public inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
45+ messages / 2 participants
[nested] [flat]

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-03 12:00 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-03 12:00 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

copyreadline we would incorrectly interpret the sequence as an end-of-copy
marker (\.). this can only happen in encodings that can "embed" ascii
characters as the second byte. one example of such sequence is
'\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.
---
 src/backend/commands/copyfromparse.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index 798e18e013..c20ec482db 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,17 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * In principle, we would need to use pg_encoding_mblen() to
+				 * skip over the character in some encodings, like at the end
+				 * of the loop.  But if it's a multi-byte character, it cannot
+				 * have any special meaning and skipping isn't necessary for
+				 * correctness.  We can fall through to process it normally
+				 * instead.
 				 */
-				raw_buf_ptr++;
+				if (!IS_HIGHBIT_SET(c2))
+					raw_buf_ptr++;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------97F3138F3612F1A4F9200D93--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing.
@ 2021-02-04 19:36 Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Heikki Linnakangas @ 2021-02-04 19:36 UTC (permalink / raw)

If a multi-byte character is escaped with a backslash in TEXT mode input,
we didn't always treat the escape correctly. If:

- a multi-byte character is escaped with a backslash, and
- the second byte of the character is 0x5C, i.e. the ASCII code of a
  backslash (\), and
- the next character is a dot (.), then

CopyReadLineText function would incorrectly interpret the sequence as an
end-of-copy marker (\.). This can only happen in encodings that can
"embed" ascii characters as the second byte. One example of such sequence
is '\x5ca45c2e666f6f' in Big5 encoding. If you put that in a file, and
load it with COPY FROM, you'd incorrectly get an "end-of-copy marker
corrupt" error.

Backpatch to all supported versions.

Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
---
 src/backend/commands/copyfromparse.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/backend/commands/copyfromparse.c b/src/backend/commands/copyfromparse.c
index b843d315b1..315b16fd7a 100644
--- a/src/backend/commands/copyfromparse.c
+++ b/src/backend/commands/copyfromparse.c
@@ -1084,7 +1084,7 @@ CopyReadLineText(CopyFromState cstate)
 				break;
 			}
 			else if (!cstate->opts.csv_mode)
-
+			{
 				/*
 				 * If we are here, it means we found a backslash followed by
 				 * something other than a period.  In non-CSV mode, anything
@@ -1095,8 +1095,16 @@ CopyReadLineText(CopyFromState cstate)
 				 * backslashes are not special, so we want to process the
 				 * character after the backslash just like a normal character,
 				 * so we don't increment in those cases.
+				 *
+				 * Set 'c' to skip whole character correctly in multi-byte
+				 * encodings.  If we don't have the whole character in the
+				 * buffer yet, we might loop back to process it, after all,
+				 * but that's OK because multi-byte characters cannot have any
+				 * special meaning.
 				 */
 				raw_buf_ptr++;
+				c = c2;
+			}
 		}
 
 		/*
-- 
2.30.0


--------------CFC80B40DFDD66DF067F288D--





^ permalink  raw  reply  [nested|flat] 45+ messages in thread

* SyncRepWaitForLSN waits for XLogFlush?
@ 2023-05-24 14:53 Tejasvi Kashi <[email protected]>
  0 siblings, 0 replies; 45+ messages in thread

From: Tejasvi Kashi @ 2023-05-24 14:53 UTC (permalink / raw)
  To: [email protected]

Hi everyone,

I was wondering if waiting for an LSN in SyncRepWaitForLSN ensures that the
XLOG has been flushed locally up to that location before the record is
shipped off to standbys?

Regards,
Tej


^ permalink  raw  reply  [nested|flat] 45+ messages in thread

end of thread, other threads:[~2023-05-24 14:53 UTC | newest]

Thread overview: 45+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-03 12:00 [PATCH 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2021-02-04 19:36 [PATCH v2 1/1] Fix a corner-case in COPY FROM backslash processing. Heikki Linnakangas <[email protected]>
2023-05-24 14:53 SyncRepWaitForLSN waits for XLogFlush? Tejasvi Kashi <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox