public inbox for [email protected]help / color / mirror / Atom feed
[PATCH v1] elog.c: Remove special case which avoided %*s format strings.. 21+ messages / 2 participants [nested] [flat]
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. @ 2020-08-01 02:53 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Justin Pryzby @ 2020-08-01 02:53 UTC (permalink / raw) ..which should no longer be needed since it was a performance hack for specific platform snprintf, which are no longer used. See also: 4334639f4 Allow printf-style padding specifications in log_line_prefix. 96bf88d52 Always use our own versions of *printf(). abd9ca377 Make assorted performance improvements in snprintf.c. --- src/backend/utils/error/elog.c | 134 ++++++++------------------------- 1 file changed, 32 insertions(+), 102 deletions(-) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index d0b368530e..6b6749965f 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -2350,11 +2350,6 @@ log_line_prefix(StringInfo buf, ErrorData *edata) * Note: Since only '-', '0' to '9' are valid formatting characters we * can do a quick check here to pre-check for formatting. If the char * is not formatting then we can skip a useless function call. - * - * Further note: At least on some platforms, passing %*s rather than - * %s to appendStringInfo() is substantially slower, so many of the - * cases below avoid doing that unless non-zero padding is in fact - * specified. */ if (*p > '9') padding = 0; @@ -2371,10 +2366,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (appname == NULL || *appname == '\0') appname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, appname); - else - appendStringInfoString(buf, appname); + appendStringInfo(buf, "%*s", padding, appname); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2392,10 +2384,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) else backend_type_str = GetBackendTypeDesc(MyBackendType); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, backend_type_str); - else - appendStringInfoString(buf, backend_type_str); + appendStringInfo(buf, "%*s", padding, backend_type_str); break; } case 'u': @@ -2405,10 +2394,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (username == NULL || *username == '\0') username = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, username); - else - appendStringInfoString(buf, username); + appendStringInfo(buf, "%*s", padding, username); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2421,17 +2407,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) if (dbname == NULL || *dbname == '\0') dbname = _("[unknown]"); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, dbname); - else - appendStringInfoString(buf, dbname); + appendStringInfo(buf, "%*s", padding, dbname); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'c': - if (padding != 0) { char strfbuf[128]; @@ -2439,14 +2421,9 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) (MyStartTime), MyProcPid); appendStringInfo(buf, "%*s", padding, strfbuf); } - else - appendStringInfo(buf, "%lx.%x", (long) (MyStartTime), MyProcPid); break; case 'p': - if (padding != 0) - appendStringInfo(buf, "%*d", padding, MyProcPid); - else - appendStringInfo(buf, "%d", MyProcPid); + appendStringInfo(buf, "%*d", padding, MyProcPid); break; case 'P': @@ -2472,17 +2449,11 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'l': - if (padding != 0) - appendStringInfo(buf, "%*ld", padding, log_line_number); - else - appendStringInfo(buf, "%ld", log_line_number); + appendStringInfo(buf, "%*ld", padding, log_line_number); break; case 'm': setup_formatted_log_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_log_time); - else - appendStringInfoString(buf, formatted_log_time); + appendStringInfo(buf, "%*s", padding, formatted_log_time); break; case 't': { @@ -2492,10 +2463,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) pg_strftime(strfbuf, sizeof(strfbuf), "%Y-%m-%d %H:%M:%S %Z", pg_localtime(&stamp_time, log_timezone)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 'n': @@ -2512,19 +2480,13 @@ log_line_prefix(StringInfo buf, ErrorData *edata) (long) saved_timeval.tv_sec, (int) (saved_timeval.tv_usec / 1000)); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, strfbuf); - else - appendStringInfoString(buf, strfbuf); + appendStringInfo(buf, "%*s", padding, strfbuf); } break; case 's': if (formatted_start_time[0] == '\0') setup_formatted_start_time(); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, formatted_start_time); - else - appendStringInfoString(buf, formatted_start_time); + appendStringInfo(buf, "%*s", padding, formatted_start_time); break; case 'i': if (MyProcPort) @@ -2533,10 +2495,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) int displen; psdisp = get_ps_display(&displen); - if (padding != 0) - appendStringInfo(buf, "%*s", padding, psdisp); - else - appendBinaryStringInfo(buf, psdisp, displen); + appendStringInfo(buf, "%*s", padding, psdisp); } else if (padding != 0) @@ -2546,37 +2505,24 @@ log_line_prefix(StringInfo buf, ErrorData *edata) case 'r': if (MyProcPort && MyProcPort->remote_host) { - if (padding != 0) + if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') { - if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0') - { - /* - * This option is slightly special as the port - * number may be appended onto the end. Here we - * need to build 1 string which contains the - * remote_host and optionally the remote_port (if - * set) so we can properly align the string. - */ - - char *hostport; - - hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); - appendStringInfo(buf, "%*s", padding, hostport); - pfree(hostport); - } - else - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); + /* + * This option is slightly special as the port + * number may be appended onto the end. Here we + * need to build 1 string which contains the + * remote_host and optionally the remote_port (if + * set) so we can properly align the string. + */ + + char *hostport; + + hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port); + appendStringInfo(buf, "%*s", padding, hostport); + pfree(hostport); } else - { - /* padding is 0, so we don't need a temp buffer */ - appendStringInfoString(buf, MyProcPort->remote_host); - if (MyProcPort->remote_port && - MyProcPort->remote_port[0] != '\0') - appendStringInfo(buf, "(%s)", - MyProcPort->remote_port); - } - + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); } else if (padding != 0) appendStringInfoSpaces(buf, @@ -2584,12 +2530,7 @@ log_line_prefix(StringInfo buf, ErrorData *edata) break; case 'h': if (MyProcPort && MyProcPort->remote_host) - { - if (padding != 0) - appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); - else - appendStringInfoString(buf, MyProcPort->remote_host); - } + appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host); else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); @@ -2604,32 +2545,21 @@ log_line_prefix(StringInfo buf, ErrorData *edata) /* keep VXID format in sync with lockfuncs.c */ if (MyProc != NULL && MyProc->backendId != InvalidBackendId) { - if (padding != 0) - { - char strfbuf[128]; + char strfbuf[128]; - snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", - MyProc->backendId, MyProc->lxid); + snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u", + MyProc->backendId, MyProc->lxid); appendStringInfo(buf, "%*s", padding, strfbuf); - } - else - appendStringInfo(buf, "%d/%u", MyProc->backendId, MyProc->lxid); } else if (padding != 0) appendStringInfoSpaces(buf, padding > 0 ? padding : -padding); break; case 'x': - if (padding != 0) - appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); - else - appendStringInfo(buf, "%u", GetTopTransactionIdIfAny()); + appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny()); break; case 'e': - if (padding != 0) - appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); - else - appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode)); + appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode)); break; default: /* format error - ignore it */ -- 2.17.0 --pAwQNkOnpTn9IO2O-- ^ permalink raw reply [nested|flat] 21+ messages in thread
* Re: Remove extra Sort node above a btree-compatible Index Scan @ 2025-02-28 05:43 Tom Lane <[email protected]> 0 siblings, 0 replies; 21+ messages in thread From: Tom Lane @ 2025-02-28 05:43 UTC (permalink / raw) To: Alexandra Wang <[email protected]>; +Cc: pgsql-hackers Alexandra Wang <[email protected]> writes: > I’ve attached a patch that removes this unnecessary Sort node for > B-tree-compatible indexes. This does not look right at all. You can't just ignore the opfamily etc. while deciding whether two pathkeys represent the same sort ordering, as you did in create_mergejoin_plan(). I don't like pathkeys_have_same_sortop() either. The pathkey data structures were designed to let pointer comparison be sufficient for deciding whether pathkeys are equivalent: see the "canonical pathkey" stuff in pathkeys.c. I think that this patch may be band-aiding over some breakage of that concept, but you've not provided enough context to figure out what the underlying problem is. regards, tom lane ^ permalink raw reply [nested|flat] 21+ messages in thread
end of thread, other threads:[~2025-02-28 05:43 UTC | newest] Thread overview: 21+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2020-08-01 02:53 [PATCH v1] elog.c: Remove special case which avoided %*s format strings.. Justin Pryzby <[email protected]> 2025-02-28 05:43 Re: Remove extra Sort node above a btree-compatible Index Scan Tom Lane <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox