public inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
46+ messages / 1 participants
[nested] [flat]

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v8 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ffb1308a0c..8e753f1efd 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4512,7 +4514,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4521,10 +4522,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4536,7 +4537,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4562,11 +4567,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5669,6 +5675,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--XsQoSWH+UP9D9v3l
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v8-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v8 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ffb1308a0c..8e753f1efd 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4512,7 +4514,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4521,10 +4522,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4536,7 +4537,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4562,11 +4567,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5669,6 +5675,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--XsQoSWH+UP9D9v3l
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v8-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v9 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 3349bcfaa7..bf7fd6e8ae 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4569,7 +4571,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4578,10 +4579,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4593,7 +4594,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4619,11 +4624,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5730,6 +5736,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--IS0zKkzwUGydFO0o
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v9-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v6 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index b2457a6924..b990063d38 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4513,7 +4515,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4522,10 +4523,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4537,7 +4538,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4563,11 +4568,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5670,6 +5676,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--LZvS9be/3tNcYl/X
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v6-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 511f015a86..2784fb11f9 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4393,7 +4395,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4402,10 +4403,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4417,7 +4418,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4443,11 +4448,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5545,6 +5551,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--J/dobhs11T7y2rNN
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v3-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index ac53f79ada..07f4f562ee 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -157,6 +157,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -354,7 +356,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4326,7 +4328,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4335,10 +4336,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4350,7 +4351,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4376,11 +4381,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5455,6 +5461,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--ikeVEW9yuYc//A+q
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v1-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation
@ 2020-07-14 00:15 Alvaro Herrera <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Alvaro Herrera @ 2020-07-14 00:15 UTC (permalink / raw)

This means that ATExecCmd relies on AlteredRelationInfo->rel instead of
keeping the relation as a local variable; this is useful if the
subcommand needs to modify the relation internally.  For example, a
subcommand that internally commits its transaction needs this.
---
 src/backend/commands/tablecmds.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 993da56d43..a8528a3423 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -156,6 +156,8 @@ typedef struct AlteredTableInfo
 	Oid			relid;			/* Relation to work on */
 	char		relkind;		/* Its relkind */
 	TupleDesc	oldDesc;		/* Pre-modification tuple descriptor */
+	/* Transiently set during Phase 2, normally set to NULL */
+	Relation	rel;
 	/* Information saved by Phase 1 for Phase 2: */
 	List	   *subcmds[AT_NUM_PASSES]; /* Lists of AlterTableCmd */
 	/* Information saved by Phases 1/2 for Phase 3: */
@@ -353,7 +355,7 @@ static void ATPrepCmd(List **wqueue, Relation rel, AlterTableCmd *cmd,
 					  AlterTableUtilityContext *context);
 static void ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 							  AlterTableUtilityContext *context);
-static void ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+static void ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 					  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 					  AlterTableUtilityContext *context);
 static AlterTableCmd *ATParseTransformCmd(List **wqueue, AlteredTableInfo *tab,
@@ -4405,7 +4407,6 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 		{
 			AlteredTableInfo *tab = (AlteredTableInfo *) lfirst(ltab);
 			List	   *subcmds = tab->subcmds[pass];
-			Relation	rel;
 			ListCell   *lcmd;
 
 			if (subcmds == NIL)
@@ -4414,10 +4415,10 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			/*
 			 * Appropriate lock was obtained by phase 1, needn't get it again
 			 */
-			rel = relation_open(tab->relid, NoLock);
+			tab->rel = relation_open(tab->relid, NoLock);
 
 			foreach(lcmd, subcmds)
-				ATExecCmd(wqueue, tab, rel,
+				ATExecCmd(wqueue, tab,
 						  castNode(AlterTableCmd, lfirst(lcmd)),
 						  lockmode, pass, context);
 
@@ -4429,7 +4430,11 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
 			if (pass == AT_PASS_ALTER_TYPE)
 				ATPostAlterTypeCleanup(wqueue, tab, lockmode);
 
-			relation_close(rel, NoLock);
+			if (tab->rel)
+			{
+				relation_close(tab->rel, NoLock);
+				tab->rel = NULL;
+			}
 		}
 	}
 
@@ -4455,11 +4460,12 @@ ATRewriteCatalogs(List **wqueue, LOCKMODE lockmode,
  * ATExecCmd: dispatch a subcommand to appropriate execution routine
  */
 static void
-ATExecCmd(List **wqueue, AlteredTableInfo *tab, Relation rel,
+ATExecCmd(List **wqueue, AlteredTableInfo *tab,
 		  AlterTableCmd *cmd, LOCKMODE lockmode, int cur_pass,
 		  AlterTableUtilityContext *context)
 {
 	ObjectAddress address = InvalidObjectAddress;
+	Relation	rel = tab->rel;
 
 	switch (cmd->subtype)
 	{
@@ -5562,6 +5568,7 @@ ATGetQueueEntry(List **wqueue, Relation rel)
 	 */
 	tab = (AlteredTableInfo *) palloc0(sizeof(AlteredTableInfo));
 	tab->relid = relid;
+	tab->rel = NULL;			/* set later */
 	tab->relkind = rel->rd_rel->relkind;
 	tab->oldDesc = CreateTupleDescCopyConstr(RelationGetDescr(rel));
 	tab->newrelpersistence = RELPERSISTENCE_PERMANENT;
-- 
2.20.1


--/04w6evG8XlLl3ft
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
 filename="v5-0002-ALTER-TABLE-.-DETACH-CONCURRENTLY.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

end of thread, other threads:[~2020-07-14 00:15 UTC | newest]

Thread overview: 46+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v8 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v8 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v9 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v6 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v3 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v1 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>
2020-07-14 00:15 [PATCH v5 1/2] Let ALTER TABLE exec routines deal with the relation Alvaro Herrera <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox