattno - 1] == 0)); tmp = index_getprocinfo(idxRel, keyattno, BRIN_PROCNUM_CONSISTENT); @@ -468,9 +453,23 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) CurrentMemoryContext); } - /* Add key to the per-attribute array. */ - keys[keyattno - 1][nkeys[keyattno - 1]] = key; - nkeys[keyattno - 1]++; + /* Add key to the proper per-attribute array. */ + if (key->sk_flags & SK_ISNULL) + { + if (!nullkeys[keyattno - 1]) + nullkeys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + nullkeys[keyattno - 1][nnullkeys[keyattno - 1]] = key; + nnullkeys[keyattno - 1]++; + } + else + { + if (!keys[keyattno - 1]) + keys[keyattno - 1] = palloc0(sizeof(ScanKey) * scan->numberOfKeys); + + keys[keyattno - 1][nkeys[keyattno - 1]] = key; + nkeys[keyattno - 1]++; + } } /* allocate an initial in-memory tuple, out of the per-range memcxt */ @@ -549,15 +548,58 @@ bringetbitmap(IndexScanDesc scan, TIDBitmap *tbm) Datum add; Oid collation; - /* skip attributes without any scan keys */ - if (nkeys[attno - 1] == 0) + /* + * skip attributes without any scan keys (both regular and + * IS [NOT] NULL) + */ + if (nkeys[attno - 1] == 0 && nnullkeys[attno - 1] == 0) continue; bval = &dtup->bt_columns[attno - 1]; + /* + * First check if there are any IS [NOT] NULL scan keys, + * and if we're violating them. In that case we can + * terminate early, without invoking the support function. + * + * As there may be more keys, we can only detemine + * mismatch within this loop. + */ + if (bdesc->bd_info[attno - 1]->oi_regular_nulls && + !check_null_keys(bval, nullkeys[attno - 1], + nnullkeys[attno - 1])) + { + /* + * If any of the IS [NOT] NULL keys failed, the page + * range as a whole can't pass. So terminate the loop. + */ + addrange = false; + break; + } + + /* + * So either there are no IS [NOT] NULL keys, or all + * passed. If there are no regular scan keys, we're done - + * the page range matches. If there are regular keys, but + * the page range is marked as 'all nulls' it can't + * possibly pass (we're assuming the operators are + * strict). + */ + + /* No regular scan keys - page range as a whole passes. */ + if (!nkeys[attno - 1]) + continue; + Assert((nkeys[attno - 1] > 0) && (nkeys[attno - 1] <= scan->numberOfKeys)); + /* If it is all nulls, it cannot possibly be consistent. */ + if (bval->bv_allnulls) + { + addrange = false; + break; + } + /* * Check whether the scan key is consistent with the page * range values; if so, have the pages in the range added @@ -663,7 +705,6 @@ brinbuildCallback(Relation index, { BrinBuildState *state = (BrinBuildState *) brstate; BlockNumber thisblock; - int i; thisblock = ItemPointerGetBlockNumber(tid); @@ -692,25 +733,8 @@ brinbuildCallback(Relation index, } /* Accumulate the current tuple into the running state */ - for (i = 0; i < state->bs_bdesc->bd_tupdesc->natts; i++) - { - FmgrInfo *addValue; - BrinValues *col; - Form_pg_attribute attr = TupleDescAttr(state->bs_bdesc->bd_tupdesc, i); - - col = &state->bs_dtuple->bt_columns[i]; - addValue = index_getprocinfo(index, i + 1, - BRIN_PROCNUM_ADDVALUE); - - /* - * Update dtuple state, if and as necessary. - */ - FunctionCall4Coll(addValue, - attr->attcollation, - PointerGetDatum(state->bs_bdesc), - PointerGetDatum(col), - values[i], isnull[i]); - } + (void) add_values_to_range(index, state->bs_bdesc, state->bs_dtuple, + values, isnull); } /* @@ -1489,6 +1513,39 @@ union_tuples(BrinDesc *bdesc, BrinMemTuple *a, BrinTuple *b) FmgrInfo *unionFn; BrinValues *col_a = &a->bt_columns[keyno]; BrinValues *col_b = &db->bt_columns[keyno]; + BrinOpcInfo *opcinfo = bdesc->bd_info[keyno]; + + if (opcinfo->oi_regular_nulls) + { + /* Adjust "hasnulls". */ + if (!col_a->bv_hasnulls && col_b->bv_hasnulls) + col_a->bv_hasnulls = true; + + /* If there are no values in B, there's nothing left to do. */ + if (col_b->bv_allnulls) + continue; + + /* + * Adjust "allnulls". If A doesn't have values, just copy the + * values from B into A, and we're done. We cannot run the + * operators in this case, because values in A might contain + * garbage. Note we already established that B contains values. + */ + if (col_a->bv_allnulls) + { + int i; + + col_a->bv_allnulls = false; + + for (i = 0; i < opcinfo->oi_nstored; i++) + col_a->bv_values[i] = + datumCopy(col_b->bv_values[i], + opcinfo->oi_typcache[i]->typbyval, + opcinfo->oi_typcache[i]->typlen); + + continue; + } + } unionFn = index_getprocinfo(bdesc->bd_index, keyno + 1, BRIN_PROCNUM_UNION); @@ -1542,3 +1599,103 @@ brin_vacuum_scan(Relation idxrel, BufferAccessStrategy strategy) */ FreeSpaceMapVacuum(idxrel); } + +static bool +add_values_to_range(Relation idxRel, BrinDesc *bdesc, BrinMemTuple *dtup, + Datum *values, bool *nulls) +{ + int keyno; + bool modified = false; + + /* + * Compare the key values of the new tuple to the stored index values; our + * deformed tuple will get updated if the new tuple doesn't fit the + * original range (note this means we can't break out of the loop early). + * Make a note of whether this happens, so that we know to insert the + * modified tuple later. + */ + for (keyno = 0; keyno < bdesc->bd_tupdesc->natts; keyno++) + { + Datum result; + BrinValues *bval; + FmgrInfo *addValue; + + bval = &dtup->bt_columns[keyno]; + + if (bdesc->bd_info[keyno]->oi_regular_nulls && nulls[keyno]) + { + /* + * If the new value is null, we record that we saw it if it's the + * first one; otherwise, there's nothing to do. + */ + if (!bval->bv_hasnulls) + { + bval->bv_hasnulls = true; + modified = true; + } + + continue; + } + + addValue = index_getprocinfo(idxRel, keyno + 1, + BRIN_PROCNUM_ADDVALUE); + result = FunctionCall4Coll(addValue, + idxRel->rd_indcollation[keyno], + PointerGetDatum(bdesc), + PointerGetDatum(bval), + values[keyno], + nulls[keyno]); + /* if that returned true, we need to insert the updated tuple */ + modified |= DatumGetBool(result); + } + + return modified; +} + +static bool +check_null_keys(BrinValues *bval, ScanKey *nullkeys, int nnullkeys) +{ + int keyno; + + /* + * First check if there are any IS [NOT] NULL scan keys, and if we're + * violating them. + */ + for (keyno = 0; keyno < nnullkeys; keyno++) + { + ScanKey key = nullkeys[keyno]; + + Assert(key->sk_attno == bval->bv_attno); + + /* Handle only IS NULL/IS NOT NULL tests */ + if (!(key->sk_flags & SK_ISNULL)) + continue; + + if (key->sk_flags & SK_SEARCHNULL) + { + /* IS NULL scan key, but range has no NULLs */ + if (!bval->bv_allnulls && !bval->bv_hasnulls) + return false; + } + else if (key->sk_flags & SK_SEARCHNOTNULL) + { + /* + * For IS NOT NULL, we can only skip ranges that are known to have + * only nulls. + */ + if (bval->bv_allnulls) + return false; + } + else + { + /* + * Neither IS NULL nor IS NOT NULL was used; assume all indexable + * operators are strict and thus return false with NULL value in + * the scan key. + */ + return false; + } + } + + return true; +} diff --git a/src/backend/access/brin/brin_inclusion.c b/src/backend/access/brin/brin_inclusion.c index cf2d029048..d8cfc9d909 100644 --- a/src/backend/access/brin/brin_inclusion.c +++ b/src/backend/access/brin/brin_inclusion.c @@ -110,6 +110,7 @@ brin_inclusion_opcinfo(PG_FUNCTION_ARGS) */ result = palloc0(MAXALIGN(SizeofBrinOpcInfo(3)) + sizeof(InclusionOpaque)); result->oi_nstored = 3; + result->oi_regular_nulls = true; result->oi_opaque = (InclusionOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(3)); @@ -141,7 +142,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_BOOL(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_BOOL(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *finfo; Datum result; @@ -149,18 +150,7 @@ brin_inclusion_add_value(PG_FUNCTION_ARGS) AttrNumber attno; Form_pg_attribute attr; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -268,52 +258,9 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* Handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -331,9 +278,8 @@ brin_inclusion_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* Skip IS NULL/IS NOT NULL keys (already handled above). */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -574,37 +520,11 @@ brin_inclusion_union(PG_FUNCTION_ARGS) Datum result; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls". */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do. */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[INCLUSION_UNION] = - datumCopy(col_b->bv_values[INCLUSION_UNION], - attr->attbyval, attr->attlen); - col_a->bv_values[INCLUSION_UNMERGEABLE] = - col_b->bv_values[INCLUSION_UNMERGEABLE]; - col_a->bv_values[INCLUSION_CONTAINS_EMPTY] = - col_b->bv_values[INCLUSION_CONTAINS_EMPTY]; - PG_RETURN_VOID(); - } - /* If B includes empty elements, mark A similarly, if needed. */ if (!DatumGetBool(col_a->bv_values[INCLUSION_CONTAINS_EMPTY]) && DatumGetBool(col_b->bv_values[INCLUSION_CONTAINS_EMPTY])) diff --git a/src/backend/access/brin/brin_minmax.c b/src/backend/access/brin/brin_minmax.c index e116084a02..330bed0487 100644 --- a/src/backend/access/brin/brin_minmax.c +++ b/src/backend/access/brin/brin_minmax.c @@ -48,6 +48,7 @@ brin_minmax_opcinfo(PG_FUNCTION_ARGS) result = palloc0(MAXALIGN(SizeofBrinOpcInfo(2)) + sizeof(MinmaxOpaque)); result->oi_nstored = 2; + result->oi_regular_nulls = true; result->oi_opaque = (MinmaxOpaque *) MAXALIGN((char *) result + SizeofBrinOpcInfo(2)); result->oi_typcache[0] = result->oi_typcache[1] = @@ -69,7 +70,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) BrinDesc *bdesc = (BrinDesc *) PG_GETARG_POINTER(0); BrinValues *column = (BrinValues *) PG_GETARG_POINTER(1); Datum newval = PG_GETARG_DATUM(2); - bool isnull = PG_GETARG_DATUM(3); + bool isnull PG_USED_FOR_ASSERTS_ONLY = PG_GETARG_DATUM(3); Oid colloid = PG_GET_COLLATION(); FmgrInfo *cmpFn; Datum compar; @@ -77,18 +78,7 @@ brin_minmax_add_value(PG_FUNCTION_ARGS) Form_pg_attribute attr; AttrNumber attno; - /* - * If the new value is null, we record that we saw it if it's the first - * one; otherwise, there's nothing to do. - */ - if (isnull) - { - if (column->bv_hasnulls) - PG_RETURN_BOOL(false); - - column->bv_hasnulls = true; - PG_RETURN_BOOL(true); - } + Assert(!isnull); attno = column->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); @@ -156,52 +146,9 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) int nkeys = PG_GETARG_INT32(3); Oid colloid = PG_GET_COLLATION(); int keyno; - bool has_regular_keys = false; - - /* handle IS NULL/IS NOT NULL tests */ - for (keyno = 0; keyno < nkeys; keyno++) - { - ScanKey key = keys[keyno]; - - Assert(key->sk_attno == column->bv_attno); - - /* Skip regular scan keys (and remember that we have some). */ - if ((!key->sk_flags & SK_ISNULL)) - { - has_regular_keys = true; - continue; - } - if (key->sk_flags & SK_SEARCHNULL) - { - if (column->bv_allnulls || column->bv_hasnulls) - continue; /* this key is fine, continue */ - - PG_RETURN_BOOL(false); - } - - /* - * For IS NOT NULL, we can only skip ranges that are known to have - * only nulls. - */ - if (key->sk_flags & SK_SEARCHNOTNULL) - { - if (column->bv_allnulls) - PG_RETURN_BOOL(false); - - continue; - } - - /* - * Neither IS NULL nor IS NOT NULL was used; assume all indexable - * operators are strict and return false. - */ - PG_RETURN_BOOL(false); - } - - /* If there are no regular keys, the page range is considered consistent. */ - if (!has_regular_keys) - PG_RETURN_BOOL(true); + /* make sure we got some scan keys */ + Assert((nkeys > 0) && (keys != NULL)); /* * If is all nulls, it cannot possibly be consistent (at this point we @@ -215,9 +162,8 @@ brin_minmax_consistent(PG_FUNCTION_ARGS) { ScanKey key = keys[keyno]; - /* ignore IS NULL/IS NOT NULL tests handled above */ - if (key->sk_flags & SK_ISNULL) - continue; + /* NULL keys are handled and filtered-out in bringetbitmap */ + Assert(!(key->sk_flags & SK_ISNULL)); /* * When there are multiple scan keys, failure to meet the criteria for @@ -307,34 +253,11 @@ brin_minmax_union(PG_FUNCTION_ARGS) bool needsadj; Assert(col_a->bv_attno == col_b->bv_attno); - - /* Adjust "hasnulls" */ - if (!col_a->bv_hasnulls && col_b->bv_hasnulls) - col_a->bv_hasnulls = true; - - /* If there are no values in B, there's nothing left to do */ - if (col_b->bv_allnulls) - PG_RETURN_VOID(); + Assert(!col_a->bv_allnulls && !col_b->bv_allnulls); attno = col_a->bv_attno; attr = TupleDescAttr(bdesc->bd_tupdesc, attno - 1); - /* - * Adjust "allnulls". If A doesn't have values, just copy the values from - * B into A, and we're done. We cannot run the operators in this case, - * because values in A might contain garbage. Note we already established - * that B contains values. - */ - if (col_a->bv_allnulls) - { - col_a->bv_allnulls = false; - col_a->bv_values[0] = datumCopy(col_b->bv_values[0], - attr->attbyval, attr->attlen); - col_a->bv_values[1] = datumCopy(col_b->bv_values[1], - attr->attbyval, attr->attlen); - PG_RETURN_VOID(); - } - /* Adjust minimum, if B's min is less than A's min */ finfo = minmax_get_strategy_procinfo(bdesc, attno, attr->atttypid, BTLessStrategyNumber); diff --git a/src/include/access/brin_internal.h b/src/include/access/brin_internal.h index 78c89a6961..79440ebe7b 100644 --- a/src/include/access/brin_internal.h +++ b/src/include/access/brin_internal.h @@ -27,6 +27,9 @@ typedef struct BrinOpcInfo /* Number of columns stored in an index column of this opclass */ uint16 oi_nstored; + /* Regular processing of NULLs in BrinValues? */ + bool oi_regular_nulls; + /* Opaque pointer for the opclass' private use */ void *oi_opaque; -- 2.30.2 --------------76348C5C2C314FA585652FE5 Content-Type: text/x-patch; charset=UTF-8; name="0004-Optimize-allocations-in-bringetbitmap-20210322.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename*0="0004-Optimize-allocations-in-bringetbitmap-20210322.patch" ^ permalink raw reply [nested|flat] 281+ messages in thread
* Re: Split index and table statistics into different types of stats @ 2023-03-16 09:24 Drouvot, Bertrand <[email protected]> 0 siblings, 0 replies; 281+ messages in thread From: Drouvot, Bertrand @ 2023-03-16 09:24 UTC (permalink / raw) To: Michael Paquier <[email protected]>; +Cc: vignesh C <[email protected]>; Bharath Rupireddy <[email protected]>; Andres Freund <[email protected]>; Melanie Plageman <[email protected]>; PostgreSQL Hackers <[email protected]> Hi, On 3/16/23 7:54 AM, Michael Paquier wrote: > On Sat, Jan 21, 2023 at 06:42:51AM +0100, Drouvot, Bertrand wrote: >> Please find attached a rebased version (previous comments >> up-thread still need to be addressed though). > > This patch has a lot of conflicts. Could you send a rebased version? Thanks for looking at it! Please find attached v10. Please note that the previous comments up-thread still need to be addressed though, and that this patch is also somehow linked to the: "Generate pg_stat_get_xact*() functions with Macros" patch (see [1]) (which itself has some dependencies, see [2]) My plan was to get [1] done before resuming working on the "Split index and table statistics into different types of stats" one. Regards, [1]: https://commitfest.postgresql.org/42/4106/ [2]: https://www.postgresql.org/message-id/11744b0e-5f7f-aba8-7d9c-2ff0a0c6e2b2%40gmail.com -- Bertrand Drouvot PostgreSQL Contributors Team RDS Open Source Databases Amazon Web Services: https://aws.amazon.com diff --git a/src/backend/access/common/relation.c b/src/backend/access/common/relation.c index 4017e175e3..fca166a063 100644 --- a/src/backend/access/common/relation.c +++ b/src/backend/access/common/relation.c @@ -73,7 +73,10 @@ relation_open(Oid relationId, LOCKMODE lockmode) if (RelationUsesLocalBuffers(r)) MyXactFlags |= XACT_FLAGS_ACCESSEDTEMPNAMESPACE; - pgstat_init_relation(r); + if (r->rd_rel->relkind == RELKIND_INDEX) + pgstat_init_index(r); + else + pgstat_init_table(r); return r; } @@ -123,7 +126,10 @@ try_relation_open(Oid relationId, LOCKMODE lockmode) if (RelationUsesLocalBuffers(r)) MyXactFlags |= XACT_FLAGS_ACCESSEDTEMPNAMESPACE; - pgstat_init_relation(r); + if (r->rd_rel->relkind == RELKIND_INDEX) + pgstat_init_index(r); + else + pgstat_init_table(r); return r; } diff --git a/src/backend/access/index/indexam.c b/src/backend/access/index/indexam.c index dbf147ed22..5b83146eef 100644 --- a/src/backend/access/index/indexam.c +++ b/src/backend/access/index/indexam.c @@ -590,7 +590,7 @@ index_fetch_heap(IndexScanDesc scan, TupleTableSlot *slot) &scan->xs_heap_continue, &all_dead); if (found) - pgstat_count_heap_fetch(scan->indexRelation); + pgstat_count_index_fetch(scan->indexRelation); /* * If we scanned a whole HOT chain and found only dead tuples, tell index diff --git a/src/backend/catalog/heap.c b/src/backend/catalog/heap.c index 4f006820b8..4e9569c901 100644 --- a/src/backend/catalog/heap.c +++ b/src/backend/catalog/heap.c @@ -404,7 +404,10 @@ heap_create(const char *relname, reltablespace); /* ensure that stats are dropped if transaction aborts */ - pgstat_create_relation(rel); + if (rel->rd_rel->relkind == RELKIND_INDEX) + pgstat_create_index(rel); + else + pgstat_create_table(rel); return rel; } @@ -1853,7 +1856,7 @@ heap_drop_with_catalog(Oid relid) RelationDropStorage(rel); /* ensure that stats are dropped if transaction commits */ - pgstat_drop_relation(rel); + pgstat_drop_table(rel); /* * Close relcache entry, but *keep* AccessExclusiveLock on the relation diff --git a/src/backend/catalog/index.c b/src/backend/catalog/index.c index 7777e7ec77..cb602484e7 100644 --- a/src/backend/catalog/index.c +++ b/src/backend/catalog/index.c @@ -1765,7 +1765,7 @@ index_concurrently_swap(Oid newIndexId, Oid oldIndexId, const char *oldName) changeDependenciesOn(RelationRelationId, oldIndexId, newIndexId); /* copy over statistics from old to new index */ - pgstat_copy_relation_stats(newClassRel, oldClassRel); + pgstat_copy_index_stats(newClassRel, oldClassRel); /* Copy data of pg_statistic from the old index to the new one */ CopyStatistics(oldIndexId, newIndexId); @@ -2339,7 +2339,7 @@ index_drop(Oid indexId, bool concurrent, bool concurrent_lock_mode) RelationDropStorage(userIndexRelation); /* ensure that stats are dropped if transaction commits */ - pgstat_drop_relation(userIndexRelation); + pgstat_drop_index(userIndexRelation); /* * Close and flush the index's relcache entry, to ensure relcache doesn't diff --git a/src/backend/catalog/system_views.sql b/src/backend/catalog/system_views.sql index 34ca0e739f..5a0fe0d99a 100644 --- a/src/backend/catalog/system_views.sql +++ b/src/backend/catalog/system_views.sql @@ -654,29 +654,29 @@ CREATE VIEW pg_stat_all_tables AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_numscans(C.oid) AS seq_scan, - pg_stat_get_lastscan(C.oid) AS last_seq_scan, - pg_stat_get_tuples_returned(C.oid) AS seq_tup_read, - sum(pg_stat_get_numscans(I.indexrelid))::bigint AS idx_scan, - max(pg_stat_get_lastscan(I.indexrelid)) AS last_idx_scan, - sum(pg_stat_get_tuples_fetched(I.indexrelid))::bigint + - pg_stat_get_tuples_fetched(C.oid) AS idx_tup_fetch, - pg_stat_get_tuples_inserted(C.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(C.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(C.oid) AS n_tup_del, - pg_stat_get_tuples_hot_updated(C.oid) AS n_tup_hot_upd, - pg_stat_get_live_tuples(C.oid) AS n_live_tup, - pg_stat_get_dead_tuples(C.oid) AS n_dead_tup, - pg_stat_get_mod_since_analyze(C.oid) AS n_mod_since_analyze, - pg_stat_get_ins_since_vacuum(C.oid) AS n_ins_since_vacuum, - pg_stat_get_last_vacuum_time(C.oid) as last_vacuum, - pg_stat_get_last_autovacuum_time(C.oid) as last_autovacuum, - pg_stat_get_last_analyze_time(C.oid) as last_analyze, - pg_stat_get_last_autoanalyze_time(C.oid) as last_autoanalyze, - pg_stat_get_vacuum_count(C.oid) AS vacuum_count, - pg_stat_get_autovacuum_count(C.oid) AS autovacuum_count, - pg_stat_get_analyze_count(C.oid) AS analyze_count, - pg_stat_get_autoanalyze_count(C.oid) AS autoanalyze_count + pg_stat_get_tab_numscans(C.oid) AS seq_scan, + pg_stat_get_tab_lastscan(C.oid) AS last_seq_scan, + pg_stat_get_tab_tuples_returned(C.oid) AS seq_tup_read, + sum(pg_stat_get_ind_numscans(I.indexrelid))::bigint AS idx_scan, + max(pg_stat_get_ind_lastscan(I.indexrelid)) AS last_idx_scan, + sum(pg_stat_get_ind_tuples_fetched(I.indexrelid))::bigint + + pg_stat_get_tab_tuples_fetched(C.oid) AS idx_tup_fetch, + pg_stat_get_tab_tuples_inserted(C.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(C.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(C.oid) AS n_tup_del, + pg_stat_get_tab_tuples_hot_updated(C.oid) AS n_tup_hot_upd, + pg_stat_get_tab_live_tuples(C.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(C.oid) AS n_dead_tup, + pg_stat_get_tab_mod_since_analyze(C.oid) AS n_mod_since_analyze, + pg_stat_get_tab_ins_since_vacuum(C.oid) AS n_ins_since_vacuum, + pg_stat_get_tab_last_vacuum_time(C.oid) as last_vacuum, + pg_stat_get_tab_last_autovacuum_time(C.oid) as last_autovacuum, + pg_stat_get_tab_last_analyze_time(C.oid) as last_analyze, + pg_stat_get_tab_last_autoanalyze_time(C.oid) as last_autoanalyze, + pg_stat_get_tab_vacuum_count(C.oid) AS vacuum_count, + pg_stat_get_tab_autovacuum_count(C.oid) AS autovacuum_count, + pg_stat_get_tab_analyze_count(C.oid) AS analyze_count, + pg_stat_get_tab_autoanalyze_count(C.oid) AS autoanalyze_count FROM pg_class C LEFT JOIN pg_index I ON C.oid = I.indrelid LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace) @@ -688,9 +688,9 @@ CREATE VIEW pg_stat_xact_all_tables AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_xact_numscans(C.oid) AS seq_scan, + pg_stat_get_tab_xact_numscans(C.oid) AS seq_scan, pg_stat_get_xact_tuples_returned(C.oid) AS seq_tup_read, - sum(pg_stat_get_xact_numscans(I.indexrelid))::bigint AS idx_scan, + sum(pg_stat_get_ind_xact_numscans(I.indexrelid))::bigint AS idx_scan, sum(pg_stat_get_xact_tuples_fetched(I.indexrelid))::bigint + pg_stat_get_xact_tuples_fetched(C.oid) AS idx_tup_fetch, pg_stat_get_xact_tuples_inserted(C.oid) AS n_tup_ins, @@ -728,31 +728,31 @@ CREATE VIEW pg_statio_all_tables AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_blocks_fetched(C.oid) - - pg_stat_get_blocks_hit(C.oid) AS heap_blks_read, - pg_stat_get_blocks_hit(C.oid) AS heap_blks_hit, + pg_stat_get_tab_blocks_fetched(C.oid) - + pg_stat_get_tab_blocks_hit(C.oid) AS heap_blks_read, + pg_stat_get_tab_blocks_hit(C.oid) AS heap_blks_hit, I.idx_blks_read AS idx_blks_read, I.idx_blks_hit AS idx_blks_hit, - pg_stat_get_blocks_fetched(T.oid) - - pg_stat_get_blocks_hit(T.oid) AS toast_blks_read, - pg_stat_get_blocks_hit(T.oid) AS toast_blks_hit, + pg_stat_get_tab_blocks_fetched(T.oid) - + pg_stat_get_tab_blocks_hit(T.oid) AS toast_blks_read, + pg_stat_get_tab_blocks_hit(T.oid) AS toast_blks_hit, X.idx_blks_read AS tidx_blks_read, X.idx_blks_hit AS tidx_blks_hit FROM pg_class C LEFT JOIN pg_class T ON C.reltoastrelid = T.oid LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace) LEFT JOIN LATERAL ( - SELECT sum(pg_stat_get_blocks_fetched(indexrelid) - - pg_stat_get_blocks_hit(indexrelid))::bigint + SELECT sum(pg_stat_get_ind_blocks_fetched(indexrelid) - + pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_read, - sum(pg_stat_get_blocks_hit(indexrelid))::bigint + sum(pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_hit FROM pg_index WHERE indrelid = C.oid ) I ON true LEFT JOIN LATERAL ( - SELECT sum(pg_stat_get_blocks_fetched(indexrelid) - - pg_stat_get_blocks_hit(indexrelid))::bigint + SELECT sum(pg_stat_get_ind_blocks_fetched(indexrelid) - + pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_read, - sum(pg_stat_get_blocks_hit(indexrelid))::bigint + sum(pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_hit FROM pg_index WHERE indrelid = T.oid ) X ON true WHERE C.relkind IN ('r', 't', 'm'); @@ -774,10 +774,10 @@ CREATE VIEW pg_stat_all_indexes AS N.nspname AS schemaname, C.relname AS relname, I.relname AS indexrelname, - pg_stat_get_numscans(I.oid) AS idx_scan, - pg_stat_get_lastscan(I.oid) AS last_idx_scan, - pg_stat_get_tuples_returned(I.oid) AS idx_tup_read, - pg_stat_get_tuples_fetched(I.oid) AS idx_tup_fetch + pg_stat_get_ind_numscans(I.oid) AS idx_scan, + pg_stat_get_ind_lastscan(I.oid) AS last_idx_scan, + pg_stat_get_ind_tuples_returned(I.oid) AS idx_tup_read, + pg_stat_get_ind_tuples_fetched(I.oid) AS idx_tup_fetch FROM pg_class C JOIN pg_index X ON C.oid = X.indrelid JOIN pg_class I ON I.oid = X.indexrelid @@ -801,9 +801,9 @@ CREATE VIEW pg_statio_all_indexes AS N.nspname AS schemaname, C.relname AS relname, I.relname AS indexrelname, - pg_stat_get_blocks_fetched(I.oid) - - pg_stat_get_blocks_hit(I.oid) AS idx_blks_read, - pg_stat_get_blocks_hit(I.oid) AS idx_blks_hit + pg_stat_get_ind_blocks_fetched(I.oid) - + pg_stat_get_ind_blocks_hit(I.oid) AS idx_blks_read, + pg_stat_get_ind_blocks_hit(I.oid) AS idx_blks_hit FROM pg_class C JOIN pg_index X ON C.oid = X.indrelid JOIN pg_class I ON I.oid = X.indexrelid @@ -825,9 +825,9 @@ CREATE VIEW pg_statio_all_sequences AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_blocks_fetched(C.oid) - - pg_stat_get_blocks_hit(C.oid) AS blks_read, - pg_stat_get_blocks_hit(C.oid) AS blks_hit + pg_stat_get_ind_blocks_fetched(C.oid) - + pg_stat_get_tab_blocks_hit(C.oid) AS blks_read, + pg_stat_get_tab_blocks_hit(C.oid) AS blks_hit FROM pg_class C LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace) WHERE C.relkind = 'S'; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index 0a05577b68..daa3046bc6 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -768,11 +768,19 @@ ReadBufferExtended(Relation reln, ForkNumber forkNum, BlockNumber blockNum, * Read the buffer, and update pgstat counters to reflect a cache hit or * miss. */ - pgstat_count_buffer_read(reln); + if (reln->rd_rel->relkind == RELKIND_INDEX) + pgstat_count_index_buffer_read(reln); + else + pgstat_count_table_buffer_read(reln); buf = ReadBuffer_common(RelationGetSmgr(reln), reln->rd_rel->relpersistence, forkNum, blockNum, mode, strategy, &hit); if (hit) - pgstat_count_buffer_hit(reln); + { + if (reln->rd_rel->relkind == RELKIND_INDEX) + pgstat_count_index_buffer_hit(reln); + else + pgstat_count_table_buffer_hit(reln); + } return buf; } diff --git a/src/backend/utils/activity/Makefile b/src/backend/utils/activity/Makefile index 7d7482dde0..a73d529894 100644 --- a/src/backend/utils/activity/Makefile +++ b/src/backend/utils/activity/Makefile @@ -23,11 +23,12 @@ OBJS = \ pgstat_database.o \ pgstat_function.o \ pgstat_io.o \ - pgstat_relation.o \ + pgstat_index.o \ pgstat_replslot.o \ pgstat_shmem.o \ pgstat_slru.o \ pgstat_subscription.o \ + pgstat_table.o \ pgstat_wal.o \ pgstat_xact.o \ wait_event.o diff --git a/src/backend/utils/activity/meson.build b/src/backend/utils/activity/meson.build index 518ee3f798..80d611c40d 100644 --- a/src/backend/utils/activity/meson.build +++ b/src/backend/utils/activity/meson.build @@ -10,11 +10,12 @@ backend_sources += files( 'pgstat_database.c', 'pgstat_function.c', 'pgstat_io.c', - 'pgstat_relation.c', + 'pgstat_index.c', 'pgstat_replslot.c', 'pgstat_shmem.c', 'pgstat_slru.c', 'pgstat_subscription.c', + 'pgstat_table.c', 'pgstat_wal.c', 'pgstat_xact.c', 'wait_event.c', diff --git a/src/backend/utils/activity/pgstat.c b/src/backend/utils/activity/pgstat.c index b125802b21..03edd1265c 100644 --- a/src/backend/utils/activity/pgstat.c +++ b/src/backend/utils/activity/pgstat.c @@ -73,10 +73,11 @@ * - pgstat_database.c * - pgstat_function.c * - pgstat_io.c - * - pgstat_relation.c + * - pgstat_index.c * - pgstat_replslot.c * - pgstat_slru.c * - pgstat_subscription.c + * - pgstat_table.c * - pgstat_wal.c * * Whenever possible infrastructure files should not contain code related to @@ -270,18 +271,32 @@ static const PgStat_KindInfo pgstat_kind_infos[PGSTAT_NUM_KINDS] = { .reset_timestamp_cb = pgstat_database_reset_timestamp_cb, }, - [PGSTAT_KIND_RELATION] = { - .name = "relation", + [PGSTAT_KIND_TABLE] = { + .name = "table", .fixed_amount = false, - .shared_size = sizeof(PgStatShared_Relation), - .shared_data_off = offsetof(PgStatShared_Relation, stats), - .shared_data_len = sizeof(((PgStatShared_Relation *) 0)->stats), + .shared_size = sizeof(PgStatShared_Table), + .shared_data_off = offsetof(PgStatShared_Table, stats), + .shared_data_len = sizeof(((PgStatShared_Table *) 0)->stats), .pending_size = sizeof(PgStat_TableStatus), - .flush_pending_cb = pgstat_relation_flush_cb, - .delete_pending_cb = pgstat_relation_delete_pending_cb, + .flush_pending_cb = pgstat_table_flush_cb, + .delete_pending_cb = pgstat_table_delete_pending_cb, + }, + + [PGSTAT_KIND_INDEX] = { + .name = "index", + + .fixed_amount = false, + + .shared_size = sizeof(PgStatShared_Index), + .shared_data_off = offsetof(PgStatShared_Index, stats), + .shared_data_len = sizeof(((PgStatShared_Index *) 0)->stats), + .pending_size = sizeof(PgStat_IndexStatus), + + .flush_pending_cb = pgstat_index_flush_cb, + .delete_pending_cb = pgstat_index_delete_pending_cb, }, [PGSTAT_KIND_FUNCTION] = { diff --git a/src/backend/utils/activity/pgstat_index.c b/src/backend/utils/activity/pgstat_index.c new file mode 100644 index 0000000000..882f6cf30d --- /dev/null +++ b/src/backend/utils/activity/pgstat_index.c @@ -0,0 +1,297 @@ +/* ------------------------------------------------------------------------- + * + * pgstat_index.c + * Implementation of index statistics. + * + * This file contains the implementation of function index. It is kept + * separate from pgstat.c to enforce the line between the statistics access / + * storage implementation and the details about individual types of + * statistics. + * + * Copyright (c) 2001-2023, PostgreSQL Global Development Group + * + * IDENTIFICATION + * src/backend/utils/activity/pgstat_index.c + * ------------------------------------------------------------------------- + */ + +#include "postgres.h" + +#include "access/xact.h" +#include "utils/pgstat_internal.h" +#include "utils/rel.h" +#include "catalog/catalog.h" + +static PgStat_IndexStatus *pgstat_prep_index_pending(Oid rel_id, bool isshared); + +/* + * Copy stats between indexes. This is used for things like REINDEX + * CONCURRENTLY. + */ +void +pgstat_copy_index_stats(Relation dst, Relation src) +{ + PgStat_StatIndEntry *srcstats; + PgStatShared_Index *dstshstats; + PgStat_EntryRef *dst_ref; + + srcstats = pgstat_fetch_stat_indentry_ext(src->rd_rel->relisshared, + RelationGetRelid(src)); + if (!srcstats) + return; + + dst_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_INDEX, + dst->rd_rel->relisshared ? InvalidOid : MyDatabaseId, + RelationGetRelid(dst), + false); + + dstshstats = (PgStatShared_Index *) dst_ref->shared_stats; + dstshstats->stats = *srcstats; + + pgstat_unlock_entry(dst_ref); +} + +/* + * Initialize a relcache entry to count access statistics. Called whenever an + * index is opened. + * + * We assume that a relcache entry's pgstatind_info field is zeroed by relcache.c + * when the relcache entry is made; thereafter it is long-lived data. + * + * This does not create a reference to a stats entry in shared memory, nor + * allocate memory for the pending stats. That happens in + * pgstat_assoc_index(). + */ +void +pgstat_init_index(Relation rel) +{ + /* + * We only count stats for indexes + */ + Assert(rel->rd_rel->relkind == RELKIND_INDEX); + + if (!pgstat_track_counts) + { + if (rel->pgstatind_info != NULL) + pgstat_unlink_index(rel); + + /* We're not counting at all */ + rel->pgstat_enabled = false; + rel->pgstatind_info = NULL; + return; + } + + rel->pgstat_enabled = true; +} + +/* + * Prepare for statistics for this index to be collected. + * + * This ensures we have a reference to the stats entry before stats can be + * generated. That is important because an index drop in another + * connection could otherwise lead to the stats entry being dropped, which then + * later would get recreated when flushing stats. + * + * This is separate from pgstat_init_index() as it is not uncommon for + * relcache entries to be opened without ever getting stats reported. + */ +void +pgstat_assoc_index(Relation rel) +{ + Assert(rel->pgstat_enabled); + Assert(rel->pgstatind_info == NULL); + + /* Else find or make the PgStat_IndexStatus entry, and update link */ + rel->pgstatind_info = pgstat_prep_index_pending(RelationGetRelid(rel), + rel->rd_rel->relisshared); + + /* don't allow link a stats to multiple relcache entries */ + Assert(rel->pgstatind_info->relation == NULL); + + /* mark this relation as the owner */ + rel->pgstatind_info->relation = rel; +} + +/* + * Break the mutual link between a relcache entry and pending index stats entry. + * This must be called whenever one end of the link is removed. + */ +void +pgstat_unlink_index(Relation rel) +{ + + if (rel->pgstatind_info == NULL) + return; + + /* link sanity check for the index stats */ + if (rel->pgstatind_info) + { + Assert(rel->pgstatind_info->relation == rel); + rel->pgstatind_info->relation = NULL; + rel->pgstatind_info = NULL; + } +} + +/* + * Ensure that index stats are dropped if transaction aborts. + */ +void +pgstat_create_index(Relation rel) +{ + pgstat_create_transactional(PGSTAT_KIND_INDEX, + rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, + RelationGetRelid(rel)); +} + +/* + * Ensure that index stats are dropped if transaction commits. + */ +void +pgstat_drop_index(Relation rel) +{ + pgstat_drop_transactional(PGSTAT_KIND_INDEX, + rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, + RelationGetRelid(rel)); +} + +/* + * Support function for the SQL-callable pgstat* functions. Returns + * the collected statistics for one index or NULL. NULL doesn't mean + * that the index doesn't exist, just that there are no statistics, so the + * caller is better off to report ZERO instead. + */ +PgStat_StatIndEntry * +pgstat_fetch_stat_indentry(Oid relid) +{ + return pgstat_fetch_stat_indentry_ext(IsSharedRelation(relid), relid); +} + +/* + * More efficient version of pgstat_fetch_stat_indentry(), allowing to specify + * whether the to-be-accessed index is shared or not. + */ +PgStat_StatIndEntry * +pgstat_fetch_stat_indentry_ext(bool shared, Oid reloid) +{ + Oid dboid = (shared ? InvalidOid : MyDatabaseId); + + return (PgStat_StatIndEntry *) + pgstat_fetch_entry(PGSTAT_KIND_INDEX, dboid, reloid); +} + +/* + * find any existing PgStat_IndexStatus entry for rel + * + * Find any existing PgStat_IndexStatus entry for rel_id in the current + * database. If not found, try finding from shared indexes. + * + * If no entry found, return NULL, don't create a new one + */ +PgStat_IndexStatus * +find_indstat_entry(Oid rel_id) +{ + PgStat_EntryRef *entry_ref; + + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_INDEX, MyDatabaseId, rel_id); + if (!entry_ref) + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_INDEX, InvalidOid, rel_id); + + if (entry_ref) + return entry_ref->pending; + return NULL; +} + +/* + * Flush out pending stats for the entry + * + * If nowait is true, this function returns false if lock could not + * immediately acquired, otherwise true is returned. + * + * Some of the stats are copied to the corresponding pending database stats + * entry when successfully flushing. + */ +bool +pgstat_index_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) +{ + static const PgStat_IndexCounts all_zeroes; + Oid dboid; + + PgStat_IndexStatus *lstats; /* pending stats entry */ + PgStatShared_Index *shrelcomstats; + PgStat_StatIndEntry *indentry; /* index entry of shared stats */ + PgStat_StatDBEntry *dbentry; /* pending database entry */ + + dboid = entry_ref->shared_entry->key.dboid; + lstats = (PgStat_IndexStatus *) entry_ref->pending; + shrelcomstats = (PgStatShared_Index *) entry_ref->shared_stats; + + /* + * Ignore entries that didn't accumulate any actual counts, such as + * indexes that were opened by the planner but not used. + */ + if (memcmp(&lstats->i_counts, &all_zeroes, + sizeof(PgStat_IndexCounts)) == 0) + { + return true; + } + + if (!pgstat_lock_entry(entry_ref, nowait)) + return false; + + /* add the values to the shared entry. */ + indentry = &shrelcomstats->stats; + + indentry->numscans += lstats->i_counts.i_numscans; + + if (lstats->i_counts.i_numscans) + { + TimestampTz t = GetCurrentTransactionStopTimestamp(); + + if (t > indentry->lastscan) + indentry->lastscan = t; + } + indentry->tuples_returned += lstats->i_counts.i_tuples_returned; + indentry->tuples_fetched += lstats->i_counts.i_tuples_fetched; + indentry->blocks_fetched += lstats->i_counts.i_blocks_fetched; + indentry->blocks_hit += lstats->i_counts.i_blocks_hit; + + pgstat_unlock_entry(entry_ref); + + /* The entry was successfully flushed, add the same to database stats */ + dbentry = pgstat_prep_database_pending(dboid); + dbentry->tuples_returned += lstats->i_counts.i_tuples_returned; + dbentry->tuples_fetched += lstats->i_counts.i_tuples_fetched; + dbentry->blocks_fetched += lstats->i_counts.i_blocks_fetched; + dbentry->blocks_hit += lstats->i_counts.i_blocks_hit; + + return true; +} + +void +pgstat_index_delete_pending_cb(PgStat_EntryRef *entry_ref) +{ + PgStat_IndexStatus *pending = (PgStat_IndexStatus *) entry_ref->pending; + + if (pending->relation) + pgstat_unlink_index(pending->relation); +} + +/* + * Find or create a PgStat_IndexStatus entry for rel. New entry is created and + * initialized if not exists. + */ +static PgStat_IndexStatus * +pgstat_prep_index_pending(Oid rel_id, bool isshared) +{ + PgStat_EntryRef *entry_ref; + PgStat_IndexStatus *pending; + + entry_ref = pgstat_prep_pending_entry(PGSTAT_KIND_INDEX, + isshared ? InvalidOid : MyDatabaseId, + rel_id, NULL); + pending = entry_ref->pending; + pending->r_id = rel_id; + pending->r_shared = isshared; + + return pending; +} diff --git a/src/backend/utils/activity/pgstat_relation.c b/src/backend/utils/activity/pgstat_table.c similarity index 76% rename from src/backend/utils/activity/pgstat_relation.c rename to src/backend/utils/activity/pgstat_table.c index f793ac1516..51ac4e41e2 100644 --- a/src/backend/utils/activity/pgstat_relation.c +++ b/src/backend/utils/activity/pgstat_table.c @@ -1,9 +1,9 @@ /* ------------------------------------------------------------------------- * - * pgstat_relation.c - * Implementation of relation statistics. + * pgstat_table.c + * Implementation of table statistics. * - * This file contains the implementation of function relation. It is kept + * This file contains the implementation of function table. It is kept * separate from pgstat.c to enforce the line between the statistics access / * storage implementation and the details about individual types of * statistics. @@ -11,7 +11,7 @@ * Copyright (c) 2001-2023, PostgreSQL Global Development Group * * IDENTIFICATION - * src/backend/utils/activity/pgstat_relation.c + * src/backend/utils/activity/pgstat_table.c * ------------------------------------------------------------------------- */ @@ -44,74 +44,48 @@ typedef struct TwoPhasePgStatRecord } TwoPhasePgStatRecord; -static PgStat_TableStatus *pgstat_prep_relation_pending(Oid rel_id, bool isshared); -static void add_tabstat_xact_level(PgStat_TableStatus *pgstat_info, int nest_level); -static void ensure_tabstat_xact_level(PgStat_TableStatus *pgstat_info); +static PgStat_TableStatus *pgstat_prep_table_pending(Oid rel_id, bool isshared); +static void add_tabstat_xact_level(PgStat_TableStatus *pgstattab_info, int nest_level); +static void ensure_tabstat_xact_level(PgStat_TableStatus *pgstattab_info); static void save_truncdrop_counters(PgStat_TableXactStatus *trans, bool is_drop); static void restore_truncdrop_counters(PgStat_TableXactStatus *trans); - -/* - * Copy stats between relations. This is used for things like REINDEX - * CONCURRENTLY. - */ -void -pgstat_copy_relation_stats(Relation dst, Relation src) -{ - PgStat_StatTabEntry *srcstats; - PgStatShared_Relation *dstshstats; - PgStat_EntryRef *dst_ref; - - srcstats = pgstat_fetch_stat_tabentry_ext(src->rd_rel->relisshared, - RelationGetRelid(src)); - if (!srcstats) - return; - - dst_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_RELATION, - dst->rd_rel->relisshared ? InvalidOid : MyDatabaseId, - RelationGetRelid(dst), - false); - - dstshstats = (PgStatShared_Relation *) dst_ref->shared_stats; - dstshstats->stats = *srcstats; - - pgstat_unlock_entry(dst_ref); -} - /* * Initialize a relcache entry to count access statistics. Called whenever a - * relation is opened. + * table is opened. * - * We assume that a relcache entry's pgstat_info field is zeroed by relcache.c + * We assume that a relcache entry's pgstattab_info field is zeroed by relcache.c * when the relcache entry is made; thereafter it is long-lived data. * * This does not create a reference to a stats entry in shared memory, nor * allocate memory for the pending stats. That happens in - * pgstat_assoc_relation(). + * pgstat_assoc_table(). */ void -pgstat_init_relation(Relation rel) +pgstat_init_table(Relation rel) { char relkind = rel->rd_rel->relkind; + Assert(relkind != RELKIND_INDEX); + /* * We only count stats for relations with storage and partitioned tables */ if (!RELKIND_HAS_STORAGE(relkind) && relkind != RELKIND_PARTITIONED_TABLE) { rel->pgstat_enabled = false; - rel->pgstat_info = NULL; + rel->pgstattab_info = NULL; return; } if (!pgstat_track_counts) { - if (rel->pgstat_info) - pgstat_unlink_relation(rel); + if (rel->pgstattab_info != NULL) + pgstat_unlink_table(rel); /* We're not counting at all */ rel->pgstat_enabled = false; - rel->pgstat_info = NULL; + rel->pgstattab_info = NULL; return; } @@ -119,89 +93,92 @@ pgstat_init_relation(Relation rel) } /* - * Prepare for statistics for this relation to be collected. + * Prepare for statistics for this table to be collected. * * This ensures we have a reference to the stats entry before stats can be - * generated. That is important because a relation drop in another connection + * generated. That is important because a table drop in another connection * could otherwise lead to the stats entry being dropped, which then later * would get recreated when flushing stats. * - * This is separate from pgstat_init_relation() as it is not uncommon for + * This is separate from pgstat_init_table() as it is not uncommon for * relcache entries to be opened without ever getting stats reported. */ void -pgstat_assoc_relation(Relation rel) +pgstat_assoc_table(Relation rel) { Assert(rel->pgstat_enabled); - Assert(rel->pgstat_info == NULL); + Assert(rel->pgstattab_info == NULL); /* Else find or make the PgStat_TableStatus entry, and update link */ - rel->pgstat_info = pgstat_prep_relation_pending(RelationGetRelid(rel), + rel->pgstattab_info = pgstat_prep_table_pending(RelationGetRelid(rel), rel->rd_rel->relisshared); /* don't allow link a stats to multiple relcache entries */ - Assert(rel->pgstat_info->relation == NULL); + Assert(rel->pgstattab_info->relation == NULL); /* mark this relation as the owner */ - rel->pgstat_info->relation = rel; + rel->pgstattab_info->relation = rel; } /* - * Break the mutual link between a relcache entry and pending stats entry. + * Break the mutual link between a relcache entry and pending table stats entry. * This must be called whenever one end of the link is removed. */ void -pgstat_unlink_relation(Relation rel) +pgstat_unlink_table(Relation rel) { - /* remove the link to stats info if any */ - if (rel->pgstat_info == NULL) + + if (rel->pgstattab_info == NULL) return; - /* link sanity check */ - Assert(rel->pgstat_info->relation == rel); - rel->pgstat_info->relation = NULL; - rel->pgstat_info = NULL; + /* link sanity check for the table stats */ + if (rel->pgstattab_info) + { + Assert(rel->pgstattab_info->relation == rel); + rel->pgstattab_info->relation = NULL; + rel->pgstattab_info = NULL; + } } /* - * Ensure that stats are dropped if transaction aborts. + * Ensure that table stats are dropped if transaction aborts. */ void -pgstat_create_relation(Relation rel) +pgstat_create_table(Relation rel) { - pgstat_create_transactional(PGSTAT_KIND_RELATION, + pgstat_create_transactional(PGSTAT_KIND_TABLE, rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, RelationGetRelid(rel)); } /* - * Ensure that stats are dropped if transaction commits. + * Ensure that table stats are dropped if transaction commits. */ void -pgstat_drop_relation(Relation rel) +pgstat_drop_table(Relation rel) { int nest_level = GetCurrentTransactionNestLevel(); - PgStat_TableStatus *pgstat_info; + PgStat_TableStatus *pgstattab_info; - pgstat_drop_transactional(PGSTAT_KIND_RELATION, + pgstat_drop_transactional(PGSTAT_KIND_TABLE, rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, RelationGetRelid(rel)); - if (!pgstat_should_count_relation(rel)) + if (!pgstat_should_count_table(rel)) return; /* * Transactionally set counters to 0. That ensures that accesses to * pg_stat_xact_all_tables inside the transaction show 0. */ - pgstat_info = rel->pgstat_info; - if (pgstat_info->trans && - pgstat_info->trans->nest_level == nest_level) + pgstattab_info = rel->pgstattab_info; + if (pgstattab_info->trans && + pgstattab_info->trans->nest_level == nest_level) { - save_truncdrop_counters(pgstat_info->trans, true); - pgstat_info->trans->tuples_inserted = 0; - pgstat_info->trans->tuples_updated = 0; - pgstat_info->trans->tuples_deleted = 0; + save_truncdrop_counters(pgstattab_info->trans, true); + pgstattab_info->trans->tuples_inserted = 0; + pgstattab_info->trans->tuples_updated = 0; + pgstattab_info->trans->tuples_deleted = 0; } } @@ -213,7 +190,7 @@ pgstat_report_vacuum(Oid tableoid, bool shared, PgStat_Counter livetuples, PgStat_Counter deadtuples) { PgStat_EntryRef *entry_ref; - PgStatShared_Relation *shtabentry; + PgStatShared_Table *shtabentry; PgStat_StatTabEntry *tabentry; Oid dboid = (shared ? InvalidOid : MyDatabaseId); TimestampTz ts; @@ -225,10 +202,10 @@ pgstat_report_vacuum(Oid tableoid, bool shared, ts = GetCurrentTimestamp(); /* block acquiring lock for the same reason as pgstat_report_autovac() */ - entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_RELATION, + entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_TABLE, dboid, tableoid, false); - shtabentry = (PgStatShared_Relation *) entry_ref->shared_stats; + shtabentry = (PgStatShared_Table *) entry_ref->shared_stats; tabentry = &shtabentry->stats; tabentry->live_tuples = livetuples; @@ -280,7 +257,7 @@ pgstat_report_analyze(Relation rel, bool resetcounter) { PgStat_EntryRef *entry_ref; - PgStatShared_Relation *shtabentry; + PgStatShared_Table *shtabentry; PgStat_StatTabEntry *tabentry; Oid dboid = (rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId); @@ -299,31 +276,31 @@ pgstat_report_analyze(Relation rel, * * Waste no time on partitioned tables, though. */ - if (pgstat_should_count_relation(rel) && + if (pgstat_should_count_table(rel) && rel->rd_rel->relkind != RELKIND_PARTITIONED_TABLE) { PgStat_TableXactStatus *trans; - for (trans = rel->pgstat_info->trans; trans; trans = trans->upper) + for (trans = rel->pgstattab_info->trans; trans; trans = trans->upper) { livetuples -= trans->tuples_inserted - trans->tuples_deleted; deadtuples -= trans->tuples_updated + trans->tuples_deleted; } /* count stuff inserted by already-aborted subxacts, too */ - deadtuples -= rel->pgstat_info->t_counts.t_delta_dead_tuples; + deadtuples -= rel->pgstattab_info->t_counts.t_delta_dead_tuples; /* Since ANALYZE's counts are estimates, we could have underflowed */ livetuples = Max(livetuples, 0); deadtuples = Max(deadtuples, 0); } /* block acquiring lock for the same reason as pgstat_report_autovac() */ - entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_RELATION, dboid, + entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_TABLE, dboid, RelationGetRelid(rel), false); /* can't get dropped while accessed */ Assert(entry_ref != NULL && entry_ref->shared_stats != NULL); - shtabentry = (PgStatShared_Relation *) entry_ref->shared_stats; + shtabentry = (PgStatShared_Table *) entry_ref->shared_stats; tabentry = &shtabentry->stats; tabentry->live_tuples = livetuples; @@ -360,12 +337,12 @@ pgstat_report_analyze(Relation rel, void pgstat_count_heap_insert(Relation rel, PgStat_Counter n) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - pgstat_info->trans->tuples_inserted += n; + ensure_tabstat_xact_level(pgstattab_info); + pgstattab_info->trans->tuples_inserted += n; } } @@ -375,16 +352,16 @@ pgstat_count_heap_insert(Relation rel, PgStat_Counter n) void pgstat_count_heap_update(Relation rel, bool hot) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - pgstat_info->trans->tuples_updated++; + ensure_tabstat_xact_level(pgstattab_info); + pgstattab_info->trans->tuples_updated++; /* t_tuples_hot_updated is nontransactional, so just advance it */ if (hot) - pgstat_info->t_counts.t_tuples_hot_updated++; + pgstattab_info->t_counts.t_tuples_hot_updated++; } } @@ -394,12 +371,12 @@ pgstat_count_heap_update(Relation rel, bool hot) void pgstat_count_heap_delete(Relation rel) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - pgstat_info->trans->tuples_deleted++; + ensure_tabstat_xact_level(pgstattab_info); + pgstattab_info->trans->tuples_deleted++; } } @@ -409,15 +386,15 @@ pgstat_count_heap_delete(Relation rel) void pgstat_count_truncate(Relation rel) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - save_truncdrop_counters(pgstat_info->trans, false); - pgstat_info->trans->tuples_inserted = 0; - pgstat_info->trans->tuples_updated = 0; - pgstat_info->trans->tuples_deleted = 0; + ensure_tabstat_xact_level(pgstattab_info); + save_truncdrop_counters(pgstattab_info->trans, false); + pgstattab_info->trans->tuples_inserted = 0; + pgstattab_info->trans->tuples_updated = 0; + pgstattab_info->trans->tuples_deleted = 0; } } @@ -432,11 +409,11 @@ pgstat_count_truncate(Relation rel) void pgstat_update_heap_dead_tuples(Relation rel, int delta) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - pgstat_info->t_counts.t_delta_dead_tuples -= delta; + pgstattab_info->t_counts.t_delta_dead_tuples -= delta; } } @@ -462,7 +439,7 @@ pgstat_fetch_stat_tabentry_ext(bool shared, Oid reloid) Oid dboid = (shared ? InvalidOid : MyDatabaseId); return (PgStat_StatTabEntry *) - pgstat_fetch_entry(PGSTAT_KIND_RELATION, dboid, reloid); + pgstat_fetch_entry(PGSTAT_KIND_TABLE, dboid, reloid); } /* @@ -478,9 +455,9 @@ find_tabstat_entry(Oid rel_id) { PgStat_EntryRef *entry_ref; - entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_RELATION, MyDatabaseId, rel_id); + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_TABLE, MyDatabaseId, rel_id); if (!entry_ref) - entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_RELATION, InvalidOid, rel_id); + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_TABLE, InvalidOid, rel_id); if (entry_ref) return entry_ref->pending; @@ -488,7 +465,7 @@ find_tabstat_entry(Oid rel_id) } /* - * Perform relation stats specific end-of-transaction work. Helper for + * Perform table stats specific end-of-transaction work. Helper for * AtEOXact_PgStat. * * Transfer transactional insert/update counts into the base tabstat entries. @@ -496,7 +473,7 @@ find_tabstat_entry(Oid rel_id) * TopTransactionContext and will go away anyway. */ void -AtEOXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit) +AtEOXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit) { PgStat_TableXactStatus *trans; @@ -547,14 +524,14 @@ AtEOXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit) } /* - * Perform relation stats specific end-of-sub-transaction work. Helper for + * Perform table stats specific end-of-sub-transaction work. Helper for * AtEOSubXact_PgStat. * * Transfer transactional insert/update counts into the next higher * subtransaction state. */ void -AtEOSubXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth) +AtEOSubXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth) { PgStat_TableXactStatus *trans; PgStat_TableXactStatus *next_trans; @@ -631,11 +608,11 @@ AtEOSubXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit, in } /* - * Generate 2PC records for all the pending transaction-dependent relation + * Generate 2PC records for all the pending transaction-dependent table * stats. */ void -AtPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state) +AtPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state) { PgStat_TableXactStatus *trans; @@ -670,10 +647,10 @@ AtPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state) * reported to the stats system immediately, while the effects on live and * dead tuple counts are preserved in the 2PC state file. * - * Note: AtEOXact_PgStat_Relations is not called during PREPARE. + * Note: AtEOXact_PgStat_Tables is not called during PREPARE. */ void -PostPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state) +PostPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state) { PgStat_TableXactStatus *trans; @@ -696,27 +673,27 @@ pgstat_twophase_postcommit(TransactionId xid, uint16 info, void *recdata, uint32 len) { TwoPhasePgStatRecord *rec = (TwoPhasePgStatRecord *) recdata; - PgStat_TableStatus *pgstat_info; + PgStat_TableStatus *pgstattab_info; /* Find or create a tabstat entry for the rel */ - pgstat_info = pgstat_prep_relation_pending(rec->t_id, rec->t_shared); + pgstattab_info = pgstat_prep_table_pending(rec->t_id, rec->t_shared); /* Same math as in AtEOXact_PgStat, commit case */ - pgstat_info->t_counts.t_tuples_inserted += rec->tuples_inserted; - pgstat_info->t_counts.t_tuples_updated += rec->tuples_updated; - pgstat_info->t_counts.t_tuples_deleted += rec->tuples_deleted; - pgstat_info->t_counts.t_truncdropped = rec->t_truncdropped; + pgstattab_info->t_counts.t_tuples_inserted += rec->tuples_inserted; + pgstattab_info->t_counts.t_tuples_updated += rec->tuples_updated; + pgstattab_info->t_counts.t_tuples_deleted += rec->tuples_deleted; + pgstattab_info->t_counts.t_truncdropped = rec->t_truncdropped; if (rec->t_truncdropped) { /* forget live/dead stats seen by backend thus far */ - pgstat_info->t_counts.t_delta_live_tuples = 0; - pgstat_info->t_counts.t_delta_dead_tuples = 0; + pgstattab_info->t_counts.t_delta_live_tuples = 0; + pgstattab_info->t_counts.t_delta_dead_tuples = 0; } - pgstat_info->t_counts.t_delta_live_tuples += + pgstattab_info->t_counts.t_delta_live_tuples += rec->tuples_inserted - rec->tuples_deleted; - pgstat_info->t_counts.t_delta_dead_tuples += + pgstattab_info->t_counts.t_delta_dead_tuples += rec->tuples_updated + rec->tuples_deleted; - pgstat_info->t_counts.t_changed_tuples += + pgstattab_info->t_counts.t_changed_tuples += rec->tuples_inserted + rec->tuples_updated + rec->tuples_deleted; } @@ -732,10 +709,10 @@ pgstat_twophase_postabort(TransactionId xid, uint16 info, void *recdata, uint32 len) { TwoPhasePgStatRecord *rec = (TwoPhasePgStatRecord *) recdata; - PgStat_TableStatus *pgstat_info; + PgStat_TableStatus *pgstattab_info; /* Find or create a tabstat entry for the rel */ - pgstat_info = pgstat_prep_relation_pending(rec->t_id, rec->t_shared); + pgstattab_info = pgstat_prep_table_pending(rec->t_id, rec->t_shared); /* Same math as in AtEOXact_PgStat, abort case */ if (rec->t_truncdropped) @@ -744,10 +721,10 @@ pgstat_twophase_postabort(TransactionId xid, uint16 info, rec->tuples_updated = rec->updated_pre_truncdrop; rec->tuples_deleted = rec->deleted_pre_truncdrop; } - pgstat_info->t_counts.t_tuples_inserted += rec->tuples_inserted; - pgstat_info->t_counts.t_tuples_updated += rec->tuples_updated; - pgstat_info->t_counts.t_tuples_deleted += rec->tuples_deleted; - pgstat_info->t_counts.t_delta_dead_tuples += + pgstattab_info->t_counts.t_tuples_inserted += rec->tuples_inserted; + pgstattab_info->t_counts.t_tuples_updated += rec->tuples_updated; + pgstattab_info->t_counts.t_tuples_deleted += rec->tuples_deleted; + pgstattab_info->t_counts.t_delta_dead_tuples += rec->tuples_inserted + rec->tuples_updated; } @@ -761,22 +738,21 @@ pgstat_twophase_postabort(TransactionId xid, uint16 info, * entry when successfully flushing. */ bool -pgstat_relation_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) +pgstat_table_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) { static const PgStat_TableCounts all_zeroes; Oid dboid; PgStat_TableStatus *lstats; /* pending stats entry */ - PgStatShared_Relation *shtabstats; + PgStatShared_Table *shtabstats; PgStat_StatTabEntry *tabentry; /* table entry of shared stats */ PgStat_StatDBEntry *dbentry; /* pending database entry */ dboid = entry_ref->shared_entry->key.dboid; lstats = (PgStat_TableStatus *) entry_ref->pending; - shtabstats = (PgStatShared_Relation *) entry_ref->shared_stats; + shtabstats = (PgStatShared_Table *) entry_ref->shared_stats; /* - * Ignore entries that didn't accumulate any actual counts, such as - * indexes that were opened by the planner but not used. + * Ignore entries that didn't accumulate any actual counts. */ if (memcmp(&lstats->t_counts, &all_zeroes, sizeof(PgStat_TableCounts)) == 0) @@ -843,12 +819,12 @@ pgstat_relation_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) } void -pgstat_relation_delete_pending_cb(PgStat_EntryRef *entry_ref) +pgstat_table_delete_pending_cb(PgStat_EntryRef *entry_ref) { PgStat_TableStatus *pending = (PgStat_TableStatus *) entry_ref->pending; if (pending->relation) - pgstat_unlink_relation(pending->relation); + pgstat_unlink_table(pending->relation); } /* @@ -856,12 +832,12 @@ pgstat_relation_delete_pending_cb(PgStat_EntryRef *entry_ref) * initialized if not exists. */ static PgStat_TableStatus * -pgstat_prep_relation_pending(Oid rel_id, bool isshared) +pgstat_prep_table_pending(Oid rel_id, bool isshared) { PgStat_EntryRef *entry_ref; PgStat_TableStatus *pending; - entry_ref = pgstat_prep_pending_entry(PGSTAT_KIND_RELATION, + entry_ref = pgstat_prep_pending_entry(PGSTAT_KIND_TABLE, isshared ? InvalidOid : MyDatabaseId, rel_id, NULL); pending = entry_ref->pending; @@ -875,7 +851,7 @@ pgstat_prep_relation_pending(Oid rel_id, bool isshared) * add a new (sub)transaction state record */ static void -add_tabstat_xact_level(PgStat_TableStatus *pgstat_info, int nest_level) +add_tabstat_xact_level(PgStat_TableStatus *pgstattab_info, int nest_level) { PgStat_SubXactStatus *xact_state; PgStat_TableXactStatus *trans; @@ -891,24 +867,24 @@ add_tabstat_xact_level(PgStat_TableStatus *pgstat_info, int nest_level) MemoryContextAllocZero(TopTransactionContext, sizeof(PgStat_TableXactStatus)); trans->nest_level = nest_level; - trans->upper = pgstat_info->trans; - trans->parent = pgstat_info; + trans->upper = pgstattab_info->trans; + trans->parent = pgstattab_info; trans->next = xact_state->first; xact_state->first = trans; - pgstat_info->trans = trans; + pgstattab_info->trans = trans; } /* * Add a new (sub)transaction record if needed. */ static void -ensure_tabstat_xact_level(PgStat_TableStatus *pgstat_info) +ensure_tabstat_xact_level(PgStat_TableStatus *pgstattab_info) { int nest_level = GetCurrentTransactionNestLevel(); - if (pgstat_info->trans == NULL || - pgstat_info->trans->nest_level != nest_level) - add_tabstat_xact_level(pgstat_info, nest_level); + if (pgstattab_info->trans == NULL || + pgstattab_info->trans->nest_level != nest_level) + add_tabstat_xact_level(pgstattab_info, nest_level); } /* diff --git a/src/backend/utils/activity/pgstat_xact.c b/src/backend/utils/activity/pgstat_xact.c index 91cdd9222e..ee43362b73 100644 --- a/src/backend/utils/activity/pgstat_xact.c +++ b/src/backend/utils/activity/pgstat_xact.c @@ -51,7 +51,7 @@ AtEOXact_PgStat(bool isCommit, bool parallel) Assert(xact_state->nest_level == 1); Assert(xact_state->prev == NULL); - AtEOXact_PgStat_Relations(xact_state, isCommit); + AtEOXact_PgStat_Tables(xact_state, isCommit); AtEOXact_PgStat_DroppedStats(xact_state, isCommit); } pgStatXactStack = NULL; @@ -122,7 +122,7 @@ AtEOSubXact_PgStat(bool isCommit, int nestDepth) /* delink xact_state from stack immediately to simplify reuse case */ pgStatXactStack = xact_state->prev; - AtEOSubXact_PgStat_Relations(xact_state, isCommit, nestDepth); + AtEOSubXact_PgStat_Tables(xact_state, isCommit, nestDepth); AtEOSubXact_PgStat_DroppedStats(xact_state, isCommit, nestDepth); pfree(xact_state); @@ -197,7 +197,7 @@ AtPrepare_PgStat(void) Assert(xact_state->nest_level == 1); Assert(xact_state->prev == NULL); - AtPrepare_PgStat_Relations(xact_state); + AtPrepare_PgStat_Tables(xact_state); } } @@ -221,7 +221,7 @@ PostPrepare_PgStat(void) Assert(xact_state->nest_level == 1); Assert(xact_state->prev == NULL); - PostPrepare_PgStat_Relations(xact_state); + PostPrepare_PgStat_Tables(xact_state); } pgStatXactStack = NULL; diff --git a/src/backend/utils/adt/pgstatfuncs.c b/src/backend/utils/adt/pgstatfuncs.c index 35c6d46555..dc469f1b96 100644 --- a/src/backend/utils/adt/pgstatfuncs.c +++ b/src/backend/utils/adt/pgstatfuncs.c @@ -37,106 +37,159 @@ #define HAS_PGSTAT_PERMISSIONS(role) (has_privs_of_role(GetUserId(), ROLE_PG_READ_ALL_STATS) || has_privs_of_role(GetUserId(), role)) -#define PG_STAT_GET_RELENTRY_INT64(stat) \ -Datum \ -CppConcat(pg_stat_get_,stat)(PG_FUNCTION_ARGS) \ -{ \ - Oid relid = PG_GETARG_OID(0); \ - int64 result; \ - PgStat_StatTabEntry *tabentry; \ - \ - if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ - result = 0; \ - else \ - result = (int64) (tabentry->stat); \ - \ - PG_RETURN_INT64(result); \ -} - -/* pg_stat_get_analyze_count */ -PG_STAT_GET_RELENTRY_INT64(analyze_count) - -/* pg_stat_get_autoanalyze_count */ -PG_STAT_GET_RELENTRY_INT64(autoanalyze_count) - -/* pg_stat_get_autovacuum_count */ -PG_STAT_GET_RELENTRY_INT64(autovacuum_count) - -/* pg_stat_get_blocks_fetched */ -PG_STAT_GET_RELENTRY_INT64(blocks_fetched) +#define PG_STAT_GET_TABENTRY_INT64(stat) \ +Datum \ +CppConcat(pg_stat_get_tab_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + int64 result; \ + PgStat_StatTabEntry *tabentry; \ + \ + if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ + result = 0; \ + else \ + result = (int64) (tabentry->stat); \ + \ + PG_RETURN_INT64(result); \ +} + +/* pg_stat_get_tab_analyze_count */ +PG_STAT_GET_TABENTRY_INT64(analyze_count) + +/* pg_stat_get_tab_autoanalyze_count */ +PG_STAT_GET_TABENTRY_INT64(autoanalyze_count) + +/* pg_stat_get_tab_autovacuum_count */ +PG_STAT_GET_TABENTRY_INT64(autovacuum_count) + +/* pg_stat_get_tab_blocks_fetched */ +PG_STAT_GET_TABENTRY_INT64(blocks_fetched) + +/* pg_stat_get_tab_blocks_hit */ +PG_STAT_GET_TABENTRY_INT64(blocks_hit) -/* pg_stat_get_blocks_hit */ -PG_STAT_GET_RELENTRY_INT64(blocks_hit) +/* pg_stat_get_tab_dead_tuples */ +PG_STAT_GET_TABENTRY_INT64(dead_tuples) -/* pg_stat_get_dead_tuples */ -PG_STAT_GET_RELENTRY_INT64(dead_tuples) - -/* pg_stat_get_ins_since_vacuum */ -PG_STAT_GET_RELENTRY_INT64(ins_since_vacuum) - -/* pg_stat_get_live_tuples */ -PG_STAT_GET_RELENTRY_INT64(live_tuples) - -/* pg_stat_get_mods_since_analyze */ -PG_STAT_GET_RELENTRY_INT64(mod_since_analyze) - -/* pg_stat_get_numscans */ -PG_STAT_GET_RELENTRY_INT64(numscans) - -/* pg_stat_get_tuples_deleted */ -PG_STAT_GET_RELENTRY_INT64(tuples_deleted) - -/* pg_stat_get_tuples_fetched */ -PG_STAT_GET_RELENTRY_INT64(tuples_fetched) - -/* pg_stat_get_tuples_hot_updated */ -PG_STAT_GET_RELENTRY_INT64(tuples_hot_updated) - -/* pg_stat_get_tuples_inserted */ -PG_STAT_GET_RELENTRY_INT64(tuples_inserted) - -/* pg_stat_get_tuples_returned */ -PG_STAT_GET_RELENTRY_INT64(tuples_returned) - -/* pg_stat_get_tuples_updated */ -PG_STAT_GET_RELENTRY_INT64(tuples_updated) - -/* pg_stat_get_vacuum_count */ -PG_STAT_GET_RELENTRY_INT64(vacuum_count) - -#define PG_STAT_GET_RELENTRY_TIMESTAMPTZ(stat) \ -Datum \ -CppConcat(pg_stat_get_,stat)(PG_FUNCTION_ARGS) \ -{ \ - Oid relid = PG_GETARG_OID(0); \ - TimestampTz result; \ - PgStat_StatTabEntry *tabentry; \ - \ - if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ - result = 0; \ - else \ - result = tabentry->stat; \ - \ - if (result == 0) \ - PG_RETURN_NULL(); \ - else \ - PG_RETURN_TIMESTAMPTZ(result); \ +/* pg_stat_get_tab_ins_since_vacuum */ +PG_STAT_GET_TABENTRY_INT64(ins_since_vacuum) + +/* pg_stat_get_tab_live_tuples */ +PG_STAT_GET_TABENTRY_INT64(live_tuples) + +/* pg_stat_get_tab_mods_since_analyze */ +PG_STAT_GET_TABENTRY_INT64(mod_since_analyze) + +/* pg_stat_get_tab_numscans */ +PG_STAT_GET_TABENTRY_INT64(numscans) + +/* pg_stat_get_tab_tuples_deleted */ +PG_STAT_GET_TABENTRY_INT64(tuples_deleted) + +/* pg_stat_get_tab_tuples_fetched */ +PG_STAT_GET_TABENTRY_INT64(tuples_fetched) + +/* pg_stat_get_tab_tuples_hot_updated */ +PG_STAT_GET_TABENTRY_INT64(tuples_hot_updated) + +/* pg_stat_get_tab_tuples_inserted */ +PG_STAT_GET_TABENTRY_INT64(tuples_inserted) + +/* pg_stat_get_tab_tuples_returned */ +PG_STAT_GET_TABENTRY_INT64(tuples_returned) + +/* pg_stat_get_tab_tuples_updated */ +PG_STAT_GET_TABENTRY_INT64(tuples_updated) + +/* pg_stat_get_tab_vacuum_count */ +PG_STAT_GET_TABENTRY_INT64(vacuum_count) + +#define PG_STAT_GET_INDENTRY_INT64(stat) \ +Datum \ +CppConcat(pg_stat_get_ind_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + int64 result; \ + PgStat_StatIndEntry *indentry; \ + \ + if ((indentry = pgstat_fetch_stat_indentry(relid)) == NULL) \ + result = 0; \ + else \ + result = (int64) (indentry->stat); \ + \ + PG_RETURN_INT64(result); \ +} + +/* pg_stat_get_ind_numscans */ +PG_STAT_GET_INDENTRY_INT64(numscans) + +/* pg_stat_get_ind_tuples_returned */ +PG_STAT_GET_INDENTRY_INT64(tuples_returned) + +/* pg_stat_get_ind_tuples_fetched */ +PG_STAT_GET_INDENTRY_INT64(tuples_fetched) + +/* pg_stat_get_ind_blocks_fetched */ +PG_STAT_GET_INDENTRY_INT64(blocks_fetched) + +/* pg_stat_get_ind_blocks_hit */ +PG_STAT_GET_INDENTRY_INT64(blocks_hit) + +#define PG_STAT_GET_TABENTRY_TIMESTAMPTZ(stat) \ +Datum \ +CppConcat(pg_stat_get_tab_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + TimestampTz result; \ + PgStat_StatTabEntry *tabentry; \ + \ + if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ + result = 0; \ + else \ + result = tabentry->stat; \ + \ + if (result == 0) \ + PG_RETURN_NULL(); \ + else \ + PG_RETURN_TIMESTAMPTZ(result); \ } -/* pg_stat_get_last_analyze_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_analyze_time) +/* pg_stat_get_tab_last_analyze_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_analyze_time) -/* pg_stat_get_last_autoanalyze_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_autoanalyze_time) +/* pg_stat_get_tab_last_autoanalyze_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_autoanalyze_time) -/* pg_stat_get_last_autovacuum_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_autovacuum_time) +/* pg_stat_get_tab_last_autovacuum_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_autovacuum_time) -/* pg_stat_get_last_vacuum_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_vacuum_time) +/* pg_stat_get_tab_last_vacuum_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_vacuum_time) -/* pg_stat_get_lastscan */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(lastscan) +/* pg_stat_get_tab_lastscan */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(lastscan) + +#define PG_STAT_GET_INDENTRY_TIMESTAMPTZ(stat) \ +Datum \ +CppConcat(pg_stat_get_ind_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + TimestampTz result; \ + PgStat_StatIndEntry *indentry; \ + \ + if ((indentry = pgstat_fetch_stat_indentry(relid)) == NULL) \ + result = 0; \ + else \ + result = indentry->stat; \ + \ + if (result == 0) \ + PG_RETURN_NULL(); \ + else \ + PG_RETURN_TIMESTAMPTZ(result); \ +} + +/* pg_stat_get_ind_lastscan */ +PG_STAT_GET_INDENTRY_TIMESTAMPTZ(lastscan) Datum pg_stat_get_function_calls(PG_FUNCTION_ARGS) @@ -1496,7 +1549,7 @@ pg_stat_get_slru(PG_FUNCTION_ARGS) } Datum -pg_stat_get_xact_numscans(PG_FUNCTION_ARGS) +pg_stat_get_tab_xact_numscans(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; @@ -1510,17 +1563,32 @@ pg_stat_get_xact_numscans(PG_FUNCTION_ARGS) PG_RETURN_INT64(result); } +Datum +pg_stat_get_ind_xact_numscans(PG_FUNCTION_ARGS) +{ + Oid relid = PG_GETARG_OID(0); + int64 result; + PgStat_IndexStatus *indentry; + + if ((indentry = find_indstat_entry(relid)) == NULL) + result = 0; + else + result = (int64) (indentry->i_counts.i_numscans); + + PG_RETURN_INT64(result); +} + Datum pg_stat_get_xact_tuples_returned(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_tuples_returned); + result = (int64) (indentry->i_counts.i_tuples_returned); PG_RETURN_INT64(result); } @@ -1530,12 +1598,12 @@ pg_stat_get_xact_tuples_fetched(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_tuples_fetched); + result = (int64) (indentry->i_counts.i_tuples_fetched); PG_RETURN_INT64(result); } @@ -1623,12 +1691,12 @@ pg_stat_get_xact_blocks_fetched(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_blocks_fetched); + result = (int64) (indentry->i_counts.i_blocks_fetched); PG_RETURN_INT64(result); } @@ -1638,12 +1706,12 @@ pg_stat_get_xact_blocks_hit(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_blocks_hit); + result = (int64) (indentry->i_counts.i_blocks_hit); PG_RETURN_INT64(result); } @@ -1769,7 +1837,8 @@ pg_stat_reset_single_table_counters(PG_FUNCTION_ARGS) { Oid taboid = PG_GETARG_OID(0); - pgstat_reset(PGSTAT_KIND_RELATION, MyDatabaseId, taboid); + pgstat_reset(PGSTAT_KIND_TABLE, MyDatabaseId, taboid); + pgstat_reset(PGSTAT_KIND_INDEX, MyDatabaseId, taboid); PG_RETURN_VOID(); } diff --git a/src/backend/utils/cache/relcache.c b/src/backend/utils/cache/relcache.c index 13f7987373..d93b872653 100644 --- a/src/backend/utils/cache/relcache.c +++ b/src/backend/utils/cache/relcache.c @@ -2411,7 +2411,10 @@ RelationDestroyRelation(Relation relation, bool remember_tupdesc) RelationCloseSmgr(relation); /* break mutual link with stats entry */ - pgstat_unlink_relation(relation); + if (relation->rd_rel->relkind == RELKIND_INDEX) + pgstat_unlink_index(relation); + else + pgstat_unlink_table(relation); /* * Free all the subsidiary data structures of the relcache entry, then the @@ -2727,8 +2730,9 @@ RelationClearRelation(Relation relation, bool rebuild) SWAPFIELD(RowSecurityDesc *, rd_rsdesc); /* toast OID override must be preserved */ SWAPFIELD(Oid, rd_toastoid); - /* pgstat_info / enabled must be preserved */ - SWAPFIELD(struct PgStat_TableStatus *, pgstat_info); + /* pgstattab_info / pgstatind_info / enabled must be preserved */ + SWAPFIELD(struct PgStat_TableStatus *, pgstattab_info); + SWAPFIELD(struct PgStat_IndexStatus *, pgstatind_info); SWAPFIELD(bool, pgstat_enabled); /* preserve old partition key if we have one */ if (keep_partkey) @@ -6321,7 +6325,8 @@ load_relcache_init_file(bool shared) rel->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; rel->rd_droppedSubid = InvalidSubTransactionId; rel->rd_amcache = NULL; - rel->pgstat_info = NULL; + rel->pgstattab_info = NULL; + rel->pgstatind_info = NULL; /* * Recompute lock and physical addressing info. This is needed in diff --git a/src/include/catalog/pg_proc.dat b/src/include/catalog/pg_proc.dat index fbc4aade49..f5b2b46612 100644 --- a/src/include/catalog/pg_proc.dat +++ b/src/include/catalog/pg_proc.dat @@ -5312,96 +5312,120 @@ proargnames => '{mcv_list,index,values,nulls,frequency,base_frequency}', prosrc => 'pg_stats_ext_mcvlist_items' }, -{ oid => '1928', descr => 'statistics: number of scans done for table/index', - proname => 'pg_stat_get_numscans', provolatile => 's', proparallel => 'r', +{ oid => '1928', descr => 'statistics: number of scans done for table', + proname => 'pg_stat_get_tab_numscans', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_numscans' }, -{ oid => '9976', descr => 'statistics: time of the last scan for table/index', - proname => 'pg_stat_get_lastscan', provolatile => 's', proparallel => 'r', + prosrc => 'pg_stat_get_tab_numscans' }, +{ oid => '8296', descr => 'statistics: number of scans done for index', + proname => 'pg_stat_get_ind_numscans', provolatile => 's', proparallel => 'r', + prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_ind_numscans' }, +{ oid => '9976', descr => 'statistics: time of the last scan for table', + proname => 'pg_stat_get_tab_lastscan', provolatile => 's', proparallel => 'r', + prorettype => 'timestamptz', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_lastscan' }, +{ oid => '8626', descr => 'statistics: time of the last scan for index', + proname => 'pg_stat_get_ind_lastscan', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_lastscan' }, + prosrc => 'pg_stat_get_ind_lastscan' }, { oid => '1929', descr => 'statistics: number of tuples read by seqscan', - proname => 'pg_stat_get_tuples_returned', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_returned', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_returned' }, + prosrc => 'pg_stat_get_tab_tuples_returned' }, +{ oid => '9603', descr => 'statistics: number of tuples read by seqscan', + proname => 'pg_stat_get_ind_tuples_returned', provolatile => 's', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_ind_tuples_returned' }, { oid => '1930', descr => 'statistics: number of tuples fetched by idxscan', - proname => 'pg_stat_get_tuples_fetched', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_fetched', provolatile => 's', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_tuples_fetched' }, +{ oid => '8526', descr => 'statistics: number of tuples fetched by idxscan', + proname => 'pg_stat_get_ind_tuples_fetched', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_fetched' }, + prosrc => 'pg_stat_get_ind_tuples_fetched' }, { oid => '1931', descr => 'statistics: number of tuples inserted', - proname => 'pg_stat_get_tuples_inserted', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_inserted', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_inserted' }, + prosrc => 'pg_stat_get_tab_tuples_inserted' }, { oid => '1932', descr => 'statistics: number of tuples updated', - proname => 'pg_stat_get_tuples_updated', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_updated', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_updated' }, + prosrc => 'pg_stat_get_tab_tuples_updated' }, { oid => '1933', descr => 'statistics: number of tuples deleted', - proname => 'pg_stat_get_tuples_deleted', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_deleted', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_deleted' }, + prosrc => 'pg_stat_get_tab_tuples_deleted' }, { oid => '1972', descr => 'statistics: number of tuples hot updated', - proname => 'pg_stat_get_tuples_hot_updated', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_hot_updated', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_hot_updated' }, + prosrc => 'pg_stat_get_tab_tuples_hot_updated' }, { oid => '2878', descr => 'statistics: number of live tuples', - proname => 'pg_stat_get_live_tuples', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_live_tuples', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_live_tuples' }, + prosrc => 'pg_stat_get_tab_live_tuples' }, { oid => '2879', descr => 'statistics: number of dead tuples', - proname => 'pg_stat_get_dead_tuples', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_dead_tuples', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_dead_tuples' }, + prosrc => 'pg_stat_get_tab_dead_tuples' }, { oid => '3177', descr => 'statistics: number of tuples changed since last analyze', - proname => 'pg_stat_get_mod_since_analyze', provolatile => 's', + proname => 'pg_stat_get_tab_mod_since_analyze', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_mod_since_analyze' }, + prosrc => 'pg_stat_get_tab_mod_since_analyze' }, { oid => '5053', descr => 'statistics: number of tuples inserted since last vacuum', - proname => 'pg_stat_get_ins_since_vacuum', provolatile => 's', + proname => 'pg_stat_get_tab_ins_since_vacuum', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_ins_since_vacuum' }, + prosrc => 'pg_stat_get_tab_ins_since_vacuum' }, { oid => '1934', descr => 'statistics: number of blocks fetched', - proname => 'pg_stat_get_blocks_fetched', provolatile => 's', + proname => 'pg_stat_get_tab_blocks_fetched', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_blocks_fetched' }, + prosrc => 'pg_stat_get_tab_blocks_fetched' }, +{ oid => '9432', descr => 'statistics: number of blocks fetched', + proname => 'pg_stat_get_ind_blocks_fetched', provolatile => 's', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_ind_blocks_fetched' }, { oid => '1935', descr => 'statistics: number of blocks found in cache', - proname => 'pg_stat_get_blocks_hit', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_blocks_hit', provolatile => 's', proparallel => 'r', + prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_blocks_hit' }, +{ oid => '8354', descr => 'statistics: number of blocks found in cache', + proname => 'pg_stat_get_ind_blocks_hit', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_blocks_hit' }, + prosrc => 'pg_stat_get_ind_blocks_hit' }, { oid => '2781', descr => 'statistics: last manual vacuum time for a table', - proname => 'pg_stat_get_last_vacuum_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_vacuum_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_vacuum_time' }, + prosrc => 'pg_stat_get_tab_last_vacuum_time' }, { oid => '2782', descr => 'statistics: last auto vacuum time for a table', - proname => 'pg_stat_get_last_autovacuum_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_autovacuum_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_autovacuum_time' }, + prosrc => 'pg_stat_get_tab_last_autovacuum_time' }, { oid => '2783', descr => 'statistics: last manual analyze time for a table', - proname => 'pg_stat_get_last_analyze_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_analyze_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_analyze_time' }, + prosrc => 'pg_stat_get_tab_last_analyze_time' }, { oid => '2784', descr => 'statistics: last auto analyze time for a table', - proname => 'pg_stat_get_last_autoanalyze_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_autoanalyze_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_autoanalyze_time' }, + prosrc => 'pg_stat_get_tab_last_autoanalyze_time' }, { oid => '3054', descr => 'statistics: number of manual vacuums for a table', - proname => 'pg_stat_get_vacuum_count', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_vacuum_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_vacuum_count' }, + prosrc => 'pg_stat_get_tab_vacuum_count' }, { oid => '3055', descr => 'statistics: number of auto vacuums for a table', - proname => 'pg_stat_get_autovacuum_count', provolatile => 's', + proname => 'pg_stat_get_tab_autovacuum_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_autovacuum_count' }, + prosrc => 'pg_stat_get_tab_autovacuum_count' }, { oid => '3056', descr => 'statistics: number of manual analyzes for a table', - proname => 'pg_stat_get_analyze_count', provolatile => 's', + proname => 'pg_stat_get_tab_analyze_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_analyze_count' }, + prosrc => 'pg_stat_get_tab_analyze_count' }, { oid => '3057', descr => 'statistics: number of auto analyzes for a table', - proname => 'pg_stat_get_autoanalyze_count', provolatile => 's', + proname => 'pg_stat_get_tab_autoanalyze_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_autoanalyze_count' }, + prosrc => 'pg_stat_get_tab_autoanalyze_count' }, { oid => '1936', descr => 'statistics: currently active backend IDs', proname => 'pg_stat_get_backend_idset', prorows => '100', proretset => 't', provolatile => 's', proparallel => 'r', prorettype => 'int4', @@ -5773,10 +5797,15 @@ prosrc => 'pg_stat_get_function_self_time' }, { oid => '3037', - descr => 'statistics: number of scans done for table/index in current transaction', - proname => 'pg_stat_get_xact_numscans', provolatile => 'v', + descr => 'statistics: number of scans done for table in current transaction', + proname => 'pg_stat_get_tab_xact_numscans', provolatile => 'v', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_xact_numscans' }, +{ oid => '8892', + descr => 'statistics: number of scans done for index in current transaction', + proname => 'pg_stat_get_ind_xact_numscans', provolatile => 'v', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_xact_numscans' }, + prosrc => 'pg_stat_get_ind_xact_numscans' }, { oid => '3038', descr => 'statistics: number of tuples read by seqscan in current transaction', proname => 'pg_stat_get_xact_tuples_returned', provolatile => 'v', diff --git a/src/include/pgstat.h b/src/include/pgstat.h index 1e418b682b..4d3eb51f80 100644 --- a/src/include/pgstat.h +++ b/src/include/pgstat.h @@ -39,7 +39,8 @@ typedef enum PgStat_Kind /* stats for variable-numbered objects */ PGSTAT_KIND_DATABASE, /* database-wide statistics */ - PGSTAT_KIND_RELATION, /* per-table statistics */ + PGSTAT_KIND_TABLE, /* per-table statistics */ + PGSTAT_KIND_INDEX, /* per-index statistics */ PGSTAT_KIND_FUNCTION, /* per-function statistics */ PGSTAT_KIND_REPLSLOT, /* per-slot statistics */ PGSTAT_KIND_SUBSCRIPTION, /* per-subscription statistics */ @@ -137,6 +138,28 @@ typedef struct PgStat_BackendSubEntry PgStat_Counter sync_error_count; } PgStat_BackendSubEntry; +/* ---------- + * PgStat_IndexCounts The actual per-index counts kept by a backend + * + * This struct should contain only actual event counters, because we memcmp + * it against zeroes to detect whether there are any stats updates to apply. + * It is a component of PgStat_IndexStatus (within-backend state). + * + * tuples_returned is the number of index entries returned by + * the index AM, while tuples_fetched is the number of tuples successfully + * fetched by heap_fetch under the control of simple indexscans for this index. + * ---------- + */ +typedef struct PgStat_IndexCounts +{ + PgStat_Counter i_numscans; + + PgStat_Counter i_tuples_returned; + PgStat_Counter i_tuples_fetched; + PgStat_Counter i_blocks_fetched; + PgStat_Counter i_blocks_hit; +} PgStat_IndexCounts; + /* ---------- * PgStat_TableCounts The actual per-table counts kept by a backend * @@ -144,12 +167,9 @@ typedef struct PgStat_BackendSubEntry * it against zeroes to detect whether there are any stats updates to apply. * It is a component of PgStat_TableStatus (within-backend state). * - * Note: for a table, tuples_returned is the number of tuples successfully + * Note: tuples_returned is the number of tuples successfully * fetched by heap_getnext, while tuples_fetched is the number of tuples * successfully fetched by heap_fetch under the control of bitmap indexscans. - * For an index, tuples_returned is the number of index entries returned by - * the index AM, while tuples_fetched is the number of tuples successfully - * fetched by heap_fetch under the control of simple indexscans for this index. * * tuples_inserted/updated/deleted/hot_updated count attempted actions, * regardless of whether the transaction committed. delta_live_tuples, @@ -202,6 +222,22 @@ typedef struct PgStat_TableStatus Relation relation; /* rel that is using this entry */ } PgStat_TableStatus; +/* ---------- + * PgStat_IndexStatus Per-index status within a backend + * + * Many of the event counters are nontransactional, ie, we count events + * in committed and aborted transactions alike. For these, we just count + * directly in the PgStat_IndexStatus. + * ---------- + */ +typedef struct PgStat_IndexStatus +{ + Oid r_id; /* relation's OID */ + bool r_shared; /* is it a shared catalog? */ + PgStat_IndexCounts i_counts; /* event counts to be sent */ + Relation relation; /* rel that is using this entry */ +} PgStat_IndexStatus; + /* ---------- * PgStat_TableXactStatus Per-table, per-subtransaction status * ---------- @@ -420,6 +456,17 @@ typedef struct PgStat_StatTabEntry PgStat_Counter autoanalyze_count; } PgStat_StatTabEntry; +typedef struct PgStat_StatIndEntry +{ + PgStat_Counter numscans; + TimestampTz lastscan; + + PgStat_Counter tuples_returned; + PgStat_Counter tuples_fetched; + PgStat_Counter blocks_fetched; + PgStat_Counter blocks_hit; +} PgStat_StatIndEntry; + typedef struct PgStat_WalStats { PgStat_Counter wal_records; @@ -551,16 +598,15 @@ extern PgStat_FunctionCounts *find_funcstat_entry(Oid func_id); /* - * Functions in pgstat_relation.c + * Functions in pgstat_table.c */ -extern void pgstat_create_relation(Relation rel); -extern void pgstat_drop_relation(Relation rel); -extern void pgstat_copy_relation_stats(Relation dst, Relation src); +extern void pgstat_create_table(Relation rel); +extern void pgstat_drop_table(Relation rel); +extern void pgstat_init_table(Relation rel); -extern void pgstat_init_relation(Relation rel); -extern void pgstat_assoc_relation(Relation rel); -extern void pgstat_unlink_relation(Relation rel); +extern void pgstat_assoc_table(Relation rel); +extern void pgstat_unlink_table(Relation rel); extern void pgstat_report_vacuum(Oid tableoid, bool shared, PgStat_Counter livetuples, PgStat_Counter deadtuples); @@ -568,53 +614,83 @@ extern void pgstat_report_analyze(Relation rel, PgStat_Counter livetuples, PgStat_Counter deadtuples, bool resetcounter); +/* + * Functions in pgstat_index.c + */ + +extern void pgstat_create_index(Relation rel); +extern void pgstat_drop_index(Relation rel); +extern void pgstat_copy_index_stats(Relation dst, Relation src); +extern void pgstat_init_index(Relation rel); +extern void pgstat_assoc_index(Relation rel); +extern void pgstat_unlink_index(Relation rel); + /* * If stats are enabled, but pending data hasn't been prepared yet, call - * pgstat_assoc_relation() to do so. See its comment for why this is done - * separately from pgstat_init_relation(). + * pgstat_assoc_table() / pgstat_assoc_index() to do so. + * See their comment for why this is done separately from pgstat_init_table() + * and pgstat_init_index(). */ -#define pgstat_should_count_relation(rel) \ - (likely((rel)->pgstat_info != NULL) ? true : \ - ((rel)->pgstat_enabled ? pgstat_assoc_relation(rel), true : false)) +#define pgstat_should_count_table(rel) \ + (likely((rel)->pgstattab_info != NULL) ? true : \ + ((rel)->pgstat_enabled ? pgstat_assoc_table(rel), true : false)) + +#define pgstat_should_count_index(rel) \ + (likely((rel)->pgstatind_info != NULL) ? true : \ + ((rel)->pgstat_enabled ? pgstat_assoc_index(rel), true : false)) /* nontransactional event counts are simple enough to inline */ #define pgstat_count_heap_scan(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_numscans++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_numscans++; \ } while (0) #define pgstat_count_heap_getnext(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_tuples_returned++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_tuples_returned++; \ } while (0) #define pgstat_count_heap_fetch(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_tuples_fetched++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_tuples_fetched++; \ + } while (0) +#define pgstat_count_index_fetch(rel) \ + do { \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_tuples_fetched++; \ } while (0) #define pgstat_count_index_scan(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_numscans++; \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_numscans++; \ } while (0) #define pgstat_count_index_tuples(rel, n) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_tuples_returned += (n); \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_tuples_returned += (n); \ } while (0) -#define pgstat_count_buffer_read(rel) \ +#define pgstat_count_table_buffer_read(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_blocks_fetched++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_blocks_fetched++; \ } while (0) -#define pgstat_count_buffer_hit(rel) \ +#define pgstat_count_index_buffer_read(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_blocks_hit++; \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_blocks_fetched++; \ + } while (0) +#define pgstat_count_table_buffer_hit(rel) \ + do { \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_blocks_hit++; \ + } while (0) +#define pgstat_count_index_buffer_hit(rel) \ + do { \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_blocks_hit++; \ } while (0) - extern void pgstat_count_heap_insert(Relation rel, PgStat_Counter n); extern void pgstat_count_heap_update(Relation rel, bool hot); extern void pgstat_count_heap_delete(Relation rel); @@ -630,6 +706,10 @@ extern PgStat_StatTabEntry *pgstat_fetch_stat_tabentry(Oid relid); extern PgStat_StatTabEntry *pgstat_fetch_stat_tabentry_ext(bool shared, Oid reloid); extern PgStat_TableStatus *find_tabstat_entry(Oid rel_id); +extern PgStat_IndexStatus *find_indstat_entry(Oid rel_id); +extern PgStat_StatIndEntry *pgstat_fetch_stat_indentry(Oid relid); +extern PgStat_StatIndEntry *pgstat_fetch_stat_indentry_ext(bool shared, + Oid relid); /* diff --git a/src/include/utils/pgstat_internal.h b/src/include/utils/pgstat_internal.h index 6badb2fde4..26a780c76a 100644 --- a/src/include/utils/pgstat_internal.h +++ b/src/include/utils/pgstat_internal.h @@ -370,11 +370,17 @@ typedef struct PgStatShared_Database PgStat_StatDBEntry stats; } PgStatShared_Database; -typedef struct PgStatShared_Relation +typedef struct PgStatShared_Table { PgStatShared_Common header; PgStat_StatTabEntry stats; -} PgStatShared_Relation; +} PgStatShared_Table; + +typedef struct PgStatShared_Index +{ + PgStatShared_Common header; + PgStat_StatIndEntry stats; +} PgStatShared_Index; typedef struct PgStatShared_Function { @@ -573,16 +579,23 @@ extern void pgstat_io_snapshot_cb(void); /* - * Functions in pgstat_relation.c + * Functions in pgstat_table.c */ -extern void AtEOXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit); -extern void AtEOSubXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth); -extern void AtPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state); -extern void PostPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state); +extern void AtEOXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit); +extern void AtEOSubXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth); +extern void AtPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state); +extern void PostPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state); + +extern bool pgstat_table_flush_cb(PgStat_EntryRef *entry_ref, bool nowait); +extern void pgstat_table_delete_pending_cb(PgStat_EntryRef *entry_ref); + +/* + * Functions in pgstat_index.c + */ -extern bool pgstat_relation_flush_cb(PgStat_EntryRef *entry_ref, bool nowait); -extern void pgstat_relation_delete_pending_cb(PgStat_EntryRef *entry_ref); +extern bool pgstat_index_flush_cb(PgStat_EntryRef *entry_ref, bool nowait); +extern void pgstat_index_delete_pending_cb(PgStat_EntryRef *entry_ref); /* diff --git a/src/include/utils/rel.h b/src/include/utils/rel.h index 67f994cb3e..7970011b83 100644 --- a/src/include/utils/rel.h +++ b/src/include/utils/rel.h @@ -248,7 +248,10 @@ typedef struct RelationData bool pgstat_enabled; /* should relation stats be counted */ /* use "struct" here to avoid needing to include pgstat.h: */ - struct PgStat_TableStatus *pgstat_info; /* statistics collection area */ + /* table's statistics collection area */ + struct PgStat_TableStatus *pgstattab_info; + /* Index's statistics collection area */ + struct PgStat_IndexStatus *pgstatind_info; } RelationData; diff --git a/src/test/isolation/expected/stats.out b/src/test/isolation/expected/stats.out index 61b5a710ec..494adee88b 100644 --- a/src/test/isolation/expected/stats.out +++ b/src/test/isolation/expected/stats.out @@ -2166,14 +2166,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2210,14 +2210,14 @@ step s2_table_update_k1: UPDATE test_stat_tab SET value = value + 1 WHERE key = step s1_table_drop: DROP TABLE test_stat_tab; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2236,14 +2236,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2275,14 +2275,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2314,14 +2314,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2369,14 +2369,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2401,14 +2401,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2463,14 +2463,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2495,14 +2495,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2558,14 +2558,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2627,14 +2627,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2688,14 +2688,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2755,14 +2755,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2795,14 +2795,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2841,14 +2841,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2881,14 +2881,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2927,14 +2927,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2968,14 +2968,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -3015,14 +3015,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' diff --git a/src/test/isolation/expected/stats_1.out b/src/test/isolation/expected/stats_1.out index 3854320106..7981747732 100644 --- a/src/test/isolation/expected/stats_1.out +++ b/src/test/isolation/expected/stats_1.out @@ -2174,14 +2174,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2218,14 +2218,14 @@ step s2_table_update_k1: UPDATE test_stat_tab SET value = value + 1 WHERE key = step s1_table_drop: DROP TABLE test_stat_tab; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2244,14 +2244,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2283,14 +2283,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2322,14 +2322,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2377,14 +2377,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2409,14 +2409,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2471,14 +2471,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2503,14 +2503,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2566,14 +2566,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2635,14 +2635,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2698,14 +2698,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2767,14 +2767,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2809,14 +2809,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2857,14 +2857,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2899,14 +2899,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2947,14 +2947,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2990,14 +2990,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -3039,14 +3039,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' diff --git a/src/test/isolation/specs/stats.spec b/src/test/isolation/specs/stats.spec index 5b922d788c..53d78f7db1 100644 --- a/src/test/isolation/specs/stats.spec +++ b/src/test/isolation/specs/stats.spec @@ -93,14 +93,14 @@ step s1_table_drop { DROP TABLE test_stat_tab; } step s1_table_stats { SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' } diff --git a/src/test/recovery/t/029_stats_restart.pl b/src/test/recovery/t/029_stats_restart.pl index 83d6647d32..8b0b597419 100644 --- a/src/test/recovery/t/029_stats_restart.pl +++ b/src/test/recovery/t/029_stats_restart.pl @@ -43,8 +43,8 @@ my $sect = "initial"; is(have_stats('database', $dboid, 0), 't', "$sect: db stats do exist"); is(have_stats('function', $dboid, $funcoid), 't', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 't', "$sect: relation stats do exist"); +is(have_stats('table', $dboid, $tableoid), + 't', "$sect: table stats do exist"); # regular shutdown $node->stop(); @@ -67,8 +67,8 @@ $sect = "copy"; is(have_stats('database', $dboid, 0), 't', "$sect: db stats do exist"); is(have_stats('function', $dboid, $funcoid), 't', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 't', "$sect: relation stats do exist"); +is(have_stats('table', $dboid, $tableoid), + 't', "$sect: table stats do exist"); $node->stop('immediate'); @@ -84,8 +84,8 @@ $sect = "post immediate"; is(have_stats('database', $dboid, 0), 'f', "$sect: db stats do not exist"); is(have_stats('function', $dboid, $funcoid), 'f', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 'f', "$sect: relation stats do not exist"); +is(have_stats('table', $dboid, $tableoid), + 'f', "$sect: table stats do not exist"); # get rid of backup statsfile unlink $statsfile or die "cannot unlink $statsfile $!"; @@ -98,8 +98,8 @@ $sect = "post immediate, new"; is(have_stats('database', $dboid, 0), 't', "$sect: db stats do exist"); is(have_stats('function', $dboid, $funcoid), 't', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 't', "$sect: relation stats do exist"); +is(have_stats('table', $dboid, $tableoid), + 't', "$sect: table stats do exist"); # regular shutdown $node->stop(); @@ -117,8 +117,7 @@ $sect = "invalid_overwrite"; is(have_stats('database', $dboid, 0), 'f', "$sect: db stats do not exist"); is(have_stats('function', $dboid, $funcoid), 'f', "$sect: function stats do not exist"); -is(have_stats('relation', $dboid, $tableoid), - 'f', "$sect: relation stats do not exist"); +is(have_stats('table', $dboid, $tableoid), 'f', "$sect: table do not exist"); ## check invalid stats file starting with valid contents, but followed by @@ -133,8 +132,8 @@ $sect = "invalid_append"; is(have_stats('database', $dboid, 0), 'f', "$sect: db stats do not exist"); is(have_stats('function', $dboid, $funcoid), 'f', "$sect: function stats do not exist"); -is(have_stats('relation', $dboid, $tableoid), - 'f', "$sect: relation stats do not exist"); +is(have_stats('table', $dboid, $tableoid), + 'f', "$sect: table stats do not exist"); ## checks related to stats persistency around restarts and resets diff --git a/src/test/recovery/t/030_stats_cleanup_replica.pl b/src/test/recovery/t/030_stats_cleanup_replica.pl index 51495aebcd..042ae55f17 100644 --- a/src/test/recovery/t/030_stats_cleanup_replica.pl +++ b/src/test/recovery/t/030_stats_cleanup_replica.pl @@ -179,7 +179,7 @@ sub test_standby_func_tab_stats_status my %stats; $stats{rel} = $node_standby->safe_psql($connect_db, - "SELECT pg_stat_have_stats('relation', $dboid, $tableoid)"); + "SELECT pg_stat_have_stats('table', $dboid, $tableoid)"); $stats{func} = $node_standby->safe_psql($connect_db, "SELECT pg_stat_have_stats('function', $dboid, $funcoid)"); diff --git a/src/test/regress/expected/rules.out b/src/test/regress/expected/rules.out index e953d1f515..5d6219fb51 100644 --- a/src/test/regress/expected/rules.out +++ b/src/test/regress/expected/rules.out @@ -1767,10 +1767,10 @@ pg_stat_all_indexes| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, i.relname AS indexrelname, - pg_stat_get_numscans(i.oid) AS idx_scan, - pg_stat_get_lastscan(i.oid) AS last_idx_scan, - pg_stat_get_tuples_returned(i.oid) AS idx_tup_read, - pg_stat_get_tuples_fetched(i.oid) AS idx_tup_fetch + pg_stat_get_ind_numscans(i.oid) AS idx_scan, + pg_stat_get_ind_lastscan(i.oid) AS last_idx_scan, + pg_stat_get_ind_tuples_returned(i.oid) AS idx_tup_read, + pg_stat_get_ind_tuples_fetched(i.oid) AS idx_tup_fetch FROM (((pg_class c JOIN pg_index x ON ((c.oid = x.indrelid))) JOIN pg_class i ON ((i.oid = x.indexrelid))) @@ -1779,28 +1779,28 @@ pg_stat_all_indexes| SELECT c.oid AS relid, pg_stat_all_tables| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - pg_stat_get_numscans(c.oid) AS seq_scan, - pg_stat_get_lastscan(c.oid) AS last_seq_scan, - pg_stat_get_tuples_returned(c.oid) AS seq_tup_read, - (sum(pg_stat_get_numscans(i.indexrelid)))::bigint AS idx_scan, - max(pg_stat_get_lastscan(i.indexrelid)) AS last_idx_scan, - ((sum(pg_stat_get_tuples_fetched(i.indexrelid)))::bigint + pg_stat_get_tuples_fetched(c.oid)) AS idx_tup_fetch, - pg_stat_get_tuples_inserted(c.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(c.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(c.oid) AS n_tup_del, - pg_stat_get_tuples_hot_updated(c.oid) AS n_tup_hot_upd, - pg_stat_get_live_tuples(c.oid) AS n_live_tup, - pg_stat_get_dead_tuples(c.oid) AS n_dead_tup, - pg_stat_get_mod_since_analyze(c.oid) AS n_mod_since_analyze, - pg_stat_get_ins_since_vacuum(c.oid) AS n_ins_since_vacuum, - pg_stat_get_last_vacuum_time(c.oid) AS last_vacuum, - pg_stat_get_last_autovacuum_time(c.oid) AS last_autovacuum, - pg_stat_get_last_analyze_time(c.oid) AS last_analyze, - pg_stat_get_last_autoanalyze_time(c.oid) AS last_autoanalyze, - pg_stat_get_vacuum_count(c.oid) AS vacuum_count, - pg_stat_get_autovacuum_count(c.oid) AS autovacuum_count, - pg_stat_get_analyze_count(c.oid) AS analyze_count, - pg_stat_get_autoanalyze_count(c.oid) AS autoanalyze_count + pg_stat_get_tab_numscans(c.oid) AS seq_scan, + pg_stat_get_tab_lastscan(c.oid) AS last_seq_scan, + pg_stat_get_tab_tuples_returned(c.oid) AS seq_tup_read, + (sum(pg_stat_get_ind_numscans(i.indexrelid)))::bigint AS idx_scan, + max(pg_stat_get_ind_lastscan(i.indexrelid)) AS last_idx_scan, + ((sum(pg_stat_get_ind_tuples_fetched(i.indexrelid)))::bigint + pg_stat_get_tab_tuples_fetched(c.oid)) AS idx_tup_fetch, + pg_stat_get_tab_tuples_inserted(c.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(c.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(c.oid) AS n_tup_del, + pg_stat_get_tab_tuples_hot_updated(c.oid) AS n_tup_hot_upd, + pg_stat_get_tab_live_tuples(c.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(c.oid) AS n_dead_tup, + pg_stat_get_tab_mod_since_analyze(c.oid) AS n_mod_since_analyze, + pg_stat_get_tab_ins_since_vacuum(c.oid) AS n_ins_since_vacuum, + pg_stat_get_tab_last_vacuum_time(c.oid) AS last_vacuum, + pg_stat_get_tab_last_autovacuum_time(c.oid) AS last_autovacuum, + pg_stat_get_tab_last_analyze_time(c.oid) AS last_analyze, + pg_stat_get_tab_last_autoanalyze_time(c.oid) AS last_autoanalyze, + pg_stat_get_tab_vacuum_count(c.oid) AS vacuum_count, + pg_stat_get_tab_autovacuum_count(c.oid) AS autovacuum_count, + pg_stat_get_tab_analyze_count(c.oid) AS analyze_count, + pg_stat_get_tab_autoanalyze_count(c.oid) AS autoanalyze_count FROM ((pg_class c LEFT JOIN pg_index i ON ((c.oid = i.indrelid))) LEFT JOIN pg_namespace n ON ((n.oid = c.relnamespace))) @@ -2237,9 +2237,9 @@ pg_stat_wal_receiver| SELECT pid, pg_stat_xact_all_tables| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - pg_stat_get_xact_numscans(c.oid) AS seq_scan, + pg_stat_get_tab_xact_numscans(c.oid) AS seq_scan, pg_stat_get_xact_tuples_returned(c.oid) AS seq_tup_read, - (sum(pg_stat_get_xact_numscans(i.indexrelid)))::bigint AS idx_scan, + (sum(pg_stat_get_ind_xact_numscans(i.indexrelid)))::bigint AS idx_scan, ((sum(pg_stat_get_xact_tuples_fetched(i.indexrelid)))::bigint + pg_stat_get_xact_tuples_fetched(c.oid)) AS idx_tup_fetch, pg_stat_get_xact_tuples_inserted(c.oid) AS n_tup_ins, pg_stat_get_xact_tuples_updated(c.oid) AS n_tup_upd, @@ -2290,8 +2290,8 @@ pg_statio_all_indexes| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, i.relname AS indexrelname, - (pg_stat_get_blocks_fetched(i.oid) - pg_stat_get_blocks_hit(i.oid)) AS idx_blks_read, - pg_stat_get_blocks_hit(i.oid) AS idx_blks_hit + (pg_stat_get_ind_blocks_fetched(i.oid) - pg_stat_get_ind_blocks_hit(i.oid)) AS idx_blks_read, + pg_stat_get_ind_blocks_hit(i.oid) AS idx_blks_hit FROM (((pg_class c JOIN pg_index x ON ((c.oid = x.indrelid))) JOIN pg_class i ON ((i.oid = x.indexrelid))) @@ -2300,31 +2300,31 @@ pg_statio_all_indexes| SELECT c.oid AS relid, pg_statio_all_sequences| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - (pg_stat_get_blocks_fetched(c.oid) - pg_stat_get_blocks_hit(c.oid)) AS blks_read, - pg_stat_get_blocks_hit(c.oid) AS blks_hit + (pg_stat_get_ind_blocks_fetched(c.oid) - pg_stat_get_tab_blocks_hit(c.oid)) AS blks_read, + pg_stat_get_tab_blocks_hit(c.oid) AS blks_hit FROM (pg_class c LEFT JOIN pg_namespace n ON ((n.oid = c.relnamespace))) WHERE (c.relkind = 'S'::"char"); pg_statio_all_tables| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - (pg_stat_get_blocks_fetched(c.oid) - pg_stat_get_blocks_hit(c.oid)) AS heap_blks_read, - pg_stat_get_blocks_hit(c.oid) AS heap_blks_hit, + (pg_stat_get_tab_blocks_fetched(c.oid) - pg_stat_get_tab_blocks_hit(c.oid)) AS heap_blks_read, + pg_stat_get_tab_blocks_hit(c.oid) AS heap_blks_hit, i.idx_blks_read, i.idx_blks_hit, - (pg_stat_get_blocks_fetched(t.oid) - pg_stat_get_blocks_hit(t.oid)) AS toast_blks_read, - pg_stat_get_blocks_hit(t.oid) AS toast_blks_hit, + (pg_stat_get_tab_blocks_fetched(t.oid) - pg_stat_get_tab_blocks_hit(t.oid)) AS toast_blks_read, + pg_stat_get_tab_blocks_hit(t.oid) AS toast_blks_hit, x.idx_blks_read AS tidx_blks_read, x.idx_blks_hit AS tidx_blks_hit FROM ((((pg_class c LEFT JOIN pg_class t ON ((c.reltoastrelid = t.oid))) LEFT JOIN pg_namespace n ON ((n.oid = c.relnamespace))) - LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_blocks_fetched(pg_index.indexrelid) - pg_stat_get_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, - (sum(pg_stat_get_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit + LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_ind_blocks_fetched(pg_index.indexrelid) - pg_stat_get_ind_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, + (sum(pg_stat_get_ind_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit FROM pg_index WHERE (pg_index.indrelid = c.oid)) i ON (true)) - LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_blocks_fetched(pg_index.indexrelid) - pg_stat_get_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, - (sum(pg_stat_get_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit + LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_ind_blocks_fetched(pg_index.indexrelid) - pg_stat_get_ind_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, + (sum(pg_stat_get_ind_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit FROM pg_index WHERE (pg_index.indrelid = t.oid)) x ON (true)) WHERE (c.relkind = ANY (ARRAY['r'::"char", 't'::"char", 'm'::"char"])); diff --git a/src/test/regress/expected/stats.out b/src/test/regress/expected/stats.out index 186c296299..a821192004 100644 --- a/src/test/regress/expected/stats.out +++ b/src/test/regress/expected/stats.out @@ -151,6 +151,117 @@ FROM prevstats AS pr; COMMIT; ---- +-- Basic tests for toast +--- +CREATE TABLE stats_toast(stuff text); +ALTER TABLE stats_toast ALTER COLUMN stuff SET STORAGE EXTERNAL; +INSERT INTO stats_toast VALUES (repeat('a',1000000)); +SELECT count(*) FROM stats_toast WHERE stuff like '%a%'; + count +------- + 1 +(1 row) + +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + pg_stat_force_next_flush +-------------------------- + +(1 row) + +select toast_blks_read > 0 as toast_blks_read, toast_blks_hit > 0 as toast_blks_hit, + tidx_blks_read > 0 as tidx_blks_read, tidx_blks_hit > 0 as tidx_blks_hit, + toast_blks_hit >= toast_blks_read, + tidx_blks_hit >= tidx_blks_read + from pg_statio_all_tables + where relname = 'stats_toast'; + toast_blks_read | toast_blks_hit | tidx_blks_read | tidx_blks_hit | ?column? | ?column? +-----------------+----------------+----------------+---------------+----------+---------- + t | t | t | t | t | t +(1 row) + +---- +-- Basic tests for partition +--- +CREATE TABLE stats_partition ( + id1 int not null, + id2 int not null +) PARTITION BY RANGE (id2); +CREATE TABLE stats_partition_5 PARTITION OF stats_partition + FOR VALUES FROM (0) TO (5); +CREATE TABLE stats_partition_20000 PARTITION OF stats_partition + FOR VALUES FROM (5) TO (20001); +CREATE INDEX ON stats_partition (id2); +insert into stats_partition select a,a from generate_series(0,20000) a; +SET enable_seqscan TO off; +SET enable_bitmapscan TO off; +select * from stats_partition where id2 = 2000; + id1 | id2 +------+------ + 2000 | 2000 +(1 row) + +select * from stats_partition where id2 = 2; + id1 | id2 +-----+----- + 2 | 2 +(1 row) + +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + pg_stat_force_next_flush +-------------------------- + +(1 row) + +select relname, indexrelname, idx_scan > 0 as idx_scan, idx_tup_read > 0 as idx_tup_read, + idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | indexrelname | idx_scan | idx_tup_read | idx_tup_fetch +-----------------------+-------------------------------+----------+--------------+--------------- + stats_partition_20000 | stats_partition_20000_id2_idx | t | t | t + stats_partition_5 | stats_partition_5_id2_idx | t | t | t +(2 rows) + +select relname, indexrelname, idx_blks_read > 0 as idx_blks_read, + idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | indexrelname | idx_blks_read | idx_blks_hit +-----------------------+-------------------------------+---------------+-------------- + stats_partition_20000 | stats_partition_20000_id2_idx | t | t + stats_partition_5 | stats_partition_5_id2_idx | t | t +(2 rows) + +select relname,seq_scan > 0 as seq_scan, seq_tup_read > 0 as seq_tup_read, + idx_scan > 0 as idx_scan, idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | seq_scan | seq_tup_read | idx_scan | idx_tup_fetch +-----------------------+----------+--------------+----------+--------------- + stats_partition | f | f | f | f + stats_partition_20000 | t | f | t | t + stats_partition_5 | t | f | t | t +(3 rows) + +select relname, heap_blks_read > 0 as heap_blks_read, heap_blks_hit > 0 as heap_blks_hit, + idx_blks_read > 0 as idx_blks_read, idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | heap_blks_read | heap_blks_hit | idx_blks_read | idx_blks_hit +-----------------------+----------------+---------------+---------------+-------------- + stats_partition_20000 | t | t | t | t + stats_partition_5 | t | t | t | t +(2 rows) + +SET enable_seqscan TO on; +SET enable_bitmapscan TO on; +---- -- Basic tests for track_functions --- CREATE FUNCTION stats_test_func1() RETURNS VOID LANGUAGE plpgsql AS $$BEGIN END;$$; @@ -357,17 +468,17 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) DROP TABLE drop_stats_test; -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); - pg_stat_get_live_tuples -------------------------- - 0 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 0 (1 row) SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_oid); @@ -378,18 +489,18 @@ SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_oid); -- check that rollback protects against having stats dropped and that local -- modifications don't pose a problem -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 1 -(1 row) - -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples ----------------------------- 1 (1 row) +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 1 +(1 row) + SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); pg_stat_get_xact_tuples_inserted ---------------------------------- @@ -418,29 +529,29 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted ------------------------------ - 2 +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 2 (1 row) -- transactional drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted ------------------------------ - 2 +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 2 (1 row) BEGIN; @@ -465,23 +576,23 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 0 -(1 row) - -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples ----------------------------- 0 (1 row) +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 0 +(1 row) + -- savepoint rollback (2 levels) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) BEGIN; @@ -510,17 +621,17 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) -- savepoint rolback (1 level) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) BEGIN; @@ -529,17 +640,17 @@ DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; ROLLBACK TO SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) -- and now actually drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) BEGIN; @@ -548,10 +659,10 @@ DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; RELEASE SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 0 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 0 (1 row) DROP TABLE trunc_stats_test, trunc_stats_test1, trunc_stats_test2, trunc_stats_test3, trunc_stats_test4; @@ -1021,21 +1132,21 @@ select a from stats_test_tab1 where a = 3; 3 (1 row) -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t (1 row) -- pg_stat_have_stats returns false for dropped index with stats -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t (1 row) DROP index stats_test_idx1; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- f @@ -1051,14 +1162,14 @@ select a from stats_test_tab1 where a = 3; 3 (1 row) -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t (1 row) ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- f @@ -1073,7 +1184,7 @@ select a from stats_test_tab1 where a = 3; 3 (1 row) -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t @@ -1081,7 +1192,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); REINDEX index CONCURRENTLY stats_test_idx1; -- false for previous oid -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- f @@ -1089,7 +1200,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); -- true for new oid SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t @@ -1097,7 +1208,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns true for a rolled back drop index with stats BEGIN; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t @@ -1105,7 +1216,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); DROP index stats_test_idx1; ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t diff --git a/src/test/regress/sql/stats.sql b/src/test/regress/sql/stats.sql index d7f873cfc9..a97bc6fe09 100644 --- a/src/test/regress/sql/stats.sql +++ b/src/test/regress/sql/stats.sql @@ -126,6 +126,77 @@ FROM prevstats AS pr; COMMIT; +---- +-- Basic tests for toast +--- +CREATE TABLE stats_toast(stuff text); +ALTER TABLE stats_toast ALTER COLUMN stuff SET STORAGE EXTERNAL; +INSERT INTO stats_toast VALUES (repeat('a',1000000)); +SELECT count(*) FROM stats_toast WHERE stuff like '%a%'; + +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + +select toast_blks_read > 0 as toast_blks_read, toast_blks_hit > 0 as toast_blks_hit, + tidx_blks_read > 0 as tidx_blks_read, tidx_blks_hit > 0 as tidx_blks_hit, + toast_blks_hit >= toast_blks_read, + tidx_blks_hit >= tidx_blks_read + from pg_statio_all_tables + where relname = 'stats_toast'; + +---- +-- Basic tests for partition +--- +CREATE TABLE stats_partition ( + id1 int not null, + id2 int not null +) PARTITION BY RANGE (id2); + +CREATE TABLE stats_partition_5 PARTITION OF stats_partition + FOR VALUES FROM (0) TO (5); + +CREATE TABLE stats_partition_20000 PARTITION OF stats_partition + FOR VALUES FROM (5) TO (20001); + +CREATE INDEX ON stats_partition (id2); + +insert into stats_partition select a,a from generate_series(0,20000) a; + +SET enable_seqscan TO off; +SET enable_bitmapscan TO off; + +select * from stats_partition where id2 = 2000; +select * from stats_partition where id2 = 2; +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + +select relname, indexrelname, idx_scan > 0 as idx_scan, idx_tup_read > 0 as idx_tup_read, + idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +select relname, indexrelname, idx_blks_read > 0 as idx_blks_read, + idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +select relname,seq_scan > 0 as seq_scan, seq_tup_read > 0 as seq_tup_read, + idx_scan > 0 as idx_scan, idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +select relname, heap_blks_read > 0 as heap_blks_read, heap_blks_hit > 0 as heap_blks_hit, + idx_blks_read > 0 as idx_blks_read, idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +SET enable_seqscan TO on; +SET enable_bitmapscan TO on; + ---- -- Basic tests for track_functions --- @@ -218,15 +289,15 @@ SELECT 'drop_stats_test_subxact'::regclass::oid AS drop_stats_test_subxact_oid \ SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); DROP TABLE drop_stats_test; -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_oid); -- check that rollback protects against having stats dropped and that local -- modifications don't pose a problem -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); BEGIN; INSERT INTO drop_stats_test_xact DEFAULT VALUES; @@ -235,12 +306,12 @@ DROP TABLE drop_stats_test_xact; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); ROLLBACK; SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); -- transactional drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); BEGIN; INSERT INTO drop_stats_test_xact DEFAULT VALUES; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); @@ -248,11 +319,11 @@ DROP TABLE drop_stats_test_xact; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); COMMIT; SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); -- savepoint rollback (2 levels) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); BEGIN; INSERT INTO drop_stats_test_subxact DEFAULT VALUES; SAVEPOINT sp1; @@ -264,27 +335,27 @@ ROLLBACK TO SAVEPOINT sp2; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_subxact_oid); COMMIT; SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); -- savepoint rolback (1 level) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); BEGIN; SAVEPOINT sp1; DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; ROLLBACK TO SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); -- and now actually drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); BEGIN; SAVEPOINT sp1; DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; RELEASE SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); DROP TABLE trunc_stats_test, trunc_stats_test1, trunc_stats_test2, trunc_stats_test3, trunc_stats_test4; DROP TABLE prevstats; @@ -493,40 +564,40 @@ CREATE index stats_test_idx1 on stats_test_tab1(a); SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset SET enable_seqscan TO off; select a from stats_test_tab1 where a = 3; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns false for dropped index with stats -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); DROP index stats_test_idx1; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns false for rolled back index creation BEGIN; CREATE index stats_test_idx1 on stats_test_tab1(a); SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset select a from stats_test_tab1 where a = 3; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns true for reindex CONCURRENTLY CREATE index stats_test_idx1 on stats_test_tab1(a); SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset select a from stats_test_tab1 where a = 3; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); REINDEX index CONCURRENTLY stats_test_idx1; -- false for previous oid -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- true for new oid SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns true for a rolled back drop index with stats BEGIN; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); DROP index stats_test_idx1; ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- put enable_seqscan back to on SET enable_seqscan TO on; diff --git a/src/tools/pgindent/typedefs.list b/src/tools/pgindent/typedefs.list index 097f42e1b3..6cebdb026a 100644 --- a/src/tools/pgindent/typedefs.list +++ b/src/tools/pgindent/typedefs.list @@ -2026,10 +2026,11 @@ PgStatShared_Database PgStatShared_Function PgStatShared_HashEntry PgStatShared_IO -PgStatShared_Relation +PgStatShared_Index PgStatShared_ReplSlot PgStatShared_SLRU PgStatShared_Subscription +PgStatShared_Table PgStatShared_Wal PgStat_ArchiverStats PgStat_BackendSubEntry @@ -2043,6 +2044,7 @@ PgStat_FetchConsistency PgStat_FunctionCallUsage PgStat_FunctionCounts PgStat_HashKey +PgStat_IndexStatus PgStat_IO PgStat_Kind PgStat_KindInfo Attachments: [text/plain] v10-0001-split_tables_indexes_stats.patch (159.9K, ../../[email protected]/2-v10-0001-split_tables_indexes_stats.patch) download | inline diff: diff --git a/src/backend/access/common/relation.c b/src/backend/access/common/relation.c index 4017e175e3..fca166a063 100644 --- a/src/backend/access/common/relation.c +++ b/src/backend/access/common/relation.c @@ -73,7 +73,10 @@ relation_open(Oid relationId, LOCKMODE lockmode) if (RelationUsesLocalBuffers(r)) MyXactFlags |= XACT_FLAGS_ACCESSEDTEMPNAMESPACE; - pgstat_init_relation(r); + if (r->rd_rel->relkind == RELKIND_INDEX) + pgstat_init_index(r); + else + pgstat_init_table(r); return r; } @@ -123,7 +126,10 @@ try_relation_open(Oid relationId, LOCKMODE lockmode) if (RelationUsesLocalBuffers(r)) MyXactFlags |= XACT_FLAGS_ACCESSEDTEMPNAMESPACE; - pgstat_init_relation(r); + if (r->rd_rel->relkind == RELKIND_INDEX) + pgstat_init_index(r); + else + pgstat_init_table(r); return r; } diff --git a/src/backend/access/index/indexam.c b/src/backend/access/index/indexam.c index dbf147ed22..5b83146eef 100644 --- a/src/backend/access/index/indexam.c +++ b/src/backend/access/index/indexam.c @@ -590,7 +590,7 @@ index_fetch_heap(IndexScanDesc scan, TupleTableSlot *slot) &scan->xs_heap_continue, &all_dead); if (found) - pgstat_count_heap_fetch(scan->indexRelation); + pgstat_count_index_fetch(scan->indexRelation); /* * If we scanned a whole HOT chain and found only dead tuples, tell index diff --git a/src/backend/catalog/heap.c b/src/backend/catalog/heap.c index 4f006820b8..4e9569c901 100644 --- a/src/backend/catalog/heap.c +++ b/src/backend/catalog/heap.c @@ -404,7 +404,10 @@ heap_create(const char *relname, reltablespace); /* ensure that stats are dropped if transaction aborts */ - pgstat_create_relation(rel); + if (rel->rd_rel->relkind == RELKIND_INDEX) + pgstat_create_index(rel); + else + pgstat_create_table(rel); return rel; } @@ -1853,7 +1856,7 @@ heap_drop_with_catalog(Oid relid) RelationDropStorage(rel); /* ensure that stats are dropped if transaction commits */ - pgstat_drop_relation(rel); + pgstat_drop_table(rel); /* * Close relcache entry, but *keep* AccessExclusiveLock on the relation diff --git a/src/backend/catalog/index.c b/src/backend/catalog/index.c index 7777e7ec77..cb602484e7 100644 --- a/src/backend/catalog/index.c +++ b/src/backend/catalog/index.c @@ -1765,7 +1765,7 @@ index_concurrently_swap(Oid newIndexId, Oid oldIndexId, const char *oldName) changeDependenciesOn(RelationRelationId, oldIndexId, newIndexId); /* copy over statistics from old to new index */ - pgstat_copy_relation_stats(newClassRel, oldClassRel); + pgstat_copy_index_stats(newClassRel, oldClassRel); /* Copy data of pg_statistic from the old index to the new one */ CopyStatistics(oldIndexId, newIndexId); @@ -2339,7 +2339,7 @@ index_drop(Oid indexId, bool concurrent, bool concurrent_lock_mode) RelationDropStorage(userIndexRelation); /* ensure that stats are dropped if transaction commits */ - pgstat_drop_relation(userIndexRelation); + pgstat_drop_index(userIndexRelation); /* * Close and flush the index's relcache entry, to ensure relcache doesn't diff --git a/src/backend/catalog/system_views.sql b/src/backend/catalog/system_views.sql index 34ca0e739f..5a0fe0d99a 100644 --- a/src/backend/catalog/system_views.sql +++ b/src/backend/catalog/system_views.sql @@ -654,29 +654,29 @@ CREATE VIEW pg_stat_all_tables AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_numscans(C.oid) AS seq_scan, - pg_stat_get_lastscan(C.oid) AS last_seq_scan, - pg_stat_get_tuples_returned(C.oid) AS seq_tup_read, - sum(pg_stat_get_numscans(I.indexrelid))::bigint AS idx_scan, - max(pg_stat_get_lastscan(I.indexrelid)) AS last_idx_scan, - sum(pg_stat_get_tuples_fetched(I.indexrelid))::bigint + - pg_stat_get_tuples_fetched(C.oid) AS idx_tup_fetch, - pg_stat_get_tuples_inserted(C.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(C.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(C.oid) AS n_tup_del, - pg_stat_get_tuples_hot_updated(C.oid) AS n_tup_hot_upd, - pg_stat_get_live_tuples(C.oid) AS n_live_tup, - pg_stat_get_dead_tuples(C.oid) AS n_dead_tup, - pg_stat_get_mod_since_analyze(C.oid) AS n_mod_since_analyze, - pg_stat_get_ins_since_vacuum(C.oid) AS n_ins_since_vacuum, - pg_stat_get_last_vacuum_time(C.oid) as last_vacuum, - pg_stat_get_last_autovacuum_time(C.oid) as last_autovacuum, - pg_stat_get_last_analyze_time(C.oid) as last_analyze, - pg_stat_get_last_autoanalyze_time(C.oid) as last_autoanalyze, - pg_stat_get_vacuum_count(C.oid) AS vacuum_count, - pg_stat_get_autovacuum_count(C.oid) AS autovacuum_count, - pg_stat_get_analyze_count(C.oid) AS analyze_count, - pg_stat_get_autoanalyze_count(C.oid) AS autoanalyze_count + pg_stat_get_tab_numscans(C.oid) AS seq_scan, + pg_stat_get_tab_lastscan(C.oid) AS last_seq_scan, + pg_stat_get_tab_tuples_returned(C.oid) AS seq_tup_read, + sum(pg_stat_get_ind_numscans(I.indexrelid))::bigint AS idx_scan, + max(pg_stat_get_ind_lastscan(I.indexrelid)) AS last_idx_scan, + sum(pg_stat_get_ind_tuples_fetched(I.indexrelid))::bigint + + pg_stat_get_tab_tuples_fetched(C.oid) AS idx_tup_fetch, + pg_stat_get_tab_tuples_inserted(C.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(C.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(C.oid) AS n_tup_del, + pg_stat_get_tab_tuples_hot_updated(C.oid) AS n_tup_hot_upd, + pg_stat_get_tab_live_tuples(C.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(C.oid) AS n_dead_tup, + pg_stat_get_tab_mod_since_analyze(C.oid) AS n_mod_since_analyze, + pg_stat_get_tab_ins_since_vacuum(C.oid) AS n_ins_since_vacuum, + pg_stat_get_tab_last_vacuum_time(C.oid) as last_vacuum, + pg_stat_get_tab_last_autovacuum_time(C.oid) as last_autovacuum, + pg_stat_get_tab_last_analyze_time(C.oid) as last_analyze, + pg_stat_get_tab_last_autoanalyze_time(C.oid) as last_autoanalyze, + pg_stat_get_tab_vacuum_count(C.oid) AS vacuum_count, + pg_stat_get_tab_autovacuum_count(C.oid) AS autovacuum_count, + pg_stat_get_tab_analyze_count(C.oid) AS analyze_count, + pg_stat_get_tab_autoanalyze_count(C.oid) AS autoanalyze_count FROM pg_class C LEFT JOIN pg_index I ON C.oid = I.indrelid LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace) @@ -688,9 +688,9 @@ CREATE VIEW pg_stat_xact_all_tables AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_xact_numscans(C.oid) AS seq_scan, + pg_stat_get_tab_xact_numscans(C.oid) AS seq_scan, pg_stat_get_xact_tuples_returned(C.oid) AS seq_tup_read, - sum(pg_stat_get_xact_numscans(I.indexrelid))::bigint AS idx_scan, + sum(pg_stat_get_ind_xact_numscans(I.indexrelid))::bigint AS idx_scan, sum(pg_stat_get_xact_tuples_fetched(I.indexrelid))::bigint + pg_stat_get_xact_tuples_fetched(C.oid) AS idx_tup_fetch, pg_stat_get_xact_tuples_inserted(C.oid) AS n_tup_ins, @@ -728,31 +728,31 @@ CREATE VIEW pg_statio_all_tables AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_blocks_fetched(C.oid) - - pg_stat_get_blocks_hit(C.oid) AS heap_blks_read, - pg_stat_get_blocks_hit(C.oid) AS heap_blks_hit, + pg_stat_get_tab_blocks_fetched(C.oid) - + pg_stat_get_tab_blocks_hit(C.oid) AS heap_blks_read, + pg_stat_get_tab_blocks_hit(C.oid) AS heap_blks_hit, I.idx_blks_read AS idx_blks_read, I.idx_blks_hit AS idx_blks_hit, - pg_stat_get_blocks_fetched(T.oid) - - pg_stat_get_blocks_hit(T.oid) AS toast_blks_read, - pg_stat_get_blocks_hit(T.oid) AS toast_blks_hit, + pg_stat_get_tab_blocks_fetched(T.oid) - + pg_stat_get_tab_blocks_hit(T.oid) AS toast_blks_read, + pg_stat_get_tab_blocks_hit(T.oid) AS toast_blks_hit, X.idx_blks_read AS tidx_blks_read, X.idx_blks_hit AS tidx_blks_hit FROM pg_class C LEFT JOIN pg_class T ON C.reltoastrelid = T.oid LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace) LEFT JOIN LATERAL ( - SELECT sum(pg_stat_get_blocks_fetched(indexrelid) - - pg_stat_get_blocks_hit(indexrelid))::bigint + SELECT sum(pg_stat_get_ind_blocks_fetched(indexrelid) - + pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_read, - sum(pg_stat_get_blocks_hit(indexrelid))::bigint + sum(pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_hit FROM pg_index WHERE indrelid = C.oid ) I ON true LEFT JOIN LATERAL ( - SELECT sum(pg_stat_get_blocks_fetched(indexrelid) - - pg_stat_get_blocks_hit(indexrelid))::bigint + SELECT sum(pg_stat_get_ind_blocks_fetched(indexrelid) - + pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_read, - sum(pg_stat_get_blocks_hit(indexrelid))::bigint + sum(pg_stat_get_ind_blocks_hit(indexrelid))::bigint AS idx_blks_hit FROM pg_index WHERE indrelid = T.oid ) X ON true WHERE C.relkind IN ('r', 't', 'm'); @@ -774,10 +774,10 @@ CREATE VIEW pg_stat_all_indexes AS N.nspname AS schemaname, C.relname AS relname, I.relname AS indexrelname, - pg_stat_get_numscans(I.oid) AS idx_scan, - pg_stat_get_lastscan(I.oid) AS last_idx_scan, - pg_stat_get_tuples_returned(I.oid) AS idx_tup_read, - pg_stat_get_tuples_fetched(I.oid) AS idx_tup_fetch + pg_stat_get_ind_numscans(I.oid) AS idx_scan, + pg_stat_get_ind_lastscan(I.oid) AS last_idx_scan, + pg_stat_get_ind_tuples_returned(I.oid) AS idx_tup_read, + pg_stat_get_ind_tuples_fetched(I.oid) AS idx_tup_fetch FROM pg_class C JOIN pg_index X ON C.oid = X.indrelid JOIN pg_class I ON I.oid = X.indexrelid @@ -801,9 +801,9 @@ CREATE VIEW pg_statio_all_indexes AS N.nspname AS schemaname, C.relname AS relname, I.relname AS indexrelname, - pg_stat_get_blocks_fetched(I.oid) - - pg_stat_get_blocks_hit(I.oid) AS idx_blks_read, - pg_stat_get_blocks_hit(I.oid) AS idx_blks_hit + pg_stat_get_ind_blocks_fetched(I.oid) - + pg_stat_get_ind_blocks_hit(I.oid) AS idx_blks_read, + pg_stat_get_ind_blocks_hit(I.oid) AS idx_blks_hit FROM pg_class C JOIN pg_index X ON C.oid = X.indrelid JOIN pg_class I ON I.oid = X.indexrelid @@ -825,9 +825,9 @@ CREATE VIEW pg_statio_all_sequences AS C.oid AS relid, N.nspname AS schemaname, C.relname AS relname, - pg_stat_get_blocks_fetched(C.oid) - - pg_stat_get_blocks_hit(C.oid) AS blks_read, - pg_stat_get_blocks_hit(C.oid) AS blks_hit + pg_stat_get_ind_blocks_fetched(C.oid) - + pg_stat_get_tab_blocks_hit(C.oid) AS blks_read, + pg_stat_get_tab_blocks_hit(C.oid) AS blks_hit FROM pg_class C LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace) WHERE C.relkind = 'S'; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index 0a05577b68..daa3046bc6 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -768,11 +768,19 @@ ReadBufferExtended(Relation reln, ForkNumber forkNum, BlockNumber blockNum, * Read the buffer, and update pgstat counters to reflect a cache hit or * miss. */ - pgstat_count_buffer_read(reln); + if (reln->rd_rel->relkind == RELKIND_INDEX) + pgstat_count_index_buffer_read(reln); + else + pgstat_count_table_buffer_read(reln); buf = ReadBuffer_common(RelationGetSmgr(reln), reln->rd_rel->relpersistence, forkNum, blockNum, mode, strategy, &hit); if (hit) - pgstat_count_buffer_hit(reln); + { + if (reln->rd_rel->relkind == RELKIND_INDEX) + pgstat_count_index_buffer_hit(reln); + else + pgstat_count_table_buffer_hit(reln); + } return buf; } diff --git a/src/backend/utils/activity/Makefile b/src/backend/utils/activity/Makefile index 7d7482dde0..a73d529894 100644 --- a/src/backend/utils/activity/Makefile +++ b/src/backend/utils/activity/Makefile @@ -23,11 +23,12 @@ OBJS = \ pgstat_database.o \ pgstat_function.o \ pgstat_io.o \ - pgstat_relation.o \ + pgstat_index.o \ pgstat_replslot.o \ pgstat_shmem.o \ pgstat_slru.o \ pgstat_subscription.o \ + pgstat_table.o \ pgstat_wal.o \ pgstat_xact.o \ wait_event.o diff --git a/src/backend/utils/activity/meson.build b/src/backend/utils/activity/meson.build index 518ee3f798..80d611c40d 100644 --- a/src/backend/utils/activity/meson.build +++ b/src/backend/utils/activity/meson.build @@ -10,11 +10,12 @@ backend_sources += files( 'pgstat_database.c', 'pgstat_function.c', 'pgstat_io.c', - 'pgstat_relation.c', + 'pgstat_index.c', 'pgstat_replslot.c', 'pgstat_shmem.c', 'pgstat_slru.c', 'pgstat_subscription.c', + 'pgstat_table.c', 'pgstat_wal.c', 'pgstat_xact.c', 'wait_event.c', diff --git a/src/backend/utils/activity/pgstat.c b/src/backend/utils/activity/pgstat.c index b125802b21..03edd1265c 100644 --- a/src/backend/utils/activity/pgstat.c +++ b/src/backend/utils/activity/pgstat.c @@ -73,10 +73,11 @@ * - pgstat_database.c * - pgstat_function.c * - pgstat_io.c - * - pgstat_relation.c + * - pgstat_index.c * - pgstat_replslot.c * - pgstat_slru.c * - pgstat_subscription.c + * - pgstat_table.c * - pgstat_wal.c * * Whenever possible infrastructure files should not contain code related to @@ -270,18 +271,32 @@ static const PgStat_KindInfo pgstat_kind_infos[PGSTAT_NUM_KINDS] = { .reset_timestamp_cb = pgstat_database_reset_timestamp_cb, }, - [PGSTAT_KIND_RELATION] = { - .name = "relation", + [PGSTAT_KIND_TABLE] = { + .name = "table", .fixed_amount = false, - .shared_size = sizeof(PgStatShared_Relation), - .shared_data_off = offsetof(PgStatShared_Relation, stats), - .shared_data_len = sizeof(((PgStatShared_Relation *) 0)->stats), + .shared_size = sizeof(PgStatShared_Table), + .shared_data_off = offsetof(PgStatShared_Table, stats), + .shared_data_len = sizeof(((PgStatShared_Table *) 0)->stats), .pending_size = sizeof(PgStat_TableStatus), - .flush_pending_cb = pgstat_relation_flush_cb, - .delete_pending_cb = pgstat_relation_delete_pending_cb, + .flush_pending_cb = pgstat_table_flush_cb, + .delete_pending_cb = pgstat_table_delete_pending_cb, + }, + + [PGSTAT_KIND_INDEX] = { + .name = "index", + + .fixed_amount = false, + + .shared_size = sizeof(PgStatShared_Index), + .shared_data_off = offsetof(PgStatShared_Index, stats), + .shared_data_len = sizeof(((PgStatShared_Index *) 0)->stats), + .pending_size = sizeof(PgStat_IndexStatus), + + .flush_pending_cb = pgstat_index_flush_cb, + .delete_pending_cb = pgstat_index_delete_pending_cb, }, [PGSTAT_KIND_FUNCTION] = { diff --git a/src/backend/utils/activity/pgstat_index.c b/src/backend/utils/activity/pgstat_index.c new file mode 100644 index 0000000000..882f6cf30d --- /dev/null +++ b/src/backend/utils/activity/pgstat_index.c @@ -0,0 +1,297 @@ +/* ------------------------------------------------------------------------- + * + * pgstat_index.c + * Implementation of index statistics. + * + * This file contains the implementation of function index. It is kept + * separate from pgstat.c to enforce the line between the statistics access / + * storage implementation and the details about individual types of + * statistics. + * + * Copyright (c) 2001-2023, PostgreSQL Global Development Group + * + * IDENTIFICATION + * src/backend/utils/activity/pgstat_index.c + * ------------------------------------------------------------------------- + */ + +#include "postgres.h" + +#include "access/xact.h" +#include "utils/pgstat_internal.h" +#include "utils/rel.h" +#include "catalog/catalog.h" + +static PgStat_IndexStatus *pgstat_prep_index_pending(Oid rel_id, bool isshared); + +/* + * Copy stats between indexes. This is used for things like REINDEX + * CONCURRENTLY. + */ +void +pgstat_copy_index_stats(Relation dst, Relation src) +{ + PgStat_StatIndEntry *srcstats; + PgStatShared_Index *dstshstats; + PgStat_EntryRef *dst_ref; + + srcstats = pgstat_fetch_stat_indentry_ext(src->rd_rel->relisshared, + RelationGetRelid(src)); + if (!srcstats) + return; + + dst_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_INDEX, + dst->rd_rel->relisshared ? InvalidOid : MyDatabaseId, + RelationGetRelid(dst), + false); + + dstshstats = (PgStatShared_Index *) dst_ref->shared_stats; + dstshstats->stats = *srcstats; + + pgstat_unlock_entry(dst_ref); +} + +/* + * Initialize a relcache entry to count access statistics. Called whenever an + * index is opened. + * + * We assume that a relcache entry's pgstatind_info field is zeroed by relcache.c + * when the relcache entry is made; thereafter it is long-lived data. + * + * This does not create a reference to a stats entry in shared memory, nor + * allocate memory for the pending stats. That happens in + * pgstat_assoc_index(). + */ +void +pgstat_init_index(Relation rel) +{ + /* + * We only count stats for indexes + */ + Assert(rel->rd_rel->relkind == RELKIND_INDEX); + + if (!pgstat_track_counts) + { + if (rel->pgstatind_info != NULL) + pgstat_unlink_index(rel); + + /* We're not counting at all */ + rel->pgstat_enabled = false; + rel->pgstatind_info = NULL; + return; + } + + rel->pgstat_enabled = true; +} + +/* + * Prepare for statistics for this index to be collected. + * + * This ensures we have a reference to the stats entry before stats can be + * generated. That is important because an index drop in another + * connection could otherwise lead to the stats entry being dropped, which then + * later would get recreated when flushing stats. + * + * This is separate from pgstat_init_index() as it is not uncommon for + * relcache entries to be opened without ever getting stats reported. + */ +void +pgstat_assoc_index(Relation rel) +{ + Assert(rel->pgstat_enabled); + Assert(rel->pgstatind_info == NULL); + + /* Else find or make the PgStat_IndexStatus entry, and update link */ + rel->pgstatind_info = pgstat_prep_index_pending(RelationGetRelid(rel), + rel->rd_rel->relisshared); + + /* don't allow link a stats to multiple relcache entries */ + Assert(rel->pgstatind_info->relation == NULL); + + /* mark this relation as the owner */ + rel->pgstatind_info->relation = rel; +} + +/* + * Break the mutual link between a relcache entry and pending index stats entry. + * This must be called whenever one end of the link is removed. + */ +void +pgstat_unlink_index(Relation rel) +{ + + if (rel->pgstatind_info == NULL) + return; + + /* link sanity check for the index stats */ + if (rel->pgstatind_info) + { + Assert(rel->pgstatind_info->relation == rel); + rel->pgstatind_info->relation = NULL; + rel->pgstatind_info = NULL; + } +} + +/* + * Ensure that index stats are dropped if transaction aborts. + */ +void +pgstat_create_index(Relation rel) +{ + pgstat_create_transactional(PGSTAT_KIND_INDEX, + rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, + RelationGetRelid(rel)); +} + +/* + * Ensure that index stats are dropped if transaction commits. + */ +void +pgstat_drop_index(Relation rel) +{ + pgstat_drop_transactional(PGSTAT_KIND_INDEX, + rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, + RelationGetRelid(rel)); +} + +/* + * Support function for the SQL-callable pgstat* functions. Returns + * the collected statistics for one index or NULL. NULL doesn't mean + * that the index doesn't exist, just that there are no statistics, so the + * caller is better off to report ZERO instead. + */ +PgStat_StatIndEntry * +pgstat_fetch_stat_indentry(Oid relid) +{ + return pgstat_fetch_stat_indentry_ext(IsSharedRelation(relid), relid); +} + +/* + * More efficient version of pgstat_fetch_stat_indentry(), allowing to specify + * whether the to-be-accessed index is shared or not. + */ +PgStat_StatIndEntry * +pgstat_fetch_stat_indentry_ext(bool shared, Oid reloid) +{ + Oid dboid = (shared ? InvalidOid : MyDatabaseId); + + return (PgStat_StatIndEntry *) + pgstat_fetch_entry(PGSTAT_KIND_INDEX, dboid, reloid); +} + +/* + * find any existing PgStat_IndexStatus entry for rel + * + * Find any existing PgStat_IndexStatus entry for rel_id in the current + * database. If not found, try finding from shared indexes. + * + * If no entry found, return NULL, don't create a new one + */ +PgStat_IndexStatus * +find_indstat_entry(Oid rel_id) +{ + PgStat_EntryRef *entry_ref; + + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_INDEX, MyDatabaseId, rel_id); + if (!entry_ref) + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_INDEX, InvalidOid, rel_id); + + if (entry_ref) + return entry_ref->pending; + return NULL; +} + +/* + * Flush out pending stats for the entry + * + * If nowait is true, this function returns false if lock could not + * immediately acquired, otherwise true is returned. + * + * Some of the stats are copied to the corresponding pending database stats + * entry when successfully flushing. + */ +bool +pgstat_index_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) +{ + static const PgStat_IndexCounts all_zeroes; + Oid dboid; + + PgStat_IndexStatus *lstats; /* pending stats entry */ + PgStatShared_Index *shrelcomstats; + PgStat_StatIndEntry *indentry; /* index entry of shared stats */ + PgStat_StatDBEntry *dbentry; /* pending database entry */ + + dboid = entry_ref->shared_entry->key.dboid; + lstats = (PgStat_IndexStatus *) entry_ref->pending; + shrelcomstats = (PgStatShared_Index *) entry_ref->shared_stats; + + /* + * Ignore entries that didn't accumulate any actual counts, such as + * indexes that were opened by the planner but not used. + */ + if (memcmp(&lstats->i_counts, &all_zeroes, + sizeof(PgStat_IndexCounts)) == 0) + { + return true; + } + + if (!pgstat_lock_entry(entry_ref, nowait)) + return false; + + /* add the values to the shared entry. */ + indentry = &shrelcomstats->stats; + + indentry->numscans += lstats->i_counts.i_numscans; + + if (lstats->i_counts.i_numscans) + { + TimestampTz t = GetCurrentTransactionStopTimestamp(); + + if (t > indentry->lastscan) + indentry->lastscan = t; + } + indentry->tuples_returned += lstats->i_counts.i_tuples_returned; + indentry->tuples_fetched += lstats->i_counts.i_tuples_fetched; + indentry->blocks_fetched += lstats->i_counts.i_blocks_fetched; + indentry->blocks_hit += lstats->i_counts.i_blocks_hit; + + pgstat_unlock_entry(entry_ref); + + /* The entry was successfully flushed, add the same to database stats */ + dbentry = pgstat_prep_database_pending(dboid); + dbentry->tuples_returned += lstats->i_counts.i_tuples_returned; + dbentry->tuples_fetched += lstats->i_counts.i_tuples_fetched; + dbentry->blocks_fetched += lstats->i_counts.i_blocks_fetched; + dbentry->blocks_hit += lstats->i_counts.i_blocks_hit; + + return true; +} + +void +pgstat_index_delete_pending_cb(PgStat_EntryRef *entry_ref) +{ + PgStat_IndexStatus *pending = (PgStat_IndexStatus *) entry_ref->pending; + + if (pending->relation) + pgstat_unlink_index(pending->relation); +} + +/* + * Find or create a PgStat_IndexStatus entry for rel. New entry is created and + * initialized if not exists. + */ +static PgStat_IndexStatus * +pgstat_prep_index_pending(Oid rel_id, bool isshared) +{ + PgStat_EntryRef *entry_ref; + PgStat_IndexStatus *pending; + + entry_ref = pgstat_prep_pending_entry(PGSTAT_KIND_INDEX, + isshared ? InvalidOid : MyDatabaseId, + rel_id, NULL); + pending = entry_ref->pending; + pending->r_id = rel_id; + pending->r_shared = isshared; + + return pending; +} diff --git a/src/backend/utils/activity/pgstat_relation.c b/src/backend/utils/activity/pgstat_table.c similarity index 76% rename from src/backend/utils/activity/pgstat_relation.c rename to src/backend/utils/activity/pgstat_table.c index f793ac1516..51ac4e41e2 100644 --- a/src/backend/utils/activity/pgstat_relation.c +++ b/src/backend/utils/activity/pgstat_table.c @@ -1,9 +1,9 @@ /* ------------------------------------------------------------------------- * - * pgstat_relation.c - * Implementation of relation statistics. + * pgstat_table.c + * Implementation of table statistics. * - * This file contains the implementation of function relation. It is kept + * This file contains the implementation of function table. It is kept * separate from pgstat.c to enforce the line between the statistics access / * storage implementation and the details about individual types of * statistics. @@ -11,7 +11,7 @@ * Copyright (c) 2001-2023, PostgreSQL Global Development Group * * IDENTIFICATION - * src/backend/utils/activity/pgstat_relation.c + * src/backend/utils/activity/pgstat_table.c * ------------------------------------------------------------------------- */ @@ -44,74 +44,48 @@ typedef struct TwoPhasePgStatRecord } TwoPhasePgStatRecord; -static PgStat_TableStatus *pgstat_prep_relation_pending(Oid rel_id, bool isshared); -static void add_tabstat_xact_level(PgStat_TableStatus *pgstat_info, int nest_level); -static void ensure_tabstat_xact_level(PgStat_TableStatus *pgstat_info); +static PgStat_TableStatus *pgstat_prep_table_pending(Oid rel_id, bool isshared); +static void add_tabstat_xact_level(PgStat_TableStatus *pgstattab_info, int nest_level); +static void ensure_tabstat_xact_level(PgStat_TableStatus *pgstattab_info); static void save_truncdrop_counters(PgStat_TableXactStatus *trans, bool is_drop); static void restore_truncdrop_counters(PgStat_TableXactStatus *trans); - -/* - * Copy stats between relations. This is used for things like REINDEX - * CONCURRENTLY. - */ -void -pgstat_copy_relation_stats(Relation dst, Relation src) -{ - PgStat_StatTabEntry *srcstats; - PgStatShared_Relation *dstshstats; - PgStat_EntryRef *dst_ref; - - srcstats = pgstat_fetch_stat_tabentry_ext(src->rd_rel->relisshared, - RelationGetRelid(src)); - if (!srcstats) - return; - - dst_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_RELATION, - dst->rd_rel->relisshared ? InvalidOid : MyDatabaseId, - RelationGetRelid(dst), - false); - - dstshstats = (PgStatShared_Relation *) dst_ref->shared_stats; - dstshstats->stats = *srcstats; - - pgstat_unlock_entry(dst_ref); -} - /* * Initialize a relcache entry to count access statistics. Called whenever a - * relation is opened. + * table is opened. * - * We assume that a relcache entry's pgstat_info field is zeroed by relcache.c + * We assume that a relcache entry's pgstattab_info field is zeroed by relcache.c * when the relcache entry is made; thereafter it is long-lived data. * * This does not create a reference to a stats entry in shared memory, nor * allocate memory for the pending stats. That happens in - * pgstat_assoc_relation(). + * pgstat_assoc_table(). */ void -pgstat_init_relation(Relation rel) +pgstat_init_table(Relation rel) { char relkind = rel->rd_rel->relkind; + Assert(relkind != RELKIND_INDEX); + /* * We only count stats for relations with storage and partitioned tables */ if (!RELKIND_HAS_STORAGE(relkind) && relkind != RELKIND_PARTITIONED_TABLE) { rel->pgstat_enabled = false; - rel->pgstat_info = NULL; + rel->pgstattab_info = NULL; return; } if (!pgstat_track_counts) { - if (rel->pgstat_info) - pgstat_unlink_relation(rel); + if (rel->pgstattab_info != NULL) + pgstat_unlink_table(rel); /* We're not counting at all */ rel->pgstat_enabled = false; - rel->pgstat_info = NULL; + rel->pgstattab_info = NULL; return; } @@ -119,89 +93,92 @@ pgstat_init_relation(Relation rel) } /* - * Prepare for statistics for this relation to be collected. + * Prepare for statistics for this table to be collected. * * This ensures we have a reference to the stats entry before stats can be - * generated. That is important because a relation drop in another connection + * generated. That is important because a table drop in another connection * could otherwise lead to the stats entry being dropped, which then later * would get recreated when flushing stats. * - * This is separate from pgstat_init_relation() as it is not uncommon for + * This is separate from pgstat_init_table() as it is not uncommon for * relcache entries to be opened without ever getting stats reported. */ void -pgstat_assoc_relation(Relation rel) +pgstat_assoc_table(Relation rel) { Assert(rel->pgstat_enabled); - Assert(rel->pgstat_info == NULL); + Assert(rel->pgstattab_info == NULL); /* Else find or make the PgStat_TableStatus entry, and update link */ - rel->pgstat_info = pgstat_prep_relation_pending(RelationGetRelid(rel), + rel->pgstattab_info = pgstat_prep_table_pending(RelationGetRelid(rel), rel->rd_rel->relisshared); /* don't allow link a stats to multiple relcache entries */ - Assert(rel->pgstat_info->relation == NULL); + Assert(rel->pgstattab_info->relation == NULL); /* mark this relation as the owner */ - rel->pgstat_info->relation = rel; + rel->pgstattab_info->relation = rel; } /* - * Break the mutual link between a relcache entry and pending stats entry. + * Break the mutual link between a relcache entry and pending table stats entry. * This must be called whenever one end of the link is removed. */ void -pgstat_unlink_relation(Relation rel) +pgstat_unlink_table(Relation rel) { - /* remove the link to stats info if any */ - if (rel->pgstat_info == NULL) + + if (rel->pgstattab_info == NULL) return; - /* link sanity check */ - Assert(rel->pgstat_info->relation == rel); - rel->pgstat_info->relation = NULL; - rel->pgstat_info = NULL; + /* link sanity check for the table stats */ + if (rel->pgstattab_info) + { + Assert(rel->pgstattab_info->relation == rel); + rel->pgstattab_info->relation = NULL; + rel->pgstattab_info = NULL; + } } /* - * Ensure that stats are dropped if transaction aborts. + * Ensure that table stats are dropped if transaction aborts. */ void -pgstat_create_relation(Relation rel) +pgstat_create_table(Relation rel) { - pgstat_create_transactional(PGSTAT_KIND_RELATION, + pgstat_create_transactional(PGSTAT_KIND_TABLE, rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, RelationGetRelid(rel)); } /* - * Ensure that stats are dropped if transaction commits. + * Ensure that table stats are dropped if transaction commits. */ void -pgstat_drop_relation(Relation rel) +pgstat_drop_table(Relation rel) { int nest_level = GetCurrentTransactionNestLevel(); - PgStat_TableStatus *pgstat_info; + PgStat_TableStatus *pgstattab_info; - pgstat_drop_transactional(PGSTAT_KIND_RELATION, + pgstat_drop_transactional(PGSTAT_KIND_TABLE, rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId, RelationGetRelid(rel)); - if (!pgstat_should_count_relation(rel)) + if (!pgstat_should_count_table(rel)) return; /* * Transactionally set counters to 0. That ensures that accesses to * pg_stat_xact_all_tables inside the transaction show 0. */ - pgstat_info = rel->pgstat_info; - if (pgstat_info->trans && - pgstat_info->trans->nest_level == nest_level) + pgstattab_info = rel->pgstattab_info; + if (pgstattab_info->trans && + pgstattab_info->trans->nest_level == nest_level) { - save_truncdrop_counters(pgstat_info->trans, true); - pgstat_info->trans->tuples_inserted = 0; - pgstat_info->trans->tuples_updated = 0; - pgstat_info->trans->tuples_deleted = 0; + save_truncdrop_counters(pgstattab_info->trans, true); + pgstattab_info->trans->tuples_inserted = 0; + pgstattab_info->trans->tuples_updated = 0; + pgstattab_info->trans->tuples_deleted = 0; } } @@ -213,7 +190,7 @@ pgstat_report_vacuum(Oid tableoid, bool shared, PgStat_Counter livetuples, PgStat_Counter deadtuples) { PgStat_EntryRef *entry_ref; - PgStatShared_Relation *shtabentry; + PgStatShared_Table *shtabentry; PgStat_StatTabEntry *tabentry; Oid dboid = (shared ? InvalidOid : MyDatabaseId); TimestampTz ts; @@ -225,10 +202,10 @@ pgstat_report_vacuum(Oid tableoid, bool shared, ts = GetCurrentTimestamp(); /* block acquiring lock for the same reason as pgstat_report_autovac() */ - entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_RELATION, + entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_TABLE, dboid, tableoid, false); - shtabentry = (PgStatShared_Relation *) entry_ref->shared_stats; + shtabentry = (PgStatShared_Table *) entry_ref->shared_stats; tabentry = &shtabentry->stats; tabentry->live_tuples = livetuples; @@ -280,7 +257,7 @@ pgstat_report_analyze(Relation rel, bool resetcounter) { PgStat_EntryRef *entry_ref; - PgStatShared_Relation *shtabentry; + PgStatShared_Table *shtabentry; PgStat_StatTabEntry *tabentry; Oid dboid = (rel->rd_rel->relisshared ? InvalidOid : MyDatabaseId); @@ -299,31 +276,31 @@ pgstat_report_analyze(Relation rel, * * Waste no time on partitioned tables, though. */ - if (pgstat_should_count_relation(rel) && + if (pgstat_should_count_table(rel) && rel->rd_rel->relkind != RELKIND_PARTITIONED_TABLE) { PgStat_TableXactStatus *trans; - for (trans = rel->pgstat_info->trans; trans; trans = trans->upper) + for (trans = rel->pgstattab_info->trans; trans; trans = trans->upper) { livetuples -= trans->tuples_inserted - trans->tuples_deleted; deadtuples -= trans->tuples_updated + trans->tuples_deleted; } /* count stuff inserted by already-aborted subxacts, too */ - deadtuples -= rel->pgstat_info->t_counts.t_delta_dead_tuples; + deadtuples -= rel->pgstattab_info->t_counts.t_delta_dead_tuples; /* Since ANALYZE's counts are estimates, we could have underflowed */ livetuples = Max(livetuples, 0); deadtuples = Max(deadtuples, 0); } /* block acquiring lock for the same reason as pgstat_report_autovac() */ - entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_RELATION, dboid, + entry_ref = pgstat_get_entry_ref_locked(PGSTAT_KIND_TABLE, dboid, RelationGetRelid(rel), false); /* can't get dropped while accessed */ Assert(entry_ref != NULL && entry_ref->shared_stats != NULL); - shtabentry = (PgStatShared_Relation *) entry_ref->shared_stats; + shtabentry = (PgStatShared_Table *) entry_ref->shared_stats; tabentry = &shtabentry->stats; tabentry->live_tuples = livetuples; @@ -360,12 +337,12 @@ pgstat_report_analyze(Relation rel, void pgstat_count_heap_insert(Relation rel, PgStat_Counter n) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - pgstat_info->trans->tuples_inserted += n; + ensure_tabstat_xact_level(pgstattab_info); + pgstattab_info->trans->tuples_inserted += n; } } @@ -375,16 +352,16 @@ pgstat_count_heap_insert(Relation rel, PgStat_Counter n) void pgstat_count_heap_update(Relation rel, bool hot) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - pgstat_info->trans->tuples_updated++; + ensure_tabstat_xact_level(pgstattab_info); + pgstattab_info->trans->tuples_updated++; /* t_tuples_hot_updated is nontransactional, so just advance it */ if (hot) - pgstat_info->t_counts.t_tuples_hot_updated++; + pgstattab_info->t_counts.t_tuples_hot_updated++; } } @@ -394,12 +371,12 @@ pgstat_count_heap_update(Relation rel, bool hot) void pgstat_count_heap_delete(Relation rel) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - pgstat_info->trans->tuples_deleted++; + ensure_tabstat_xact_level(pgstattab_info); + pgstattab_info->trans->tuples_deleted++; } } @@ -409,15 +386,15 @@ pgstat_count_heap_delete(Relation rel) void pgstat_count_truncate(Relation rel) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - ensure_tabstat_xact_level(pgstat_info); - save_truncdrop_counters(pgstat_info->trans, false); - pgstat_info->trans->tuples_inserted = 0; - pgstat_info->trans->tuples_updated = 0; - pgstat_info->trans->tuples_deleted = 0; + ensure_tabstat_xact_level(pgstattab_info); + save_truncdrop_counters(pgstattab_info->trans, false); + pgstattab_info->trans->tuples_inserted = 0; + pgstattab_info->trans->tuples_updated = 0; + pgstattab_info->trans->tuples_deleted = 0; } } @@ -432,11 +409,11 @@ pgstat_count_truncate(Relation rel) void pgstat_update_heap_dead_tuples(Relation rel, int delta) { - if (pgstat_should_count_relation(rel)) + if (pgstat_should_count_table(rel)) { - PgStat_TableStatus *pgstat_info = rel->pgstat_info; + PgStat_TableStatus *pgstattab_info = rel->pgstattab_info; - pgstat_info->t_counts.t_delta_dead_tuples -= delta; + pgstattab_info->t_counts.t_delta_dead_tuples -= delta; } } @@ -462,7 +439,7 @@ pgstat_fetch_stat_tabentry_ext(bool shared, Oid reloid) Oid dboid = (shared ? InvalidOid : MyDatabaseId); return (PgStat_StatTabEntry *) - pgstat_fetch_entry(PGSTAT_KIND_RELATION, dboid, reloid); + pgstat_fetch_entry(PGSTAT_KIND_TABLE, dboid, reloid); } /* @@ -478,9 +455,9 @@ find_tabstat_entry(Oid rel_id) { PgStat_EntryRef *entry_ref; - entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_RELATION, MyDatabaseId, rel_id); + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_TABLE, MyDatabaseId, rel_id); if (!entry_ref) - entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_RELATION, InvalidOid, rel_id); + entry_ref = pgstat_fetch_pending_entry(PGSTAT_KIND_TABLE, InvalidOid, rel_id); if (entry_ref) return entry_ref->pending; @@ -488,7 +465,7 @@ find_tabstat_entry(Oid rel_id) } /* - * Perform relation stats specific end-of-transaction work. Helper for + * Perform table stats specific end-of-transaction work. Helper for * AtEOXact_PgStat. * * Transfer transactional insert/update counts into the base tabstat entries. @@ -496,7 +473,7 @@ find_tabstat_entry(Oid rel_id) * TopTransactionContext and will go away anyway. */ void -AtEOXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit) +AtEOXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit) { PgStat_TableXactStatus *trans; @@ -547,14 +524,14 @@ AtEOXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit) } /* - * Perform relation stats specific end-of-sub-transaction work. Helper for + * Perform table stats specific end-of-sub-transaction work. Helper for * AtEOSubXact_PgStat. * * Transfer transactional insert/update counts into the next higher * subtransaction state. */ void -AtEOSubXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth) +AtEOSubXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth) { PgStat_TableXactStatus *trans; PgStat_TableXactStatus *next_trans; @@ -631,11 +608,11 @@ AtEOSubXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit, in } /* - * Generate 2PC records for all the pending transaction-dependent relation + * Generate 2PC records for all the pending transaction-dependent table * stats. */ void -AtPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state) +AtPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state) { PgStat_TableXactStatus *trans; @@ -670,10 +647,10 @@ AtPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state) * reported to the stats system immediately, while the effects on live and * dead tuple counts are preserved in the 2PC state file. * - * Note: AtEOXact_PgStat_Relations is not called during PREPARE. + * Note: AtEOXact_PgStat_Tables is not called during PREPARE. */ void -PostPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state) +PostPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state) { PgStat_TableXactStatus *trans; @@ -696,27 +673,27 @@ pgstat_twophase_postcommit(TransactionId xid, uint16 info, void *recdata, uint32 len) { TwoPhasePgStatRecord *rec = (TwoPhasePgStatRecord *) recdata; - PgStat_TableStatus *pgstat_info; + PgStat_TableStatus *pgstattab_info; /* Find or create a tabstat entry for the rel */ - pgstat_info = pgstat_prep_relation_pending(rec->t_id, rec->t_shared); + pgstattab_info = pgstat_prep_table_pending(rec->t_id, rec->t_shared); /* Same math as in AtEOXact_PgStat, commit case */ - pgstat_info->t_counts.t_tuples_inserted += rec->tuples_inserted; - pgstat_info->t_counts.t_tuples_updated += rec->tuples_updated; - pgstat_info->t_counts.t_tuples_deleted += rec->tuples_deleted; - pgstat_info->t_counts.t_truncdropped = rec->t_truncdropped; + pgstattab_info->t_counts.t_tuples_inserted += rec->tuples_inserted; + pgstattab_info->t_counts.t_tuples_updated += rec->tuples_updated; + pgstattab_info->t_counts.t_tuples_deleted += rec->tuples_deleted; + pgstattab_info->t_counts.t_truncdropped = rec->t_truncdropped; if (rec->t_truncdropped) { /* forget live/dead stats seen by backend thus far */ - pgstat_info->t_counts.t_delta_live_tuples = 0; - pgstat_info->t_counts.t_delta_dead_tuples = 0; + pgstattab_info->t_counts.t_delta_live_tuples = 0; + pgstattab_info->t_counts.t_delta_dead_tuples = 0; } - pgstat_info->t_counts.t_delta_live_tuples += + pgstattab_info->t_counts.t_delta_live_tuples += rec->tuples_inserted - rec->tuples_deleted; - pgstat_info->t_counts.t_delta_dead_tuples += + pgstattab_info->t_counts.t_delta_dead_tuples += rec->tuples_updated + rec->tuples_deleted; - pgstat_info->t_counts.t_changed_tuples += + pgstattab_info->t_counts.t_changed_tuples += rec->tuples_inserted + rec->tuples_updated + rec->tuples_deleted; } @@ -732,10 +709,10 @@ pgstat_twophase_postabort(TransactionId xid, uint16 info, void *recdata, uint32 len) { TwoPhasePgStatRecord *rec = (TwoPhasePgStatRecord *) recdata; - PgStat_TableStatus *pgstat_info; + PgStat_TableStatus *pgstattab_info; /* Find or create a tabstat entry for the rel */ - pgstat_info = pgstat_prep_relation_pending(rec->t_id, rec->t_shared); + pgstattab_info = pgstat_prep_table_pending(rec->t_id, rec->t_shared); /* Same math as in AtEOXact_PgStat, abort case */ if (rec->t_truncdropped) @@ -744,10 +721,10 @@ pgstat_twophase_postabort(TransactionId xid, uint16 info, rec->tuples_updated = rec->updated_pre_truncdrop; rec->tuples_deleted = rec->deleted_pre_truncdrop; } - pgstat_info->t_counts.t_tuples_inserted += rec->tuples_inserted; - pgstat_info->t_counts.t_tuples_updated += rec->tuples_updated; - pgstat_info->t_counts.t_tuples_deleted += rec->tuples_deleted; - pgstat_info->t_counts.t_delta_dead_tuples += + pgstattab_info->t_counts.t_tuples_inserted += rec->tuples_inserted; + pgstattab_info->t_counts.t_tuples_updated += rec->tuples_updated; + pgstattab_info->t_counts.t_tuples_deleted += rec->tuples_deleted; + pgstattab_info->t_counts.t_delta_dead_tuples += rec->tuples_inserted + rec->tuples_updated; } @@ -761,22 +738,21 @@ pgstat_twophase_postabort(TransactionId xid, uint16 info, * entry when successfully flushing. */ bool -pgstat_relation_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) +pgstat_table_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) { static const PgStat_TableCounts all_zeroes; Oid dboid; PgStat_TableStatus *lstats; /* pending stats entry */ - PgStatShared_Relation *shtabstats; + PgStatShared_Table *shtabstats; PgStat_StatTabEntry *tabentry; /* table entry of shared stats */ PgStat_StatDBEntry *dbentry; /* pending database entry */ dboid = entry_ref->shared_entry->key.dboid; lstats = (PgStat_TableStatus *) entry_ref->pending; - shtabstats = (PgStatShared_Relation *) entry_ref->shared_stats; + shtabstats = (PgStatShared_Table *) entry_ref->shared_stats; /* - * Ignore entries that didn't accumulate any actual counts, such as - * indexes that were opened by the planner but not used. + * Ignore entries that didn't accumulate any actual counts. */ if (memcmp(&lstats->t_counts, &all_zeroes, sizeof(PgStat_TableCounts)) == 0) @@ -843,12 +819,12 @@ pgstat_relation_flush_cb(PgStat_EntryRef *entry_ref, bool nowait) } void -pgstat_relation_delete_pending_cb(PgStat_EntryRef *entry_ref) +pgstat_table_delete_pending_cb(PgStat_EntryRef *entry_ref) { PgStat_TableStatus *pending = (PgStat_TableStatus *) entry_ref->pending; if (pending->relation) - pgstat_unlink_relation(pending->relation); + pgstat_unlink_table(pending->relation); } /* @@ -856,12 +832,12 @@ pgstat_relation_delete_pending_cb(PgStat_EntryRef *entry_ref) * initialized if not exists. */ static PgStat_TableStatus * -pgstat_prep_relation_pending(Oid rel_id, bool isshared) +pgstat_prep_table_pending(Oid rel_id, bool isshared) { PgStat_EntryRef *entry_ref; PgStat_TableStatus *pending; - entry_ref = pgstat_prep_pending_entry(PGSTAT_KIND_RELATION, + entry_ref = pgstat_prep_pending_entry(PGSTAT_KIND_TABLE, isshared ? InvalidOid : MyDatabaseId, rel_id, NULL); pending = entry_ref->pending; @@ -875,7 +851,7 @@ pgstat_prep_relation_pending(Oid rel_id, bool isshared) * add a new (sub)transaction state record */ static void -add_tabstat_xact_level(PgStat_TableStatus *pgstat_info, int nest_level) +add_tabstat_xact_level(PgStat_TableStatus *pgstattab_info, int nest_level) { PgStat_SubXactStatus *xact_state; PgStat_TableXactStatus *trans; @@ -891,24 +867,24 @@ add_tabstat_xact_level(PgStat_TableStatus *pgstat_info, int nest_level) MemoryContextAllocZero(TopTransactionContext, sizeof(PgStat_TableXactStatus)); trans->nest_level = nest_level; - trans->upper = pgstat_info->trans; - trans->parent = pgstat_info; + trans->upper = pgstattab_info->trans; + trans->parent = pgstattab_info; trans->next = xact_state->first; xact_state->first = trans; - pgstat_info->trans = trans; + pgstattab_info->trans = trans; } /* * Add a new (sub)transaction record if needed. */ static void -ensure_tabstat_xact_level(PgStat_TableStatus *pgstat_info) +ensure_tabstat_xact_level(PgStat_TableStatus *pgstattab_info) { int nest_level = GetCurrentTransactionNestLevel(); - if (pgstat_info->trans == NULL || - pgstat_info->trans->nest_level != nest_level) - add_tabstat_xact_level(pgstat_info, nest_level); + if (pgstattab_info->trans == NULL || + pgstattab_info->trans->nest_level != nest_level) + add_tabstat_xact_level(pgstattab_info, nest_level); } /* diff --git a/src/backend/utils/activity/pgstat_xact.c b/src/backend/utils/activity/pgstat_xact.c index 91cdd9222e..ee43362b73 100644 --- a/src/backend/utils/activity/pgstat_xact.c +++ b/src/backend/utils/activity/pgstat_xact.c @@ -51,7 +51,7 @@ AtEOXact_PgStat(bool isCommit, bool parallel) Assert(xact_state->nest_level == 1); Assert(xact_state->prev == NULL); - AtEOXact_PgStat_Relations(xact_state, isCommit); + AtEOXact_PgStat_Tables(xact_state, isCommit); AtEOXact_PgStat_DroppedStats(xact_state, isCommit); } pgStatXactStack = NULL; @@ -122,7 +122,7 @@ AtEOSubXact_PgStat(bool isCommit, int nestDepth) /* delink xact_state from stack immediately to simplify reuse case */ pgStatXactStack = xact_state->prev; - AtEOSubXact_PgStat_Relations(xact_state, isCommit, nestDepth); + AtEOSubXact_PgStat_Tables(xact_state, isCommit, nestDepth); AtEOSubXact_PgStat_DroppedStats(xact_state, isCommit, nestDepth); pfree(xact_state); @@ -197,7 +197,7 @@ AtPrepare_PgStat(void) Assert(xact_state->nest_level == 1); Assert(xact_state->prev == NULL); - AtPrepare_PgStat_Relations(xact_state); + AtPrepare_PgStat_Tables(xact_state); } } @@ -221,7 +221,7 @@ PostPrepare_PgStat(void) Assert(xact_state->nest_level == 1); Assert(xact_state->prev == NULL); - PostPrepare_PgStat_Relations(xact_state); + PostPrepare_PgStat_Tables(xact_state); } pgStatXactStack = NULL; diff --git a/src/backend/utils/adt/pgstatfuncs.c b/src/backend/utils/adt/pgstatfuncs.c index 35c6d46555..dc469f1b96 100644 --- a/src/backend/utils/adt/pgstatfuncs.c +++ b/src/backend/utils/adt/pgstatfuncs.c @@ -37,106 +37,159 @@ #define HAS_PGSTAT_PERMISSIONS(role) (has_privs_of_role(GetUserId(), ROLE_PG_READ_ALL_STATS) || has_privs_of_role(GetUserId(), role)) -#define PG_STAT_GET_RELENTRY_INT64(stat) \ -Datum \ -CppConcat(pg_stat_get_,stat)(PG_FUNCTION_ARGS) \ -{ \ - Oid relid = PG_GETARG_OID(0); \ - int64 result; \ - PgStat_StatTabEntry *tabentry; \ - \ - if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ - result = 0; \ - else \ - result = (int64) (tabentry->stat); \ - \ - PG_RETURN_INT64(result); \ -} - -/* pg_stat_get_analyze_count */ -PG_STAT_GET_RELENTRY_INT64(analyze_count) - -/* pg_stat_get_autoanalyze_count */ -PG_STAT_GET_RELENTRY_INT64(autoanalyze_count) - -/* pg_stat_get_autovacuum_count */ -PG_STAT_GET_RELENTRY_INT64(autovacuum_count) - -/* pg_stat_get_blocks_fetched */ -PG_STAT_GET_RELENTRY_INT64(blocks_fetched) +#define PG_STAT_GET_TABENTRY_INT64(stat) \ +Datum \ +CppConcat(pg_stat_get_tab_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + int64 result; \ + PgStat_StatTabEntry *tabentry; \ + \ + if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ + result = 0; \ + else \ + result = (int64) (tabentry->stat); \ + \ + PG_RETURN_INT64(result); \ +} + +/* pg_stat_get_tab_analyze_count */ +PG_STAT_GET_TABENTRY_INT64(analyze_count) + +/* pg_stat_get_tab_autoanalyze_count */ +PG_STAT_GET_TABENTRY_INT64(autoanalyze_count) + +/* pg_stat_get_tab_autovacuum_count */ +PG_STAT_GET_TABENTRY_INT64(autovacuum_count) + +/* pg_stat_get_tab_blocks_fetched */ +PG_STAT_GET_TABENTRY_INT64(blocks_fetched) + +/* pg_stat_get_tab_blocks_hit */ +PG_STAT_GET_TABENTRY_INT64(blocks_hit) -/* pg_stat_get_blocks_hit */ -PG_STAT_GET_RELENTRY_INT64(blocks_hit) +/* pg_stat_get_tab_dead_tuples */ +PG_STAT_GET_TABENTRY_INT64(dead_tuples) -/* pg_stat_get_dead_tuples */ -PG_STAT_GET_RELENTRY_INT64(dead_tuples) - -/* pg_stat_get_ins_since_vacuum */ -PG_STAT_GET_RELENTRY_INT64(ins_since_vacuum) - -/* pg_stat_get_live_tuples */ -PG_STAT_GET_RELENTRY_INT64(live_tuples) - -/* pg_stat_get_mods_since_analyze */ -PG_STAT_GET_RELENTRY_INT64(mod_since_analyze) - -/* pg_stat_get_numscans */ -PG_STAT_GET_RELENTRY_INT64(numscans) - -/* pg_stat_get_tuples_deleted */ -PG_STAT_GET_RELENTRY_INT64(tuples_deleted) - -/* pg_stat_get_tuples_fetched */ -PG_STAT_GET_RELENTRY_INT64(tuples_fetched) - -/* pg_stat_get_tuples_hot_updated */ -PG_STAT_GET_RELENTRY_INT64(tuples_hot_updated) - -/* pg_stat_get_tuples_inserted */ -PG_STAT_GET_RELENTRY_INT64(tuples_inserted) - -/* pg_stat_get_tuples_returned */ -PG_STAT_GET_RELENTRY_INT64(tuples_returned) - -/* pg_stat_get_tuples_updated */ -PG_STAT_GET_RELENTRY_INT64(tuples_updated) - -/* pg_stat_get_vacuum_count */ -PG_STAT_GET_RELENTRY_INT64(vacuum_count) - -#define PG_STAT_GET_RELENTRY_TIMESTAMPTZ(stat) \ -Datum \ -CppConcat(pg_stat_get_,stat)(PG_FUNCTION_ARGS) \ -{ \ - Oid relid = PG_GETARG_OID(0); \ - TimestampTz result; \ - PgStat_StatTabEntry *tabentry; \ - \ - if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ - result = 0; \ - else \ - result = tabentry->stat; \ - \ - if (result == 0) \ - PG_RETURN_NULL(); \ - else \ - PG_RETURN_TIMESTAMPTZ(result); \ +/* pg_stat_get_tab_ins_since_vacuum */ +PG_STAT_GET_TABENTRY_INT64(ins_since_vacuum) + +/* pg_stat_get_tab_live_tuples */ +PG_STAT_GET_TABENTRY_INT64(live_tuples) + +/* pg_stat_get_tab_mods_since_analyze */ +PG_STAT_GET_TABENTRY_INT64(mod_since_analyze) + +/* pg_stat_get_tab_numscans */ +PG_STAT_GET_TABENTRY_INT64(numscans) + +/* pg_stat_get_tab_tuples_deleted */ +PG_STAT_GET_TABENTRY_INT64(tuples_deleted) + +/* pg_stat_get_tab_tuples_fetched */ +PG_STAT_GET_TABENTRY_INT64(tuples_fetched) + +/* pg_stat_get_tab_tuples_hot_updated */ +PG_STAT_GET_TABENTRY_INT64(tuples_hot_updated) + +/* pg_stat_get_tab_tuples_inserted */ +PG_STAT_GET_TABENTRY_INT64(tuples_inserted) + +/* pg_stat_get_tab_tuples_returned */ +PG_STAT_GET_TABENTRY_INT64(tuples_returned) + +/* pg_stat_get_tab_tuples_updated */ +PG_STAT_GET_TABENTRY_INT64(tuples_updated) + +/* pg_stat_get_tab_vacuum_count */ +PG_STAT_GET_TABENTRY_INT64(vacuum_count) + +#define PG_STAT_GET_INDENTRY_INT64(stat) \ +Datum \ +CppConcat(pg_stat_get_ind_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + int64 result; \ + PgStat_StatIndEntry *indentry; \ + \ + if ((indentry = pgstat_fetch_stat_indentry(relid)) == NULL) \ + result = 0; \ + else \ + result = (int64) (indentry->stat); \ + \ + PG_RETURN_INT64(result); \ +} + +/* pg_stat_get_ind_numscans */ +PG_STAT_GET_INDENTRY_INT64(numscans) + +/* pg_stat_get_ind_tuples_returned */ +PG_STAT_GET_INDENTRY_INT64(tuples_returned) + +/* pg_stat_get_ind_tuples_fetched */ +PG_STAT_GET_INDENTRY_INT64(tuples_fetched) + +/* pg_stat_get_ind_blocks_fetched */ +PG_STAT_GET_INDENTRY_INT64(blocks_fetched) + +/* pg_stat_get_ind_blocks_hit */ +PG_STAT_GET_INDENTRY_INT64(blocks_hit) + +#define PG_STAT_GET_TABENTRY_TIMESTAMPTZ(stat) \ +Datum \ +CppConcat(pg_stat_get_tab_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + TimestampTz result; \ + PgStat_StatTabEntry *tabentry; \ + \ + if ((tabentry = pgstat_fetch_stat_tabentry(relid)) == NULL) \ + result = 0; \ + else \ + result = tabentry->stat; \ + \ + if (result == 0) \ + PG_RETURN_NULL(); \ + else \ + PG_RETURN_TIMESTAMPTZ(result); \ } -/* pg_stat_get_last_analyze_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_analyze_time) +/* pg_stat_get_tab_last_analyze_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_analyze_time) -/* pg_stat_get_last_autoanalyze_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_autoanalyze_time) +/* pg_stat_get_tab_last_autoanalyze_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_autoanalyze_time) -/* pg_stat_get_last_autovacuum_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_autovacuum_time) +/* pg_stat_get_tab_last_autovacuum_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_autovacuum_time) -/* pg_stat_get_last_vacuum_time */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(last_vacuum_time) +/* pg_stat_get_tab_last_vacuum_time */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(last_vacuum_time) -/* pg_stat_get_lastscan */ -PG_STAT_GET_RELENTRY_TIMESTAMPTZ(lastscan) +/* pg_stat_get_tab_lastscan */ +PG_STAT_GET_TABENTRY_TIMESTAMPTZ(lastscan) + +#define PG_STAT_GET_INDENTRY_TIMESTAMPTZ(stat) \ +Datum \ +CppConcat(pg_stat_get_ind_,stat)(PG_FUNCTION_ARGS) \ +{ \ + Oid relid = PG_GETARG_OID(0); \ + TimestampTz result; \ + PgStat_StatIndEntry *indentry; \ + \ + if ((indentry = pgstat_fetch_stat_indentry(relid)) == NULL) \ + result = 0; \ + else \ + result = indentry->stat; \ + \ + if (result == 0) \ + PG_RETURN_NULL(); \ + else \ + PG_RETURN_TIMESTAMPTZ(result); \ +} + +/* pg_stat_get_ind_lastscan */ +PG_STAT_GET_INDENTRY_TIMESTAMPTZ(lastscan) Datum pg_stat_get_function_calls(PG_FUNCTION_ARGS) @@ -1496,7 +1549,7 @@ pg_stat_get_slru(PG_FUNCTION_ARGS) } Datum -pg_stat_get_xact_numscans(PG_FUNCTION_ARGS) +pg_stat_get_tab_xact_numscans(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; @@ -1510,17 +1563,32 @@ pg_stat_get_xact_numscans(PG_FUNCTION_ARGS) PG_RETURN_INT64(result); } +Datum +pg_stat_get_ind_xact_numscans(PG_FUNCTION_ARGS) +{ + Oid relid = PG_GETARG_OID(0); + int64 result; + PgStat_IndexStatus *indentry; + + if ((indentry = find_indstat_entry(relid)) == NULL) + result = 0; + else + result = (int64) (indentry->i_counts.i_numscans); + + PG_RETURN_INT64(result); +} + Datum pg_stat_get_xact_tuples_returned(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_tuples_returned); + result = (int64) (indentry->i_counts.i_tuples_returned); PG_RETURN_INT64(result); } @@ -1530,12 +1598,12 @@ pg_stat_get_xact_tuples_fetched(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_tuples_fetched); + result = (int64) (indentry->i_counts.i_tuples_fetched); PG_RETURN_INT64(result); } @@ -1623,12 +1691,12 @@ pg_stat_get_xact_blocks_fetched(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_blocks_fetched); + result = (int64) (indentry->i_counts.i_blocks_fetched); PG_RETURN_INT64(result); } @@ -1638,12 +1706,12 @@ pg_stat_get_xact_blocks_hit(PG_FUNCTION_ARGS) { Oid relid = PG_GETARG_OID(0); int64 result; - PgStat_TableStatus *tabentry; + PgStat_IndexStatus *indentry; - if ((tabentry = find_tabstat_entry(relid)) == NULL) + if ((indentry = find_indstat_entry(relid)) == NULL) result = 0; else - result = (int64) (tabentry->t_counts.t_blocks_hit); + result = (int64) (indentry->i_counts.i_blocks_hit); PG_RETURN_INT64(result); } @@ -1769,7 +1837,8 @@ pg_stat_reset_single_table_counters(PG_FUNCTION_ARGS) { Oid taboid = PG_GETARG_OID(0); - pgstat_reset(PGSTAT_KIND_RELATION, MyDatabaseId, taboid); + pgstat_reset(PGSTAT_KIND_TABLE, MyDatabaseId, taboid); + pgstat_reset(PGSTAT_KIND_INDEX, MyDatabaseId, taboid); PG_RETURN_VOID(); } diff --git a/src/backend/utils/cache/relcache.c b/src/backend/utils/cache/relcache.c index 13f7987373..d93b872653 100644 --- a/src/backend/utils/cache/relcache.c +++ b/src/backend/utils/cache/relcache.c @@ -2411,7 +2411,10 @@ RelationDestroyRelation(Relation relation, bool remember_tupdesc) RelationCloseSmgr(relation); /* break mutual link with stats entry */ - pgstat_unlink_relation(relation); + if (relation->rd_rel->relkind == RELKIND_INDEX) + pgstat_unlink_index(relation); + else + pgstat_unlink_table(relation); /* * Free all the subsidiary data structures of the relcache entry, then the @@ -2727,8 +2730,9 @@ RelationClearRelation(Relation relation, bool rebuild) SWAPFIELD(RowSecurityDesc *, rd_rsdesc); /* toast OID override must be preserved */ SWAPFIELD(Oid, rd_toastoid); - /* pgstat_info / enabled must be preserved */ - SWAPFIELD(struct PgStat_TableStatus *, pgstat_info); + /* pgstattab_info / pgstatind_info / enabled must be preserved */ + SWAPFIELD(struct PgStat_TableStatus *, pgstattab_info); + SWAPFIELD(struct PgStat_IndexStatus *, pgstatind_info); SWAPFIELD(bool, pgstat_enabled); /* preserve old partition key if we have one */ if (keep_partkey) @@ -6321,7 +6325,8 @@ load_relcache_init_file(bool shared) rel->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; rel->rd_droppedSubid = InvalidSubTransactionId; rel->rd_amcache = NULL; - rel->pgstat_info = NULL; + rel->pgstattab_info = NULL; + rel->pgstatind_info = NULL; /* * Recompute lock and physical addressing info. This is needed in diff --git a/src/include/catalog/pg_proc.dat b/src/include/catalog/pg_proc.dat index fbc4aade49..f5b2b46612 100644 --- a/src/include/catalog/pg_proc.dat +++ b/src/include/catalog/pg_proc.dat @@ -5312,96 +5312,120 @@ proargnames => '{mcv_list,index,values,nulls,frequency,base_frequency}', prosrc => 'pg_stats_ext_mcvlist_items' }, -{ oid => '1928', descr => 'statistics: number of scans done for table/index', - proname => 'pg_stat_get_numscans', provolatile => 's', proparallel => 'r', +{ oid => '1928', descr => 'statistics: number of scans done for table', + proname => 'pg_stat_get_tab_numscans', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_numscans' }, -{ oid => '9976', descr => 'statistics: time of the last scan for table/index', - proname => 'pg_stat_get_lastscan', provolatile => 's', proparallel => 'r', + prosrc => 'pg_stat_get_tab_numscans' }, +{ oid => '8296', descr => 'statistics: number of scans done for index', + proname => 'pg_stat_get_ind_numscans', provolatile => 's', proparallel => 'r', + prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_ind_numscans' }, +{ oid => '9976', descr => 'statistics: time of the last scan for table', + proname => 'pg_stat_get_tab_lastscan', provolatile => 's', proparallel => 'r', + prorettype => 'timestamptz', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_lastscan' }, +{ oid => '8626', descr => 'statistics: time of the last scan for index', + proname => 'pg_stat_get_ind_lastscan', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_lastscan' }, + prosrc => 'pg_stat_get_ind_lastscan' }, { oid => '1929', descr => 'statistics: number of tuples read by seqscan', - proname => 'pg_stat_get_tuples_returned', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_returned', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_returned' }, + prosrc => 'pg_stat_get_tab_tuples_returned' }, +{ oid => '9603', descr => 'statistics: number of tuples read by seqscan', + proname => 'pg_stat_get_ind_tuples_returned', provolatile => 's', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_ind_tuples_returned' }, { oid => '1930', descr => 'statistics: number of tuples fetched by idxscan', - proname => 'pg_stat_get_tuples_fetched', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_fetched', provolatile => 's', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_tuples_fetched' }, +{ oid => '8526', descr => 'statistics: number of tuples fetched by idxscan', + proname => 'pg_stat_get_ind_tuples_fetched', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_fetched' }, + prosrc => 'pg_stat_get_ind_tuples_fetched' }, { oid => '1931', descr => 'statistics: number of tuples inserted', - proname => 'pg_stat_get_tuples_inserted', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_inserted', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_inserted' }, + prosrc => 'pg_stat_get_tab_tuples_inserted' }, { oid => '1932', descr => 'statistics: number of tuples updated', - proname => 'pg_stat_get_tuples_updated', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_updated', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_updated' }, + prosrc => 'pg_stat_get_tab_tuples_updated' }, { oid => '1933', descr => 'statistics: number of tuples deleted', - proname => 'pg_stat_get_tuples_deleted', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_deleted', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_deleted' }, + prosrc => 'pg_stat_get_tab_tuples_deleted' }, { oid => '1972', descr => 'statistics: number of tuples hot updated', - proname => 'pg_stat_get_tuples_hot_updated', provolatile => 's', + proname => 'pg_stat_get_tab_tuples_hot_updated', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_tuples_hot_updated' }, + prosrc => 'pg_stat_get_tab_tuples_hot_updated' }, { oid => '2878', descr => 'statistics: number of live tuples', - proname => 'pg_stat_get_live_tuples', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_live_tuples', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_live_tuples' }, + prosrc => 'pg_stat_get_tab_live_tuples' }, { oid => '2879', descr => 'statistics: number of dead tuples', - proname => 'pg_stat_get_dead_tuples', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_dead_tuples', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_dead_tuples' }, + prosrc => 'pg_stat_get_tab_dead_tuples' }, { oid => '3177', descr => 'statistics: number of tuples changed since last analyze', - proname => 'pg_stat_get_mod_since_analyze', provolatile => 's', + proname => 'pg_stat_get_tab_mod_since_analyze', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_mod_since_analyze' }, + prosrc => 'pg_stat_get_tab_mod_since_analyze' }, { oid => '5053', descr => 'statistics: number of tuples inserted since last vacuum', - proname => 'pg_stat_get_ins_since_vacuum', provolatile => 's', + proname => 'pg_stat_get_tab_ins_since_vacuum', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_ins_since_vacuum' }, + prosrc => 'pg_stat_get_tab_ins_since_vacuum' }, { oid => '1934', descr => 'statistics: number of blocks fetched', - proname => 'pg_stat_get_blocks_fetched', provolatile => 's', + proname => 'pg_stat_get_tab_blocks_fetched', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_blocks_fetched' }, + prosrc => 'pg_stat_get_tab_blocks_fetched' }, +{ oid => '9432', descr => 'statistics: number of blocks fetched', + proname => 'pg_stat_get_ind_blocks_fetched', provolatile => 's', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_ind_blocks_fetched' }, { oid => '1935', descr => 'statistics: number of blocks found in cache', - proname => 'pg_stat_get_blocks_hit', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_blocks_hit', provolatile => 's', proparallel => 'r', + prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_blocks_hit' }, +{ oid => '8354', descr => 'statistics: number of blocks found in cache', + proname => 'pg_stat_get_ind_blocks_hit', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_blocks_hit' }, + prosrc => 'pg_stat_get_ind_blocks_hit' }, { oid => '2781', descr => 'statistics: last manual vacuum time for a table', - proname => 'pg_stat_get_last_vacuum_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_vacuum_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_vacuum_time' }, + prosrc => 'pg_stat_get_tab_last_vacuum_time' }, { oid => '2782', descr => 'statistics: last auto vacuum time for a table', - proname => 'pg_stat_get_last_autovacuum_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_autovacuum_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_autovacuum_time' }, + prosrc => 'pg_stat_get_tab_last_autovacuum_time' }, { oid => '2783', descr => 'statistics: last manual analyze time for a table', - proname => 'pg_stat_get_last_analyze_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_analyze_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_analyze_time' }, + prosrc => 'pg_stat_get_tab_last_analyze_time' }, { oid => '2784', descr => 'statistics: last auto analyze time for a table', - proname => 'pg_stat_get_last_autoanalyze_time', provolatile => 's', + proname => 'pg_stat_get_tab_last_autoanalyze_time', provolatile => 's', proparallel => 'r', prorettype => 'timestamptz', proargtypes => 'oid', - prosrc => 'pg_stat_get_last_autoanalyze_time' }, + prosrc => 'pg_stat_get_tab_last_autoanalyze_time' }, { oid => '3054', descr => 'statistics: number of manual vacuums for a table', - proname => 'pg_stat_get_vacuum_count', provolatile => 's', proparallel => 'r', + proname => 'pg_stat_get_tab_vacuum_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_vacuum_count' }, + prosrc => 'pg_stat_get_tab_vacuum_count' }, { oid => '3055', descr => 'statistics: number of auto vacuums for a table', - proname => 'pg_stat_get_autovacuum_count', provolatile => 's', + proname => 'pg_stat_get_tab_autovacuum_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_autovacuum_count' }, + prosrc => 'pg_stat_get_tab_autovacuum_count' }, { oid => '3056', descr => 'statistics: number of manual analyzes for a table', - proname => 'pg_stat_get_analyze_count', provolatile => 's', + proname => 'pg_stat_get_tab_analyze_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_analyze_count' }, + prosrc => 'pg_stat_get_tab_analyze_count' }, { oid => '3057', descr => 'statistics: number of auto analyzes for a table', - proname => 'pg_stat_get_autoanalyze_count', provolatile => 's', + proname => 'pg_stat_get_tab_autoanalyze_count', provolatile => 's', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_autoanalyze_count' }, + prosrc => 'pg_stat_get_tab_autoanalyze_count' }, { oid => '1936', descr => 'statistics: currently active backend IDs', proname => 'pg_stat_get_backend_idset', prorows => '100', proretset => 't', provolatile => 's', proparallel => 'r', prorettype => 'int4', @@ -5773,10 +5797,15 @@ prosrc => 'pg_stat_get_function_self_time' }, { oid => '3037', - descr => 'statistics: number of scans done for table/index in current transaction', - proname => 'pg_stat_get_xact_numscans', provolatile => 'v', + descr => 'statistics: number of scans done for table in current transaction', + proname => 'pg_stat_get_tab_xact_numscans', provolatile => 'v', + proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', + prosrc => 'pg_stat_get_tab_xact_numscans' }, +{ oid => '8892', + descr => 'statistics: number of scans done for index in current transaction', + proname => 'pg_stat_get_ind_xact_numscans', provolatile => 'v', proparallel => 'r', prorettype => 'int8', proargtypes => 'oid', - prosrc => 'pg_stat_get_xact_numscans' }, + prosrc => 'pg_stat_get_ind_xact_numscans' }, { oid => '3038', descr => 'statistics: number of tuples read by seqscan in current transaction', proname => 'pg_stat_get_xact_tuples_returned', provolatile => 'v', diff --git a/src/include/pgstat.h b/src/include/pgstat.h index 1e418b682b..4d3eb51f80 100644 --- a/src/include/pgstat.h +++ b/src/include/pgstat.h @@ -39,7 +39,8 @@ typedef enum PgStat_Kind /* stats for variable-numbered objects */ PGSTAT_KIND_DATABASE, /* database-wide statistics */ - PGSTAT_KIND_RELATION, /* per-table statistics */ + PGSTAT_KIND_TABLE, /* per-table statistics */ + PGSTAT_KIND_INDEX, /* per-index statistics */ PGSTAT_KIND_FUNCTION, /* per-function statistics */ PGSTAT_KIND_REPLSLOT, /* per-slot statistics */ PGSTAT_KIND_SUBSCRIPTION, /* per-subscription statistics */ @@ -137,6 +138,28 @@ typedef struct PgStat_BackendSubEntry PgStat_Counter sync_error_count; } PgStat_BackendSubEntry; +/* ---------- + * PgStat_IndexCounts The actual per-index counts kept by a backend + * + * This struct should contain only actual event counters, because we memcmp + * it against zeroes to detect whether there are any stats updates to apply. + * It is a component of PgStat_IndexStatus (within-backend state). + * + * tuples_returned is the number of index entries returned by + * the index AM, while tuples_fetched is the number of tuples successfully + * fetched by heap_fetch under the control of simple indexscans for this index. + * ---------- + */ +typedef struct PgStat_IndexCounts +{ + PgStat_Counter i_numscans; + + PgStat_Counter i_tuples_returned; + PgStat_Counter i_tuples_fetched; + PgStat_Counter i_blocks_fetched; + PgStat_Counter i_blocks_hit; +} PgStat_IndexCounts; + /* ---------- * PgStat_TableCounts The actual per-table counts kept by a backend * @@ -144,12 +167,9 @@ typedef struct PgStat_BackendSubEntry * it against zeroes to detect whether there are any stats updates to apply. * It is a component of PgStat_TableStatus (within-backend state). * - * Note: for a table, tuples_returned is the number of tuples successfully + * Note: tuples_returned is the number of tuples successfully * fetched by heap_getnext, while tuples_fetched is the number of tuples * successfully fetched by heap_fetch under the control of bitmap indexscans. - * For an index, tuples_returned is the number of index entries returned by - * the index AM, while tuples_fetched is the number of tuples successfully - * fetched by heap_fetch under the control of simple indexscans for this index. * * tuples_inserted/updated/deleted/hot_updated count attempted actions, * regardless of whether the transaction committed. delta_live_tuples, @@ -202,6 +222,22 @@ typedef struct PgStat_TableStatus Relation relation; /* rel that is using this entry */ } PgStat_TableStatus; +/* ---------- + * PgStat_IndexStatus Per-index status within a backend + * + * Many of the event counters are nontransactional, ie, we count events + * in committed and aborted transactions alike. For these, we just count + * directly in the PgStat_IndexStatus. + * ---------- + */ +typedef struct PgStat_IndexStatus +{ + Oid r_id; /* relation's OID */ + bool r_shared; /* is it a shared catalog? */ + PgStat_IndexCounts i_counts; /* event counts to be sent */ + Relation relation; /* rel that is using this entry */ +} PgStat_IndexStatus; + /* ---------- * PgStat_TableXactStatus Per-table, per-subtransaction status * ---------- @@ -420,6 +456,17 @@ typedef struct PgStat_StatTabEntry PgStat_Counter autoanalyze_count; } PgStat_StatTabEntry; +typedef struct PgStat_StatIndEntry +{ + PgStat_Counter numscans; + TimestampTz lastscan; + + PgStat_Counter tuples_returned; + PgStat_Counter tuples_fetched; + PgStat_Counter blocks_fetched; + PgStat_Counter blocks_hit; +} PgStat_StatIndEntry; + typedef struct PgStat_WalStats { PgStat_Counter wal_records; @@ -551,16 +598,15 @@ extern PgStat_FunctionCounts *find_funcstat_entry(Oid func_id); /* - * Functions in pgstat_relation.c + * Functions in pgstat_table.c */ -extern void pgstat_create_relation(Relation rel); -extern void pgstat_drop_relation(Relation rel); -extern void pgstat_copy_relation_stats(Relation dst, Relation src); +extern void pgstat_create_table(Relation rel); +extern void pgstat_drop_table(Relation rel); +extern void pgstat_init_table(Relation rel); -extern void pgstat_init_relation(Relation rel); -extern void pgstat_assoc_relation(Relation rel); -extern void pgstat_unlink_relation(Relation rel); +extern void pgstat_assoc_table(Relation rel); +extern void pgstat_unlink_table(Relation rel); extern void pgstat_report_vacuum(Oid tableoid, bool shared, PgStat_Counter livetuples, PgStat_Counter deadtuples); @@ -568,53 +614,83 @@ extern void pgstat_report_analyze(Relation rel, PgStat_Counter livetuples, PgStat_Counter deadtuples, bool resetcounter); +/* + * Functions in pgstat_index.c + */ + +extern void pgstat_create_index(Relation rel); +extern void pgstat_drop_index(Relation rel); +extern void pgstat_copy_index_stats(Relation dst, Relation src); +extern void pgstat_init_index(Relation rel); +extern void pgstat_assoc_index(Relation rel); +extern void pgstat_unlink_index(Relation rel); + /* * If stats are enabled, but pending data hasn't been prepared yet, call - * pgstat_assoc_relation() to do so. See its comment for why this is done - * separately from pgstat_init_relation(). + * pgstat_assoc_table() / pgstat_assoc_index() to do so. + * See their comment for why this is done separately from pgstat_init_table() + * and pgstat_init_index(). */ -#define pgstat_should_count_relation(rel) \ - (likely((rel)->pgstat_info != NULL) ? true : \ - ((rel)->pgstat_enabled ? pgstat_assoc_relation(rel), true : false)) +#define pgstat_should_count_table(rel) \ + (likely((rel)->pgstattab_info != NULL) ? true : \ + ((rel)->pgstat_enabled ? pgstat_assoc_table(rel), true : false)) + +#define pgstat_should_count_index(rel) \ + (likely((rel)->pgstatind_info != NULL) ? true : \ + ((rel)->pgstat_enabled ? pgstat_assoc_index(rel), true : false)) /* nontransactional event counts are simple enough to inline */ #define pgstat_count_heap_scan(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_numscans++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_numscans++; \ } while (0) #define pgstat_count_heap_getnext(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_tuples_returned++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_tuples_returned++; \ } while (0) #define pgstat_count_heap_fetch(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_tuples_fetched++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_tuples_fetched++; \ + } while (0) +#define pgstat_count_index_fetch(rel) \ + do { \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_tuples_fetched++; \ } while (0) #define pgstat_count_index_scan(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_numscans++; \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_numscans++; \ } while (0) #define pgstat_count_index_tuples(rel, n) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_tuples_returned += (n); \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_tuples_returned += (n); \ } while (0) -#define pgstat_count_buffer_read(rel) \ +#define pgstat_count_table_buffer_read(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_blocks_fetched++; \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_blocks_fetched++; \ } while (0) -#define pgstat_count_buffer_hit(rel) \ +#define pgstat_count_index_buffer_read(rel) \ do { \ - if (pgstat_should_count_relation(rel)) \ - (rel)->pgstat_info->t_counts.t_blocks_hit++; \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_blocks_fetched++; \ + } while (0) +#define pgstat_count_table_buffer_hit(rel) \ + do { \ + if (pgstat_should_count_table(rel)) \ + (rel)->pgstattab_info->t_counts.t_blocks_hit++; \ + } while (0) +#define pgstat_count_index_buffer_hit(rel) \ + do { \ + if (pgstat_should_count_index(rel)) \ + (rel)->pgstatind_info->i_counts.i_blocks_hit++; \ } while (0) - extern void pgstat_count_heap_insert(Relation rel, PgStat_Counter n); extern void pgstat_count_heap_update(Relation rel, bool hot); extern void pgstat_count_heap_delete(Relation rel); @@ -630,6 +706,10 @@ extern PgStat_StatTabEntry *pgstat_fetch_stat_tabentry(Oid relid); extern PgStat_StatTabEntry *pgstat_fetch_stat_tabentry_ext(bool shared, Oid reloid); extern PgStat_TableStatus *find_tabstat_entry(Oid rel_id); +extern PgStat_IndexStatus *find_indstat_entry(Oid rel_id); +extern PgStat_StatIndEntry *pgstat_fetch_stat_indentry(Oid relid); +extern PgStat_StatIndEntry *pgstat_fetch_stat_indentry_ext(bool shared, + Oid relid); /* diff --git a/src/include/utils/pgstat_internal.h b/src/include/utils/pgstat_internal.h index 6badb2fde4..26a780c76a 100644 --- a/src/include/utils/pgstat_internal.h +++ b/src/include/utils/pgstat_internal.h @@ -370,11 +370,17 @@ typedef struct PgStatShared_Database PgStat_StatDBEntry stats; } PgStatShared_Database; -typedef struct PgStatShared_Relation +typedef struct PgStatShared_Table { PgStatShared_Common header; PgStat_StatTabEntry stats; -} PgStatShared_Relation; +} PgStatShared_Table; + +typedef struct PgStatShared_Index +{ + PgStatShared_Common header; + PgStat_StatIndEntry stats; +} PgStatShared_Index; typedef struct PgStatShared_Function { @@ -573,16 +579,23 @@ extern void pgstat_io_snapshot_cb(void); /* - * Functions in pgstat_relation.c + * Functions in pgstat_table.c */ -extern void AtEOXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit); -extern void AtEOSubXact_PgStat_Relations(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth); -extern void AtPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state); -extern void PostPrepare_PgStat_Relations(PgStat_SubXactStatus *xact_state); +extern void AtEOXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit); +extern void AtEOSubXact_PgStat_Tables(PgStat_SubXactStatus *xact_state, bool isCommit, int nestDepth); +extern void AtPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state); +extern void PostPrepare_PgStat_Tables(PgStat_SubXactStatus *xact_state); + +extern bool pgstat_table_flush_cb(PgStat_EntryRef *entry_ref, bool nowait); +extern void pgstat_table_delete_pending_cb(PgStat_EntryRef *entry_ref); + +/* + * Functions in pgstat_index.c + */ -extern bool pgstat_relation_flush_cb(PgStat_EntryRef *entry_ref, bool nowait); -extern void pgstat_relation_delete_pending_cb(PgStat_EntryRef *entry_ref); +extern bool pgstat_index_flush_cb(PgStat_EntryRef *entry_ref, bool nowait); +extern void pgstat_index_delete_pending_cb(PgStat_EntryRef *entry_ref); /* diff --git a/src/include/utils/rel.h b/src/include/utils/rel.h index 67f994cb3e..7970011b83 100644 --- a/src/include/utils/rel.h +++ b/src/include/utils/rel.h @@ -248,7 +248,10 @@ typedef struct RelationData bool pgstat_enabled; /* should relation stats be counted */ /* use "struct" here to avoid needing to include pgstat.h: */ - struct PgStat_TableStatus *pgstat_info; /* statistics collection area */ + /* table's statistics collection area */ + struct PgStat_TableStatus *pgstattab_info; + /* Index's statistics collection area */ + struct PgStat_IndexStatus *pgstatind_info; } RelationData; diff --git a/src/test/isolation/expected/stats.out b/src/test/isolation/expected/stats.out index 61b5a710ec..494adee88b 100644 --- a/src/test/isolation/expected/stats.out +++ b/src/test/isolation/expected/stats.out @@ -2166,14 +2166,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2210,14 +2210,14 @@ step s2_table_update_k1: UPDATE test_stat_tab SET value = value + 1 WHERE key = step s1_table_drop: DROP TABLE test_stat_tab; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2236,14 +2236,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2275,14 +2275,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2314,14 +2314,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2369,14 +2369,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2401,14 +2401,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2463,14 +2463,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2495,14 +2495,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2558,14 +2558,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2627,14 +2627,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2688,14 +2688,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2755,14 +2755,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2795,14 +2795,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2841,14 +2841,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2881,14 +2881,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2927,14 +2927,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2968,14 +2968,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -3015,14 +3015,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' diff --git a/src/test/isolation/expected/stats_1.out b/src/test/isolation/expected/stats_1.out index 3854320106..7981747732 100644 --- a/src/test/isolation/expected/stats_1.out +++ b/src/test/isolation/expected/stats_1.out @@ -2174,14 +2174,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2218,14 +2218,14 @@ step s2_table_update_k1: UPDATE test_stat_tab SET value = value + 1 WHERE key = step s1_table_drop: DROP TABLE test_stat_tab; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2244,14 +2244,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2283,14 +2283,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2322,14 +2322,14 @@ pg_stat_force_next_flush step s1_track_counts_off: SET track_counts = off; step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2377,14 +2377,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2409,14 +2409,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2471,14 +2471,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2503,14 +2503,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2566,14 +2566,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2635,14 +2635,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2698,14 +2698,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2767,14 +2767,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2809,14 +2809,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2857,14 +2857,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2899,14 +2899,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2947,14 +2947,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -2990,14 +2990,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' @@ -3039,14 +3039,14 @@ pg_stat_force_next_flush step s1_table_stats: SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' diff --git a/src/test/isolation/specs/stats.spec b/src/test/isolation/specs/stats.spec index 5b922d788c..53d78f7db1 100644 --- a/src/test/isolation/specs/stats.spec +++ b/src/test/isolation/specs/stats.spec @@ -93,14 +93,14 @@ step s1_table_drop { DROP TABLE test_stat_tab; } step s1_table_stats { SELECT - pg_stat_get_numscans(tso.oid) AS seq_scan, - pg_stat_get_tuples_returned(tso.oid) AS seq_tup_read, - pg_stat_get_tuples_inserted(tso.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(tso.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(tso.oid) AS n_tup_del, - pg_stat_get_live_tuples(tso.oid) AS n_live_tup, - pg_stat_get_dead_tuples(tso.oid) AS n_dead_tup, - pg_stat_get_vacuum_count(tso.oid) AS vacuum_count + pg_stat_get_tab_numscans(tso.oid) AS seq_scan, + pg_stat_get_tab_tuples_returned(tso.oid) AS seq_tup_read, + pg_stat_get_tab_tuples_inserted(tso.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(tso.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(tso.oid) AS n_tup_del, + pg_stat_get_tab_live_tuples(tso.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(tso.oid) AS n_dead_tup, + pg_stat_get_tab_vacuum_count(tso.oid) AS vacuum_count FROM test_stat_oid AS tso WHERE tso.name = 'test_stat_tab' } diff --git a/src/test/recovery/t/029_stats_restart.pl b/src/test/recovery/t/029_stats_restart.pl index 83d6647d32..8b0b597419 100644 --- a/src/test/recovery/t/029_stats_restart.pl +++ b/src/test/recovery/t/029_stats_restart.pl @@ -43,8 +43,8 @@ my $sect = "initial"; is(have_stats('database', $dboid, 0), 't', "$sect: db stats do exist"); is(have_stats('function', $dboid, $funcoid), 't', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 't', "$sect: relation stats do exist"); +is(have_stats('table', $dboid, $tableoid), + 't', "$sect: table stats do exist"); # regular shutdown $node->stop(); @@ -67,8 +67,8 @@ $sect = "copy"; is(have_stats('database', $dboid, 0), 't', "$sect: db stats do exist"); is(have_stats('function', $dboid, $funcoid), 't', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 't', "$sect: relation stats do exist"); +is(have_stats('table', $dboid, $tableoid), + 't', "$sect: table stats do exist"); $node->stop('immediate'); @@ -84,8 +84,8 @@ $sect = "post immediate"; is(have_stats('database', $dboid, 0), 'f', "$sect: db stats do not exist"); is(have_stats('function', $dboid, $funcoid), 'f', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 'f', "$sect: relation stats do not exist"); +is(have_stats('table', $dboid, $tableoid), + 'f', "$sect: table stats do not exist"); # get rid of backup statsfile unlink $statsfile or die "cannot unlink $statsfile $!"; @@ -98,8 +98,8 @@ $sect = "post immediate, new"; is(have_stats('database', $dboid, 0), 't', "$sect: db stats do exist"); is(have_stats('function', $dboid, $funcoid), 't', "$sect: function stats do exist"); -is(have_stats('relation', $dboid, $tableoid), - 't', "$sect: relation stats do exist"); +is(have_stats('table', $dboid, $tableoid), + 't', "$sect: table stats do exist"); # regular shutdown $node->stop(); @@ -117,8 +117,7 @@ $sect = "invalid_overwrite"; is(have_stats('database', $dboid, 0), 'f', "$sect: db stats do not exist"); is(have_stats('function', $dboid, $funcoid), 'f', "$sect: function stats do not exist"); -is(have_stats('relation', $dboid, $tableoid), - 'f', "$sect: relation stats do not exist"); +is(have_stats('table', $dboid, $tableoid), 'f', "$sect: table do not exist"); ## check invalid stats file starting with valid contents, but followed by @@ -133,8 +132,8 @@ $sect = "invalid_append"; is(have_stats('database', $dboid, 0), 'f', "$sect: db stats do not exist"); is(have_stats('function', $dboid, $funcoid), 'f', "$sect: function stats do not exist"); -is(have_stats('relation', $dboid, $tableoid), - 'f', "$sect: relation stats do not exist"); +is(have_stats('table', $dboid, $tableoid), + 'f', "$sect: table stats do not exist"); ## checks related to stats persistency around restarts and resets diff --git a/src/test/recovery/t/030_stats_cleanup_replica.pl b/src/test/recovery/t/030_stats_cleanup_replica.pl index 51495aebcd..042ae55f17 100644 --- a/src/test/recovery/t/030_stats_cleanup_replica.pl +++ b/src/test/recovery/t/030_stats_cleanup_replica.pl @@ -179,7 +179,7 @@ sub test_standby_func_tab_stats_status my %stats; $stats{rel} = $node_standby->safe_psql($connect_db, - "SELECT pg_stat_have_stats('relation', $dboid, $tableoid)"); + "SELECT pg_stat_have_stats('table', $dboid, $tableoid)"); $stats{func} = $node_standby->safe_psql($connect_db, "SELECT pg_stat_have_stats('function', $dboid, $funcoid)"); diff --git a/src/test/regress/expected/rules.out b/src/test/regress/expected/rules.out index e953d1f515..5d6219fb51 100644 --- a/src/test/regress/expected/rules.out +++ b/src/test/regress/expected/rules.out @@ -1767,10 +1767,10 @@ pg_stat_all_indexes| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, i.relname AS indexrelname, - pg_stat_get_numscans(i.oid) AS idx_scan, - pg_stat_get_lastscan(i.oid) AS last_idx_scan, - pg_stat_get_tuples_returned(i.oid) AS idx_tup_read, - pg_stat_get_tuples_fetched(i.oid) AS idx_tup_fetch + pg_stat_get_ind_numscans(i.oid) AS idx_scan, + pg_stat_get_ind_lastscan(i.oid) AS last_idx_scan, + pg_stat_get_ind_tuples_returned(i.oid) AS idx_tup_read, + pg_stat_get_ind_tuples_fetched(i.oid) AS idx_tup_fetch FROM (((pg_class c JOIN pg_index x ON ((c.oid = x.indrelid))) JOIN pg_class i ON ((i.oid = x.indexrelid))) @@ -1779,28 +1779,28 @@ pg_stat_all_indexes| SELECT c.oid AS relid, pg_stat_all_tables| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - pg_stat_get_numscans(c.oid) AS seq_scan, - pg_stat_get_lastscan(c.oid) AS last_seq_scan, - pg_stat_get_tuples_returned(c.oid) AS seq_tup_read, - (sum(pg_stat_get_numscans(i.indexrelid)))::bigint AS idx_scan, - max(pg_stat_get_lastscan(i.indexrelid)) AS last_idx_scan, - ((sum(pg_stat_get_tuples_fetched(i.indexrelid)))::bigint + pg_stat_get_tuples_fetched(c.oid)) AS idx_tup_fetch, - pg_stat_get_tuples_inserted(c.oid) AS n_tup_ins, - pg_stat_get_tuples_updated(c.oid) AS n_tup_upd, - pg_stat_get_tuples_deleted(c.oid) AS n_tup_del, - pg_stat_get_tuples_hot_updated(c.oid) AS n_tup_hot_upd, - pg_stat_get_live_tuples(c.oid) AS n_live_tup, - pg_stat_get_dead_tuples(c.oid) AS n_dead_tup, - pg_stat_get_mod_since_analyze(c.oid) AS n_mod_since_analyze, - pg_stat_get_ins_since_vacuum(c.oid) AS n_ins_since_vacuum, - pg_stat_get_last_vacuum_time(c.oid) AS last_vacuum, - pg_stat_get_last_autovacuum_time(c.oid) AS last_autovacuum, - pg_stat_get_last_analyze_time(c.oid) AS last_analyze, - pg_stat_get_last_autoanalyze_time(c.oid) AS last_autoanalyze, - pg_stat_get_vacuum_count(c.oid) AS vacuum_count, - pg_stat_get_autovacuum_count(c.oid) AS autovacuum_count, - pg_stat_get_analyze_count(c.oid) AS analyze_count, - pg_stat_get_autoanalyze_count(c.oid) AS autoanalyze_count + pg_stat_get_tab_numscans(c.oid) AS seq_scan, + pg_stat_get_tab_lastscan(c.oid) AS last_seq_scan, + pg_stat_get_tab_tuples_returned(c.oid) AS seq_tup_read, + (sum(pg_stat_get_ind_numscans(i.indexrelid)))::bigint AS idx_scan, + max(pg_stat_get_ind_lastscan(i.indexrelid)) AS last_idx_scan, + ((sum(pg_stat_get_ind_tuples_fetched(i.indexrelid)))::bigint + pg_stat_get_tab_tuples_fetched(c.oid)) AS idx_tup_fetch, + pg_stat_get_tab_tuples_inserted(c.oid) AS n_tup_ins, + pg_stat_get_tab_tuples_updated(c.oid) AS n_tup_upd, + pg_stat_get_tab_tuples_deleted(c.oid) AS n_tup_del, + pg_stat_get_tab_tuples_hot_updated(c.oid) AS n_tup_hot_upd, + pg_stat_get_tab_live_tuples(c.oid) AS n_live_tup, + pg_stat_get_tab_dead_tuples(c.oid) AS n_dead_tup, + pg_stat_get_tab_mod_since_analyze(c.oid) AS n_mod_since_analyze, + pg_stat_get_tab_ins_since_vacuum(c.oid) AS n_ins_since_vacuum, + pg_stat_get_tab_last_vacuum_time(c.oid) AS last_vacuum, + pg_stat_get_tab_last_autovacuum_time(c.oid) AS last_autovacuum, + pg_stat_get_tab_last_analyze_time(c.oid) AS last_analyze, + pg_stat_get_tab_last_autoanalyze_time(c.oid) AS last_autoanalyze, + pg_stat_get_tab_vacuum_count(c.oid) AS vacuum_count, + pg_stat_get_tab_autovacuum_count(c.oid) AS autovacuum_count, + pg_stat_get_tab_analyze_count(c.oid) AS analyze_count, + pg_stat_get_tab_autoanalyze_count(c.oid) AS autoanalyze_count FROM ((pg_class c LEFT JOIN pg_index i ON ((c.oid = i.indrelid))) LEFT JOIN pg_namespace n ON ((n.oid = c.relnamespace))) @@ -2237,9 +2237,9 @@ pg_stat_wal_receiver| SELECT pid, pg_stat_xact_all_tables| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - pg_stat_get_xact_numscans(c.oid) AS seq_scan, + pg_stat_get_tab_xact_numscans(c.oid) AS seq_scan, pg_stat_get_xact_tuples_returned(c.oid) AS seq_tup_read, - (sum(pg_stat_get_xact_numscans(i.indexrelid)))::bigint AS idx_scan, + (sum(pg_stat_get_ind_xact_numscans(i.indexrelid)))::bigint AS idx_scan, ((sum(pg_stat_get_xact_tuples_fetched(i.indexrelid)))::bigint + pg_stat_get_xact_tuples_fetched(c.oid)) AS idx_tup_fetch, pg_stat_get_xact_tuples_inserted(c.oid) AS n_tup_ins, pg_stat_get_xact_tuples_updated(c.oid) AS n_tup_upd, @@ -2290,8 +2290,8 @@ pg_statio_all_indexes| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, i.relname AS indexrelname, - (pg_stat_get_blocks_fetched(i.oid) - pg_stat_get_blocks_hit(i.oid)) AS idx_blks_read, - pg_stat_get_blocks_hit(i.oid) AS idx_blks_hit + (pg_stat_get_ind_blocks_fetched(i.oid) - pg_stat_get_ind_blocks_hit(i.oid)) AS idx_blks_read, + pg_stat_get_ind_blocks_hit(i.oid) AS idx_blks_hit FROM (((pg_class c JOIN pg_index x ON ((c.oid = x.indrelid))) JOIN pg_class i ON ((i.oid = x.indexrelid))) @@ -2300,31 +2300,31 @@ pg_statio_all_indexes| SELECT c.oid AS relid, pg_statio_all_sequences| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - (pg_stat_get_blocks_fetched(c.oid) - pg_stat_get_blocks_hit(c.oid)) AS blks_read, - pg_stat_get_blocks_hit(c.oid) AS blks_hit + (pg_stat_get_ind_blocks_fetched(c.oid) - pg_stat_get_tab_blocks_hit(c.oid)) AS blks_read, + pg_stat_get_tab_blocks_hit(c.oid) AS blks_hit FROM (pg_class c LEFT JOIN pg_namespace n ON ((n.oid = c.relnamespace))) WHERE (c.relkind = 'S'::"char"); pg_statio_all_tables| SELECT c.oid AS relid, n.nspname AS schemaname, c.relname, - (pg_stat_get_blocks_fetched(c.oid) - pg_stat_get_blocks_hit(c.oid)) AS heap_blks_read, - pg_stat_get_blocks_hit(c.oid) AS heap_blks_hit, + (pg_stat_get_tab_blocks_fetched(c.oid) - pg_stat_get_tab_blocks_hit(c.oid)) AS heap_blks_read, + pg_stat_get_tab_blocks_hit(c.oid) AS heap_blks_hit, i.idx_blks_read, i.idx_blks_hit, - (pg_stat_get_blocks_fetched(t.oid) - pg_stat_get_blocks_hit(t.oid)) AS toast_blks_read, - pg_stat_get_blocks_hit(t.oid) AS toast_blks_hit, + (pg_stat_get_tab_blocks_fetched(t.oid) - pg_stat_get_tab_blocks_hit(t.oid)) AS toast_blks_read, + pg_stat_get_tab_blocks_hit(t.oid) AS toast_blks_hit, x.idx_blks_read AS tidx_blks_read, x.idx_blks_hit AS tidx_blks_hit FROM ((((pg_class c LEFT JOIN pg_class t ON ((c.reltoastrelid = t.oid))) LEFT JOIN pg_namespace n ON ((n.oid = c.relnamespace))) - LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_blocks_fetched(pg_index.indexrelid) - pg_stat_get_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, - (sum(pg_stat_get_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit + LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_ind_blocks_fetched(pg_index.indexrelid) - pg_stat_get_ind_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, + (sum(pg_stat_get_ind_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit FROM pg_index WHERE (pg_index.indrelid = c.oid)) i ON (true)) - LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_blocks_fetched(pg_index.indexrelid) - pg_stat_get_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, - (sum(pg_stat_get_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit + LEFT JOIN LATERAL ( SELECT (sum((pg_stat_get_ind_blocks_fetched(pg_index.indexrelid) - pg_stat_get_ind_blocks_hit(pg_index.indexrelid))))::bigint AS idx_blks_read, + (sum(pg_stat_get_ind_blocks_hit(pg_index.indexrelid)))::bigint AS idx_blks_hit FROM pg_index WHERE (pg_index.indrelid = t.oid)) x ON (true)) WHERE (c.relkind = ANY (ARRAY['r'::"char", 't'::"char", 'm'::"char"])); diff --git a/src/test/regress/expected/stats.out b/src/test/regress/expected/stats.out index 186c296299..a821192004 100644 --- a/src/test/regress/expected/stats.out +++ b/src/test/regress/expected/stats.out @@ -151,6 +151,117 @@ FROM prevstats AS pr; COMMIT; ---- +-- Basic tests for toast +--- +CREATE TABLE stats_toast(stuff text); +ALTER TABLE stats_toast ALTER COLUMN stuff SET STORAGE EXTERNAL; +INSERT INTO stats_toast VALUES (repeat('a',1000000)); +SELECT count(*) FROM stats_toast WHERE stuff like '%a%'; + count +------- + 1 +(1 row) + +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + pg_stat_force_next_flush +-------------------------- + +(1 row) + +select toast_blks_read > 0 as toast_blks_read, toast_blks_hit > 0 as toast_blks_hit, + tidx_blks_read > 0 as tidx_blks_read, tidx_blks_hit > 0 as tidx_blks_hit, + toast_blks_hit >= toast_blks_read, + tidx_blks_hit >= tidx_blks_read + from pg_statio_all_tables + where relname = 'stats_toast'; + toast_blks_read | toast_blks_hit | tidx_blks_read | tidx_blks_hit | ?column? | ?column? +-----------------+----------------+----------------+---------------+----------+---------- + t | t | t | t | t | t +(1 row) + +---- +-- Basic tests for partition +--- +CREATE TABLE stats_partition ( + id1 int not null, + id2 int not null +) PARTITION BY RANGE (id2); +CREATE TABLE stats_partition_5 PARTITION OF stats_partition + FOR VALUES FROM (0) TO (5); +CREATE TABLE stats_partition_20000 PARTITION OF stats_partition + FOR VALUES FROM (5) TO (20001); +CREATE INDEX ON stats_partition (id2); +insert into stats_partition select a,a from generate_series(0,20000) a; +SET enable_seqscan TO off; +SET enable_bitmapscan TO off; +select * from stats_partition where id2 = 2000; + id1 | id2 +------+------ + 2000 | 2000 +(1 row) + +select * from stats_partition where id2 = 2; + id1 | id2 +-----+----- + 2 | 2 +(1 row) + +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + pg_stat_force_next_flush +-------------------------- + +(1 row) + +select relname, indexrelname, idx_scan > 0 as idx_scan, idx_tup_read > 0 as idx_tup_read, + idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | indexrelname | idx_scan | idx_tup_read | idx_tup_fetch +-----------------------+-------------------------------+----------+--------------+--------------- + stats_partition_20000 | stats_partition_20000_id2_idx | t | t | t + stats_partition_5 | stats_partition_5_id2_idx | t | t | t +(2 rows) + +select relname, indexrelname, idx_blks_read > 0 as idx_blks_read, + idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | indexrelname | idx_blks_read | idx_blks_hit +-----------------------+-------------------------------+---------------+-------------- + stats_partition_20000 | stats_partition_20000_id2_idx | t | t + stats_partition_5 | stats_partition_5_id2_idx | t | t +(2 rows) + +select relname,seq_scan > 0 as seq_scan, seq_tup_read > 0 as seq_tup_read, + idx_scan > 0 as idx_scan, idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | seq_scan | seq_tup_read | idx_scan | idx_tup_fetch +-----------------------+----------+--------------+----------+--------------- + stats_partition | f | f | f | f + stats_partition_20000 | t | f | t | t + stats_partition_5 | t | f | t | t +(3 rows) + +select relname, heap_blks_read > 0 as heap_blks_read, heap_blks_hit > 0 as heap_blks_hit, + idx_blks_read > 0 as idx_blks_read, idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + relname | heap_blks_read | heap_blks_hit | idx_blks_read | idx_blks_hit +-----------------------+----------------+---------------+---------------+-------------- + stats_partition_20000 | t | t | t | t + stats_partition_5 | t | t | t | t +(2 rows) + +SET enable_seqscan TO on; +SET enable_bitmapscan TO on; +---- -- Basic tests for track_functions --- CREATE FUNCTION stats_test_func1() RETURNS VOID LANGUAGE plpgsql AS $$BEGIN END;$$; @@ -357,17 +468,17 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) DROP TABLE drop_stats_test; -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); - pg_stat_get_live_tuples -------------------------- - 0 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 0 (1 row) SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_oid); @@ -378,18 +489,18 @@ SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_oid); -- check that rollback protects against having stats dropped and that local -- modifications don't pose a problem -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 1 -(1 row) - -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples ----------------------------- 1 (1 row) +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 1 +(1 row) + SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); pg_stat_get_xact_tuples_inserted ---------------------------------- @@ -418,29 +529,29 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted ------------------------------ - 2 +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 2 (1 row) -- transactional drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted ------------------------------ - 2 +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 2 (1 row) BEGIN; @@ -465,23 +576,23 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); - pg_stat_get_live_tuples -------------------------- - 0 -(1 row) - -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); - pg_stat_get_tuples_inserted +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); + pg_stat_get_tab_live_tuples ----------------------------- 0 (1 row) +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); + pg_stat_get_tab_tuples_inserted +--------------------------------- + 0 +(1 row) + -- savepoint rollback (2 levels) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 1 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 1 (1 row) BEGIN; @@ -510,17 +621,17 @@ SELECT pg_stat_force_next_flush(); (1 row) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) -- savepoint rolback (1 level) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) BEGIN; @@ -529,17 +640,17 @@ DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; ROLLBACK TO SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) -- and now actually drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 3 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 3 (1 row) BEGIN; @@ -548,10 +659,10 @@ DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; RELEASE SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); - pg_stat_get_live_tuples -------------------------- - 0 +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); + pg_stat_get_tab_live_tuples +----------------------------- + 0 (1 row) DROP TABLE trunc_stats_test, trunc_stats_test1, trunc_stats_test2, trunc_stats_test3, trunc_stats_test4; @@ -1021,21 +1132,21 @@ select a from stats_test_tab1 where a = 3; 3 (1 row) -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t (1 row) -- pg_stat_have_stats returns false for dropped index with stats -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t (1 row) DROP index stats_test_idx1; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- f @@ -1051,14 +1162,14 @@ select a from stats_test_tab1 where a = 3; 3 (1 row) -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t (1 row) ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- f @@ -1073,7 +1184,7 @@ select a from stats_test_tab1 where a = 3; 3 (1 row) -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t @@ -1081,7 +1192,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); REINDEX index CONCURRENTLY stats_test_idx1; -- false for previous oid -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- f @@ -1089,7 +1200,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); -- true for new oid SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t @@ -1097,7 +1208,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns true for a rolled back drop index with stats BEGIN; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t @@ -1105,7 +1216,7 @@ SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); DROP index stats_test_idx1; ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); pg_stat_have_stats -------------------- t diff --git a/src/test/regress/sql/stats.sql b/src/test/regress/sql/stats.sql index d7f873cfc9..a97bc6fe09 100644 --- a/src/test/regress/sql/stats.sql +++ b/src/test/regress/sql/stats.sql @@ -126,6 +126,77 @@ FROM prevstats AS pr; COMMIT; +---- +-- Basic tests for toast +--- +CREATE TABLE stats_toast(stuff text); +ALTER TABLE stats_toast ALTER COLUMN stuff SET STORAGE EXTERNAL; +INSERT INTO stats_toast VALUES (repeat('a',1000000)); +SELECT count(*) FROM stats_toast WHERE stuff like '%a%'; + +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + +select toast_blks_read > 0 as toast_blks_read, toast_blks_hit > 0 as toast_blks_hit, + tidx_blks_read > 0 as tidx_blks_read, tidx_blks_hit > 0 as tidx_blks_hit, + toast_blks_hit >= toast_blks_read, + tidx_blks_hit >= tidx_blks_read + from pg_statio_all_tables + where relname = 'stats_toast'; + +---- +-- Basic tests for partition +--- +CREATE TABLE stats_partition ( + id1 int not null, + id2 int not null +) PARTITION BY RANGE (id2); + +CREATE TABLE stats_partition_5 PARTITION OF stats_partition + FOR VALUES FROM (0) TO (5); + +CREATE TABLE stats_partition_20000 PARTITION OF stats_partition + FOR VALUES FROM (5) TO (20001); + +CREATE INDEX ON stats_partition (id2); + +insert into stats_partition select a,a from generate_series(0,20000) a; + +SET enable_seqscan TO off; +SET enable_bitmapscan TO off; + +select * from stats_partition where id2 = 2000; +select * from stats_partition where id2 = 2; +-- ensure pending stats are flushed +SELECT pg_stat_force_next_flush(); + +select relname, indexrelname, idx_scan > 0 as idx_scan, idx_tup_read > 0 as idx_tup_read, + idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +select relname, indexrelname, idx_blks_read > 0 as idx_blks_read, + idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_indexes + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +select relname,seq_scan > 0 as seq_scan, seq_tup_read > 0 as seq_tup_read, + idx_scan > 0 as idx_scan, idx_tup_fetch > 0 as idx_tup_fetch + from pg_stat_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +select relname, heap_blks_read > 0 as heap_blks_read, heap_blks_hit > 0 as heap_blks_hit, + idx_blks_read > 0 as idx_blks_read, idx_blks_hit > 0 as idx_blks_hit + from pg_statio_all_tables + where relname like '%stats_partition%' + order by relname COLLATE "C"; + +SET enable_seqscan TO on; +SET enable_bitmapscan TO on; + ---- -- Basic tests for track_functions --- @@ -218,15 +289,15 @@ SELECT 'drop_stats_test_subxact'::regclass::oid AS drop_stats_test_subxact_oid \ SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); DROP TABLE drop_stats_test; -SELECT pg_stat_get_live_tuples(:drop_stats_test_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_oid); SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_oid); -- check that rollback protects against having stats dropped and that local -- modifications don't pose a problem -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); BEGIN; INSERT INTO drop_stats_test_xact DEFAULT VALUES; @@ -235,12 +306,12 @@ DROP TABLE drop_stats_test_xact; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); ROLLBACK; SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); -- transactional drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); BEGIN; INSERT INTO drop_stats_test_xact DEFAULT VALUES; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); @@ -248,11 +319,11 @@ DROP TABLE drop_stats_test_xact; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid); COMMIT; SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid); -SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_xact_oid); +SELECT pg_stat_get_tab_tuples_inserted(:drop_stats_test_xact_oid); -- savepoint rollback (2 levels) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); BEGIN; INSERT INTO drop_stats_test_subxact DEFAULT VALUES; SAVEPOINT sp1; @@ -264,27 +335,27 @@ ROLLBACK TO SAVEPOINT sp2; SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_subxact_oid); COMMIT; SELECT pg_stat_force_next_flush(); -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); -- savepoint rolback (1 level) -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); BEGIN; SAVEPOINT sp1; DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; ROLLBACK TO SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); -- and now actually drop -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); BEGIN; SAVEPOINT sp1; DROP TABLE drop_stats_test_subxact; SAVEPOINT sp2; RELEASE SAVEPOINT sp1; COMMIT; -SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid); +SELECT pg_stat_get_tab_live_tuples(:drop_stats_test_subxact_oid); DROP TABLE trunc_stats_test, trunc_stats_test1, trunc_stats_test2, trunc_stats_test3, trunc_stats_test4; DROP TABLE prevstats; @@ -493,40 +564,40 @@ CREATE index stats_test_idx1 on stats_test_tab1(a); SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset SET enable_seqscan TO off; select a from stats_test_tab1 where a = 3; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns false for dropped index with stats -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); DROP index stats_test_idx1; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns false for rolled back index creation BEGIN; CREATE index stats_test_idx1 on stats_test_tab1(a); SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset select a from stats_test_tab1 where a = 3; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns true for reindex CONCURRENTLY CREATE index stats_test_idx1 on stats_test_tab1(a); SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset select a from stats_test_tab1 where a = 3; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); REINDEX index CONCURRENTLY stats_test_idx1; -- false for previous oid -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- true for new oid SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- pg_stat_have_stats returns true for a rolled back drop index with stats BEGIN; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); DROP index stats_test_idx1; ROLLBACK; -SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid); +SELECT pg_stat_have_stats('index', :dboid, :stats_test_idx1_oid); -- put enable_seqscan back to on SET enable_seqscan TO on; diff --git a/src/tools/pgindent/typedefs.list b/src/tools/pgindent/typedefs.list index 097f42e1b3..6cebdb026a 100644 --- a/src/tools/pgindent/typedefs.list +++ b/src/tools/pgindent/typedefs.list @@ -2026,10 +2026,11 @@ PgStatShared_Database PgStatShared_Function PgStatShared_HashEntry PgStatShared_IO -PgStatShared_Relation +PgStatShared_Index PgStatShared_ReplSlot PgStatShared_SLRU PgStatShared_Subscription +PgStatShared_Table PgStatShared_Wal PgStat_ArchiverStats PgStat_BackendSubEntry @@ -2043,6 +2044,7 @@ PgStat_FetchConsistency PgStat_FunctionCallUsage PgStat_FunctionCounts PgStat_HashKey +PgStat_IndexStatus PgStat_IO PgStat_Kind PgStat_KindInfo ^ permalink raw reply [nested|flat] 281+ messages in thread
end of thread, other threads:[~2023-03-16 09:24 UTC | newest] Thread overview: 281+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2020-09-12 13:07 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-12 13:07 [PATCH 2/5] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/7] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/9] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2020-09-17 15:26 [PATCH 2/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 2/6] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-02 18:27 [PATCH 4/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-21 23:24 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2021-03-21 23:24 [PATCH 3/8] Move IS [NOT] NULL handling from BRIN support functions Tomas Vondra <[email protected]> 2023-03-16 09:24 Re: Split index and table statistics into different types of stats Drouvot, Bertrand <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox